I liked what I saw from the forum post that had these, so I thought I would see if I could make a pair. One 1 x 3 inch poplar board 24 inches long cut in half, 4 - 5 inch long 1/4 inch carriage bolts with wingnuts and on 8 foot long piece of screen lattice cut in half and edges sanded ---all from Home Depot. I had a scrap piece of hardwood to make the two small blocks and just a matter of drilling bolt holes and stick holes with a 1 and 1/2 inch holesaw with 1/2 chuck electric drill and then MORE sanding. This is still plain unfinished wood. After I try it and with yarn then I will come back and put a coat of varnish on them.