Hello

I'm a beginner to backstrap weaving so I know the problem is something I am doing.  I have a rigid heddle and have single warp. By that I mean it is not continuous. It is tied off at the base stick that i hold to me with the backstrap.

I began my weaving with a few hefty rows of header to try to keep my warp separate and in place. I couldn't seem to get the twining to work no matter what I did, even though I have seen others use this method to control and separate warp. My weaving progressed well at the beginning, straight, using the heddle as a beater as it is meant to be and having other tools to beat or separate the warps if i felt it was necessary.

My problem now is that my warp keeps drawing in and I realised today when I had a good look at my weaving that even though it looks nice, its shrinking and I cannot use the heddle as a beater as the weaving from both ends is no longer even with the warp, its drawn and all the warp appears to be tight and shrunken. Its hard to explain but i'm sure experienced weavers know what I mean.

I am going to UNweave everything I've done as I'm just not prepared to accept such an obvious mistake.

Can any of you tell me what I'm doing wrong and how to correct the mistake so I don't do it anymore? I don't have a temple that I've seen others mention and anything I have or use has to be something I make. How do I make sure the weaving remains even all the way along? I'm frustrated with myself but have no intentions of giving up, just keep trying until i get it right.

Thanks all

Sharon

Comments

villageweaver (not verified)

Try increasing the angle of your weft and make sure you're not tugging too much when you complete throwing the shot. (not sure if that translates to backstrap weaving or not!)

Mary

Caroline (not verified)

hi Sharon, what you are experiencing is something that happens to everyone who uses a RH on a backstrap - you feel like you need 3 hands, grrrr! 

When you put through a shot of weft leave it loose. Let it arch away from the fell line. Gently put it in place and use your fingers to make sure its not drawing in. A lot of weavers here will change shed, and then beat gently, because changing shed holds the yarn in place better. You can even leave a little loop of weft and only adjust it AFTER you use the RH to put the weft in place. The only time you need to use any force or strength on the heddle is if you are doing a warp faced weave. I beat after I've changed shed on my knitters loom and its very easy to develop a rhythm to your weaving.

After this its just practice and experience. We all do it slightly different and no one way is better than another.

And there are no weaving police!

 

Sharonl (not verified)

Ahhh thank you.

I thought I was leaving the warp loose enough, but obviously I wasn't.  I'll follow all the suggestions. I think I've been concentrating so much on not having loose loops at the edges that I forgot to check if it was too tight and didn't make any adjustments as I went along.

 

bolivian warmi

Hi Sharon,

For your next project, if you want to do a twined start, backstrap group member Franco did a wonderful tutorial which you can see here......

www.weavolution.com/node/5197

What are you weaving, by the way and how wide is your warp?

bolivian warmi

One question...just so I will be prepared when I get my RH loom out....is this only a problem when you use the RH with a backstrap or is this something to watch out for on the loom as well? I imagine it would happen in both set ups?

francorios (not verified)

Hi Sharon,

I have the same struggle with selvedges drawing in. Just like you said, I concentrate so much on not having loose loops n the edges that forgot to check if it was too tight.

That is constant thing I am working on to improve my weaving.

I found a temple/stretcher can be easily built with a ruler and some paper clips, see article on my blog

http://francosfiberadventure.blogspot.com/search?q=temple

One of the members of this forum says she makes temples from bamboo stakes she buys at Lowes garden shop. Section of bamboo and a couple of finishing nails would do good.

I was just telling somebody else I should use temples more often, not just on my rigid heddle but on my backstrap stuff as well.

I know what you mean about twining to keep spacing. I read about it when I first started weaving and it just didn't seem to work, so I don't twine to keep spacing, but I find it useful for making a nice edge.

Have a good day!

Caroline (not verified)

Selvedges drawing in are a problem on all looms. And there are as many little tricks to overcome this as there are loom types. Beating after you change sheds is one remedy, stretchers or temples another, and double threading the sides of your piece helps too because it makes the selvedge stronger. Generally the selvedge is nice and neat one side, and a bit off the other, and the more you worry about it, the worse it becomes!

If you keep the RH close on the backstrap loom the warp threads won't have a chance to draw in too far. On a RH loom, the end of the weaving is only a matter of inches from the heddle - you need enough room to make the shed and get the shuttle through, and no more. Push the RH too far back and the warps will want to draw in. You will need to advance the warp every few inches to keep the weaving space close to you and at its easiest, which might seem a bit of a pain, but it makes for neater edges, and better weaving.

I hope this makes sense. I'm only on my second cuppa! so the brain isn't quite in gear yet.

bolivian warmi

Caroline just put up a great link for all things rigid heddly on the RH group and while sifting through that I found a nice article on making good selvedges on the rigid heddle loom which I guess will apply to using the rigid heddle on the loom or with a backstrap-not having done either myself, I can't say for sure. Anyawy, here is the link and many thanks to Caroline.

askthebellwether.blogspot.com/2008/12/how-do-you-get-good-selvedges.html

Sharonl (not verified)

Thank you everyone for your excellent advice.

I unwove my work, carefully spaced it, did a few rows of heavy yarn for a header and glory of glories, actually managed to do a twine thanks to Franco's great instructions. I sat and grinned at it like a gormless idiot for a while quietly proud of myself then got on with trying to weave.

I've done about and hour of weaving and so far it looks great, straight and even, no pulling, no wonky lines. I do have loops occasionally along the edge but the link at bellwether has solved that for me I think. A bigger smile and keep an eye on the edge. I like the idea of a double warp for the edges for my next attempt but for now I'm weaving slowly, checking every row, making finger adjustments, beating GENTLY, checking edges, checking measurement with a ruler and everything else I can think of to keep it straight.

Okay I realise that's overkill but  if i do it every single row for the entire length hopefully it'll be second nature by the end.

The weave is 35 cm wide.  What it will be is yet to be determined. If it comes off the loom the way I hope it may be a very long stole/shawl with an intricate macrame style fringe. If it comes off heavy and not to my liking it will become somebody's table runner lol. Either way I'm hoping I will be happy enough to enter it into our local agricultural show next July.

If not it doesn't matter, its all about the joy in the journey of learning anyway.

Sharon

 

bolivian warmi

Hooray! And all that checking is not overkill. I always have a ruler next to me and go checking width to the millimeter every now and then-you can catch any tendencies to narrow or sometimes widen straight away and then make the necessary adjustments-saves the heartbreaking unpicking. Hopefully by next July you will have a bunch of things to offer.

Submitted by Anonymous (not verified) on