francorios (not verified)

Beside small doll combs, take a look at pet grooming combs.

When I went to the dog groomers supply store I could take my choice of a dozen different fine toothed combs.

I'm thinking a person might thread the comb then put a thin stick (craft stick/popsicle stick) across the teeth to hold the thread in place? That's something I've never tried before.

Have a good day!

Franco Rios

Caroline (not verified)

I've seen pictures of a comb upside down used as a warp spacer on a cardboard box loom - I thought that was pretty nifty! You can also use the longer thinner combs to hold the warp on the top edge of a flat cardboard loom. The handle gives you something to hold the loom with too, so you don't have to mess up what you have woven.

marywareodc (not verified)

Hi

I found myself doing DIY by default - when I wanted things for spinning & weaving.  First I made a peg loom - and made a thick stripy rug with some of my 1st spinning attempts.  A friend has now borrowed it so the craft is contagious.  A few months back I built my own 4 shaft table loom when a friend gave me the 4 shafts and levers from her Ashford table loom - she had just upgraded to an 8 shaft.  So I made a frame around them from bits of pine bedstead, rollers from thick dowelling, a 5 dent reed from ice lolly sticks, and bought the ratchet & pawl sets for Ashford looms.  And basically made it up as I went along from pictures.  The heddles are string (crochet cotton) - some are a bit too loose but more or less work.  And so far it has made a silk / wool scarf, a wrap, and a warp faced scarf all from hand spun yarn.  I'm now persualding it to let me do a 4 shaft krokbragd bag, if I can keep the warp tight enough.  So far so good.

I'm also just having a 2nd go at a pair of small wool combs - torture instruments and totally lethal, and I'm hoping to replace the warping frame I made with something stronger.  We're lucky to have quite a few power tools here - but a couple of 6 week woodwork courses at school 30 years ago have had unexpected uses!  Nothing quite matches or is perfectly straight - so I'm into 'good-enough' DIY!

Some pictures on my flickr page if I can link it here www.flickr.com/photos/maryware/

Glad to see this group here - I've been haunting the Ravelry DIY group for months.

claudia (not verified)

OOOOh, would love to see pictures of your loom and things you have woven on it.  Can you post here?  Just use the image icon on the top bar of the reply section and follow these instructions: http://www.weavolution.com/node/1328

Thanks for sharing all the wonderful things you have made, Mary.  All I can claim is that I have tricked out my loom in various ways to get the things I wanted, like lease stick holders for the back of the loom.   I bought a Tools of the Trade 8 harness loom last year and I have been fixing it up as needed. 

                                                      Here's the back of the TOTT loom.

Claudia

marywareodc (not verified)

OK here goes (but remember I'm a bit of a beginning weaver!)

hope this doesn't overload the forum!  I haven't got pics of the latest scarf yet.  The other woven things on my flickr page were done with an old 2-shaft box loom that found its way to me last year - and got me wanting more shafts!  I envy you for 8 - it looks a lovely loom - but I have a lot of exploring to do with my 4 yet.

marywareodc (not verified)

If you blocked every other 'dent' between the comb teeth (with epoxy resin glue or wood filler or something?) you'd have a home-made rigid heddle reed.

phnorque (not verified)

First admired looms for their fine wook work.  Only later did I come to appreciate them for what they could do.  Finally got my chance when I was able to create a weaving class for institutionalized adults.  Thanks to the kindness of Judy and Bob at Gilmore Looms, I set the shop up with four 40 inch and two 44 inch eight harness floor looms, as well as six of their superb inkle looms.  The patients took to the weaving like ducks to water.  Native American patients asked if they might have their own  style looms.  I desligned two six foot tall by four foot wide verticle southwest style looms and had them build in the institution's mill and cabinet shop.  Patients producted everything from inkle woven straps for the Brazilian style drum band and guitar straps for the music depart ment, to rugs, wraps, runners and wall hangings.  Times changed. I moved on.

My bride gave me a four harness, 40 inch Gilmore for my very own for a recent wedding anniversary.  Now, I'm looking forward to starting on my first rug on my own loom.

Toady (not verified)

Hi, my name is Emma and I live on the lovely east coast of Australia. I'm a spinner and crocheter and want to delve into the world of weaving. Although I have yet to make anything I have been looking at the 'patterns' for simple frame looms and just have a few questions... Is it at all possible to use picture frames for frame looms? I have a bunch of un-used 4 inch by 6 inch frames that I thought I would be able to make small bookmarks and so forth on, and instead of throwing them out why not put them to use.

I'm also studying and as usual college rooms aren't known for their space and with a spinning wheel, drum carder and TV taking prime positions I need something small and portible. I'm also going to try out Backstrap Weaving, although at the moment it's sitting in the 'too hard' basket as my brain doesn't want to process all the information I've got so far.

Look forward to talking to you all and sharing pictures of my DIY weaving.

Em

esmecat (not verified)

Hi Emma,

yes, you can make a frame loom from a recycled picture frame! although, one bit of advice someone mentioned was that picture frames aren't always built as sturdily as could be hoped... artist's canvas strecher bars or a recycled streched canvas with the canvas pulled off are sturdier options. but free can trump sturdy.

don't think backstrap weaving it too hard! it really isn't. i just finished my first length of fabric on my backstrap and loved it.

Jen

Cathos (not verified)

All of the previous posts are a little hard to follow. People seem to be creating things I wouldn't even attempt!

So far, I've cut up an old wooden laundry rack to get a tapestry frame loom (and since discovered that tapestry is not for me, at least not yet) and used the rest of it as a frame for tablet weaving on. I've also built a rather wonky inkle loom for tablet weaving as well as making my own tablets. I've recently finished a wood and nail raddle and am hoping for a dry weather day so I can go outside and drill holes in what will be a warping board. I've also, also made an impromptu reed hook from a stiff piece of plastic.

Cathos