claudia (not verified)

I have been using a borrowed skein winder and would love to build my own. Will you share how you made it with the group (and me, too : ) Claudia

esmecat (not verified)

my backstrap loom was put together for me by a friend... and it just has a braided length of cotton yarns for a backstrap. finding a good, stable, strong backstrap is one of the things i think will help improve my weaving immensely...

another is learning how to tie onto the dowels as i roll up the completed weaving so that it doesn't try to unroll on me as i lean back...

and i also need to learn how to tie onto a doorknob so that it does want to lean one way or the other. tieing on stabely is giving me fits.

Jen

Caroline (not verified)

Hi, I'm Caroline in South Australia and I've been making my own spinning and weaving equipment for longer than I care to remember! My first loom was a backstrap, and I found S-hooks invaluable.  As for holding the fabric and/or the warp, why not take a leaf out of the loom manufacturer's book and use a square piece of wood? Its much easier to clamp a couple of flat pieces of wood together than round ones.

At the moment I'm into small looms. I use artists stretcher frames as they are handy and very cheap, and I have also made a couple of small tapestry looms using MDF cut-outs from my local craft shop ( its just had a sale, hehe!).

 I have electric spinning wheels in various stages of completion, and I make and sell drop spindles.

My inspiration was the Rachel Brown Weaving Spinning and Dyeing Book which is probably the best introduction you could get to weaving and spinning on a budget.

You can find some of my experiments on my website here:

www.spinningdownunder.com/

Including the  link to Franco's cardboard charkha, which is amazing as it really works - he tends to keep his light hiding under a bushel, that one!

Well, I'm off for a morning coffee, I'm never civilised until I've had a few!

francorios (not verified)

Franco Rios checks in

I see Caroline is saying nice things about me behind my back again! (smile)

I did design a cardboard spinning wheel/charkha and I have made the design free for anyone to use if they want to make their own.

I started a Cardboard Spinning wheel topic under the DIY Forum here on Weavolution

http://www.weavolution.com/node/3487

Have a good day!

Franco Rios, Sacramento, Calif.

esmecat (not verified)

thank you for posting those picture links! 

i do have a a 2nd dowel for rolling up on.... but as i looked at your photos, i had a DUH moment. you roll towards the underside and have the strap coming up around the dowel. i was rolling up towards the top and had my strap attached on top... and it would always try to unroll that last flip of the roll. thanks :) now i think it should stay put for me.

i will have to see if i can find a better place to fasten to. at the moment, i'm using a doorknob. the biggest problem with that is that the loop i make to hook over the knob never ends up centered in my strap... so it doesn't get even tension across the bar. flipping i could deal with... but bad tension just isn't good. i'm considering trying to make another loop to slip the strap through... that way the loop could self center on the strap.

esmecat (not verified)

OH! MY! your site is wonderful! i will have to spend some serious time reading through it. thank you for posting it.

and thank you so much for the book recomendation! it looks really good. i'm going to have to order a copy right away!

uwimoore (not verified)

Hi!! I'm a new weaver who wants to make a mini wooden loom, I was inspired by one I saw last week. It was really tiny, maybe 2" X 4".  

It seemed simple enough since it uses 2 halves of a hair comb for heddles and those heddles sit in groves cut horizontally across the loom.  Would anyone have any instructions for the loom I'm describing or something like it

Caroline (not verified)

Hi, I've just made a tiny tapestry loom from a very small artists canvas stretcher: I used dressmaking pins to make the pegs, and promptly regretted trying to put in a staggered second row to get a smaller epi. You could experiment with a couple of dolls combs, as long as they have straigh teeth, otherwise an adults or childs comb is going to be too big to do the job. One way of fixing them to make a rigid heddle would be to glue the tips of the teeth of one comb interlocking between the teeth of the other comb, so you have 2 staggered sets of slots - this should, in theory at any rate, be enough to move the warp up and down to create 2 sheds. I haven't played with my loom yet so I don't know how anything this size copes with tension and the thread manipulations required to place the weft, so I'm interested to see how you go. Please post pictures!

uwimoore (not verified)

Thanks for the suggestions I'll post it as soon as I can.