Since discovering inkle/tablet weaving my table loom sits neglected. I would like to attempt a wider (about 12 - 14 inches) tablet/card woven (threaded in pattern) project on the table loom and have ideas requiring input from more experienced weavers. My sense is that I should warp the loom from back to front with the reed/beater in place and once the warp has been rolled on to the back beam that the reed/beater would then be removed (attempting to keep all the threads in order) and the cards then threaded and tied to the front rod. Does this sound logical? And how can I best safeguard that the threads are in order once the reed is removed? All thoughts, suggestions and ideas welcome. With thanks.