BonnieI (not verified)

Erik, is your loom a mechanical dobby loom like the one in the photo?  Dobby bars and pegs are great for lots of structures, once you learn how to use and manipulate them. It is so much more comfortable to move pegs than it is to redo the tie-up on a traditional floor loom, especially one with 16 shafts.

You need to have access to the side of the loom with the dobby head, whether it is a compu-dobby or a mechanical dobby. The other side of the loom could go next to a wall, assuming you do not have a flyshuttle. You need to be able to walk to the back of the loom, naturally, for warping and for fixing broken threads, etc, but you could walk past the dobby side.

Where do you live? I have two AVL looms in my cabin near Crested Butte, one from 1987 (that ad looks familiar) and the other was bought in 1994.

Bonnie Inouye, author of Exploring Multishaft Design

Threshkin (not verified)

Hi Bonnie,

Yes, I have the mechanical dobby, with 152 bars and over 800 pegs!  I don't know the exact age but this is one of the first of the Production looms.  It is old enough that it does not have a serial number and it is labeled Ahrens & Violette Looms instead of just AVL.  I do not have a fly shuttle.

The ad is a stock picture of what my loom will look like after assembly.  Mine is maple and appears to be in pretty good shape except for the dobby which needs new cords.  The lady I got it from is a master weaver down in Manitou Springs.  She was the original owner and took good care of it.

I live in the south end of Denver.  Despite my best pruning efforts my loom collection keeps growing.  I have my Clement set up for a weft faced blanket project, but my beautiful cherry Loomcraft is languishing in pieces in the closet.  The living room holds a Nadeau being rehabbed and I have a little Dorothy that I will use for workshops if I ever find the time. 

Does your book cover design for 16 shaft looms?  Our guild library probably has it available.  If not I am on the acquisitions committee.  I am excited about the design possibilities of both 16 shafts and the dobby and am researching weave structures and design like I am a new weaver again. 

Erik

 

BonnieI (not verified)

hi Erik,

I expect that my book is in your guild library. I know it is in the Boulder guild library as I was a member of HGB for many years. I wove all of the samples shown in the book, and my only looms at the time had 16 shafts. So nearly all the examples are for 16 shafts. There are no recipes in this book. It is designed to be a workshop that you take at your own loom. It has been used as a study guide for a year or two for a bunch of weaving study groups (for 8 or more shafts) and for some college courses as a textbook. There are step by step exercises to follow to create new drafts exploring certain aspects or structures. I give an example next to each step and my examples are for 16 shafts. The last 2 chapters (10 in all) are more general and one of them covers using 8, 12, 24, and other numbers, plus converting a draft that you might have made for one loom but need to use a different number of shafts the next time around.

It is possible to do all the exercises in my book with 8 shafts but I think it is harder to do them on 8 than with 12 or more shafts. With 16, it is easy to follow all the steps but might be tempting to take my examples and just use them. Believe me, I have seen a lot of scarves, towels, etc woven from the drafts that are shown as examples in my book!  I did not intend for this to happen but I guess a lot of people do not read the text in an article or in a book- they just look at the pictures.

There is a study group of your guild for weavers using 8 and more shafts. Most of those people have my book- many of them took one or both of the workshops that I taught in Denver this past April. I will see some of them at Complex Weavers next week, which should be great.

Hope this helps.

There are specific tips in my book for people with bars and pegs. I made a drawing of my AVL bars and pegs and used it to indicate paragraphs of special interest for mechanical dobby looms.

Erik, do you have weaving software? It helps a lot!  FiberworksPCW lets you print a liftplan (pegplan) with the same spacing as the AVL bars and pegs.

Bonnie

Threshkin (not verified)

Hi Bonnie,

I do not have weaving software yet.  I am used to designing structures and tie ups on paper for my 8 shaft loom.  What color of Fiberworks PCW should I get?  Do I need Silver Plus to get the lift plan capability?

Have you been approached regarding doing another workshop in the 2011 season?  I am on the workshop committee but someone else may have contacted you already.

Thanks!

Erik

Caroline (not verified)

HI, can you give details of the book you found this in, please. Page number, diagram number etc would help. What draft does this tie up belong to? also what type of 4 shaft loom?

It does seem a bit odd. I wonder if there is a miss-print in among that lot. Its a bit hard to say without knowing the context in which its used.  Some of the older books use different methods of showing tie-ups, draw-downs, threadings, etc depending on where the author studied, so it can get quite confusing.

Evelyn (not verified)

I had  justread that article by Cheryl Kolander as well as another with quite the opposite opinion.  It looks like a lot of hassle to use with all the warnings and respirators etc. and then the disposing of the left over water. 

As you say - there are lots of options and I guess I am curious because of when I was researching the feverfew and that was the only mordant mentioned.

I am certainly not sure if I want to use chrome at all but have a 50gm bag that was in a box of natural dye stuff purchased from an estate sale.   So it sits and I don't even know how to dispose of it if I don't want to use it.  For now I keep it in a tightly closed container within a container!

crosstownshuttler (not verified)

Hi Alison,

I have a 15 dent reed you can have if it fits. What kind of beater does your loom have, if any? I am aware of 2 types, but there could be more. Could you post a couple of photos of your loom so we can see what will fit?

Carie

crosstownshuttler (not verified)

Hi Alison,

I have a 15 dent reed you can have if it fits. What kind of beater does your loom have, if any? I am aware of 2 types, but there could be more. Could you post a couple of photos of your loom so we can see what will fit?

Carie

Alison (not verified)

Carie,

I'm so excited!!  I have some of the pieces.  I'll PM you now.

Thanks so much!!!

andsewon (not verified)

Hi, Just thought I'd post to let you know that Gowdey Reed can now make the reeds for the 8" structo looms. I sent him my beater frame and reed so that he could see exactly the size and style that is needed. Now that he's made mine for me, he has the specs and can make them for anyone. www.gowdeyreed.com Jim Wilson Best wishes, Connie, a very happy customer