Greetings All and welcome!

The goal for this project is to explore pick up lace.  The type of project and its scope is entirely up to the weaver.  I'll be weaving a scarf with blocks of lace alternating across the width.  Since I've never attempted this pattern before, it'll be interesting to see what shows up.   I  am assuming some familiarity with warping the loom and using pick up sticks to make floats. Feel free to ask questions on these and any points, but the instructions I'll be giving are going to focus on the pick up patterns themselves. : )

 

Materials:

  • 1 Warped RH Loom (size and heddle determined by the weaver)
  • 1-2 shuttles
  • 1 pick up stick used as pattern stick

Directions:

Insert pick up stick behind the heddle in the down position.  The pattern to pick up: lift 1 up, 2 down on the slot threads.  Pick up as many of these repeats as you want to create the desired pattern block.

To weave weft floats: 

2 rows of plain weave.

1 row: heddle in the up position.

1 row: heddle in the neutral position and pattern stick (aka pick up stick) turned on its edge.

1 row: heddle in the up position

1 row: heddle in the neutral positiona nd pattern stick turned on its edge

1 row :: heddle up

1 row: heddle down

Repeat this as often as you want. 

To weave warp floats:

heddle up

heddle down

heddle up with stick forward behind the heddle

heddle down

heddle up with stick forward behind the heddle

heddle down.

This is just about the most basic pattern.  I'll be posting others later this week. 

 

Comments

WeekendWeaver (not verified)

By the way, I've been meaning to ask: 

How familiar are you all with reading weaving drafts? I am thinking of adapting other patterns and the best way to explain is actually through the drafts. 

Apologies to all for the delay. I've had some sick children to care for.  : (

djfiberarts (not verified)

I'm weak on reading drafts and really want to learn. I have the Davenport book. Not sure if she covers reading RH drafts in there.

DJ

WeekendWeaver (not verified)

Hi All,

I've posted a pdf in the drafts section of Weavolution.  It's called Lace Pick Up.  It doesn't have a "drawdown," but the document does break down how the different "shafts" work. I've adapted it from a 1994 article that Betty Davenport wrote for Handwoven.

I'll be trying to do something similar with four-shaft  Bronson Lace.

For further advice check out the Bellwhether's blog (aka Amelia) I found this really useful. 

Here's the link: http://askthebellwether.blogspot.com/2009/02/how-can-i-use-weaving-draft-on-my-rigid.html

Finally, if anyone has other Bronson patterns they've adapted, please let us know. 

claudia (not verified)

Excellent.  I went to the Drafts tab and found "Lace Pick up".  When I clicked on it the description of the project came up.  Then, I clicked on the link and it opened in Adobe Reader and I was able to print the draft.  Perfect.

Now, I'm all set.  I have the draft, I have the yarn and I have calculated the needed amounts of warp and weft using the Weaving Calculator under the Resources tab.  I am planning on winding enough warp for 2 scarves plus about 12" for a little sample.  I am using wool that is new to me so I am curious about shrinkage and want to test it before I invest time and money into the project.

Thanks for doing all this Laura, and with sick kids no less.  You are wonderful.  I am so excited, can't wait to get started.

Do I need to tell you how much weaving I have done since we started Weavolution?  LOL.  I'm having too much fun to worry about it.

Claudia

PattyAnne (not verified)

I cannot read drafts.  Would love to learn!  I have the Davenport book.

djfiberarts (not verified)

I'm only barely understanding the pattern directions. Are the directions saying we have to do the lace repeats in a certain sequence or can we do whatever sequence we want? For example, I started this morning and started the piece with 12 rows of plain weave. Then, 2 repeats of 5/1 weft pick up. Then 6 rows plain. Then 2 repeats of 5/1 warp pick up. Is that ok, or is this draft telling me I have to do whatever it is it's trying to tell me (which I'll figure out eventually...my tiny brain just hurts right now).

From the pattern directions, I understand that the treadling part is saying do the Bronson lace pattern. I understand what the tie-up is saying but the co-relation between the tie-up and the harnesses part of the pattern is Greek to me.

DJ

WeekendWeaver (not verified)

Hi DJ,

I'm doing about 3 inches of the lace pattern and then weaving an inch of plain weave.  What you're doing is fine if you like the result.  The pattern weave can be as small or as large as you want it to be.  The draft I posted only shows 2 lace repeats across.  The weaving directions (heddle up/ stick up, etc) only show one unit of the lace. You'd weave as many or as few of these as you'd want.

Harness 1: what is threaded through your holes

Harness 2: what you've put on the pick up stick

Harness 3: the remaining slot threads

I'm using a 12 epi heddle, so I've broken my pick up in this way: 

(1 up, 2 down) repeated 6 times about 2 inches

(12 up) about 1 inch

(1 up, 2 down) repeated 6 times

(12 up)

And so on across the warp.   The "12 up" threads will make blocks of plain weave.  I'm not at home right now, so I'll have to check with my tape measure to be sure of the exact size of my lace "blocks."

Currently, I've only been using weft floats.  I'm about to throw an inch of plain weave and will weave 3 inches of the lace using warp floats.

bolivian warmi

wow, sounds like you are all progressing really fast. I am just looking on. Any photos to post yet-even if it's just a wee bit. I don't know what bronson lace looks like.

Laverne

claudia (not verified)

I finally got the warp on and threaded tonight.  My back is killing me but it was worth it.  I'll start a sample tomorrow to make sure the weft I have chosen will work and to check shrinkage.  This warp and weft are new to me, I have not woven with them before.

I'll try to get some pictures up once I start weaving.

Thanks for the additional explanation Laura.  I'm looking forward to getting started tomorrow or Thursday.

Claudia

WeekendWeaver (not verified)

I'd post, but I'm not happy with the weft I've been using. It's all sleazy (slippery) . : (  Thankfully I'm sampling here with it to see if it works.  The yarn is beautiful, but doesn't grab the warp as it should.  I'll be switching to something else tomorrow.

 

 

WeekendWeaver (not verified)

BTW, if you've a copy of Davenport's Textures and Patterns, the weft float lace is described on pg 13 and pictured in a project on pg 18. This refers to the second edition. 

Hope this helps!  : ) Laura

claudia (not verified)

DJ,

I am always looking for ways to improve Weavolution and have noticed that people tend not to post pictures here.  Can you help me understand why?

Thanks,

Claudia, Weavolution co-founder

francorios (not verified)

Because the Inser/Edit Image feature is not very friendly. Clicking on that gives me on "Image Properties" box with the "Image Info" tab preselected and a "Browse Server" button. No clues on the box to tell me how it works.

Here is a suggestion.

Make the third tab which is "Upload" the default setting. That is what we hope to see when we hit that Insert/Edit Image option, because most people expect to UPLOAD their pictures. The "Image Info" feature would be more for advanced users. I get confused by the ImageInfo feature myself.

Have a good day!

claudia (not verified)

That's very helpful input and a good suggestion.

Thanks, Franco.

Claudia

djfiberarts (not verified)

Because I'm really dumb and I can't figure out how to do it. Ok...just kidding. When I went to post the picture using the little icon on the tool bar, it took me to the Image Properties pop up box. So I chose the upload tab and tried to upload from there but that was a bit confusing. Other peoples files came up and at that point I was a little nervous, not wanting to accidentally delete or put my stuff in someone else's folder. But I tried it and wound up back at the Image Properties pop up box again. I thought it would be a dummy proof kind of upload like blogger has, but it is a bit more involved.

DJ

bolivian warmi

Hey DJ,

I made a folder for you in the image uploader. I called it dj's photos-hope you don't mind........it' s the fourth from the top of the list. So you click here on the square image icon. Then in the window that comes up you click on ''browse''. You will see your folder in the list. Click on the folder-you will get a blank page because your folder is empty. Browse and upload your photo. Your photo file name will eventually appear on the page once it has uploaded. Then click on the photo file name and you will go back to the original small window. Wait a moment until your photo appears in the box. You can adjust the photo's size by adjusting the numbers in the upper size box  on the left- 200 to 400 is about right. The lower number automatically adjusts. Then click ok.

Before you do all this make sure your cursor is in the place on the page here where you want you photo to appear.

Last edited by bolivian warmi at Wed, 09/30/2009 - 18:19.

djfiberarts (not verified)

  Oh cool! There it is! Thanks Bolivian!

WeekendWeaver (not verified)

 DJ!  I really like this. : )  I think I have selvedge envy.  Looking great....  Thanks for posting. 

Caroline (not verified)

I have to confess i'm being really slack - I'm still no further forward on my warping up - my excuse is that I should be spending my days spinning, and the real reason? I'm spending sooooooo much time on here having too much fun (is that really possible??)! So I reckon I will be running about a week behind everyone else once i'm up and going.

I am still cheering on from the sidelines and having a good look at what everyone is doing!

bolivian warmi

Wow, this is lovely. Congratulations on being the first up and running! I am collecting straight selvedge secrets. Would you mind sharing yours? Did you tie your selvedge warps on a bit tighter than the others like you read about in that old book?

Laverne

claudia (not verified)

I am relieved to hear that Caroline because I just got the warp on today and want to do a little sampling before I start.  I am not certain what I want to use for weft and how if will look so I put on about 20" extra to try different things out.

We'll be a week behind together.  Nice to have you for company.  Thanks.

Claudia

Loominaria (not verified)

Saori is trying to teach me to let go of the quest for tidy selvedges, but I'm just getting started with Saori, so let's ignore that for a moment.

I find my selvedges pretty much take care of themselves if I keep the warp tension on the entire piece as high as the yarn and my ability to move the heddle can stand. If I'm extra clumsy with the shuttle and bang into the edge warps a lot, I do sometimes add weights to the loose edge warps behind and below the warp beam. It's usually a paperclip hung upon the warp and a kumihimo tama hung with a loop of string upon the paperclip.

I also found Amelia's post on selvedges interesting: askthebellwether.blogspot.com/2008/12/how-do-you-get-good-selvedges.html

Bubbling (multiple arcs) and single arcs to create slack for the weft have never made sense to me as far as getting even slack across the width--use a straight angle to lay in the weft, if you please--but otherwise I found her approach helpful for getting my straight angle straight on the side where the weft is entering and wants to curve, without using my fingers to hold the edge. I'm not sure it saves me much time, but it does keep my warp-edge-pinching fingers from cramping. <g>

Kurt

bolivian warmi

I tend to be a ''bubbler''. -nice to have a name for that.........I call it ''making litle rainbows''. Shall give the straight angle a go. Thanks kurt!

Laverne

WeekendWeaver (not verified)

I'm not sure there's a schedule here (at least not one I've set).  Should I make one, so we all can feel behind? ; ) I must confess that the inches I've woven are probably not going to be part of the project. I'm changing weft from a silk, wool, cashmere blend (soft and slick) to a hairier and slightly thicker sock wool (heather gray).

I've a question: is anyone experimenting with beat. I've tried a very light beat, but really like what DJ has accomplished using tighter interlacing.  DJ, how hard are you beating in your weft? Also, what sett are you using?

 

Loominaria (not verified)

 I would be a 'rainbower' for tapestry or other weaving which employs a beater that is less wide than the full weft's path, and the rainbows probably work well with a slick warp and weft. Otherwise, with yarns that interlace with resistance, I think the straight angle is more in keeping with those pesky laws of physics. On the other hand, yarns will relieve any uneven tension, if they have the space and lack of friction to do so, so many weaves will relax and adjust during use and cleaning.

Today I'm trying to weave a washable acrylic/wool blend that has more 'tooth' than some 100% wools I've used. I really need to start bonding with my cotton, hemp, and linen here.

Kurt

claudia (not verified)

Laura,

I would love to see pictures of your sampling.  I think it would help all of us.

At risk of sounding like a broken record, there is a wonderfully helpful piece in the "Help" section here on Weavolution on how to upload photos.  The trick is to click on the icon at the top fo the message box and then click on the third tab labeled "upload" and proceed from there.  Once you get to the 'Upload" tab it is fairly intuitive and your photos stay on your desktop or hard drive after being uploaded.

Hope that helps,

Claudia

djfiberarts (not verified)

Thank you all for your kind words about my little man scarf :) I'm using 7.5 sett (hoping to get more heddles for Christmas:) I'm beating it pretty hard but not killing it. I'm having a little trouble with the left selvedge and am having to give that a little extra beat. I did tighten up the selvedges before I started and it worked on the right side but the left side is loosening up. So what I do when that happens (and this is probably bad, but it works) is I sort of tighten the selvedge with an alligator clip. I'll take a picture of what I mean tonight and put it in my nifty picture folder!

DJ

claudia (not verified)

Just a hint for those with 8/2 and 10/2 yarns, you can use the yarns doubled in each slot and hole.  I have done that before and it works quite well.  I don't have any current pictures but the next project I have planned, uses 8/2 with a 10-dent heddle and I have doubled the totals ends used.

Claudia

djfiberarts (not verified)

I did tie the selvedges a little tighter, but the left one is loosening up. I'll put pics up to show what I do about that.

I do the staight edge thing and then I make a little rainbow (arc). But I kind of let the selvedge sit on my finger tip a bit before I do either and eyeball it a little. Hard to explain. Maybe I can try to take a pic of that too. I know they say you're not supposed to mess around with the selvedges too much, but I was a tapestry weaver first and you always mess with selvedges with tapestry.

DJ

Loominaria (not verified)

 hi, DJ--

I haven't figured out where to go to look at your selvedges.

I believe those who say don't touch the selvedges are mostly trying to increase speed. However, no one can tell how fast something was made when it's done, but they can see your selvedges forever, unless you cover them or cut them off, so I tend to use whatever works to get the edges I want, even if it slows me down a bit. I have to put the shuttle down to beat with the rigid heddle anyway, so what's the big deal if my next step involves one hand holding the weft turn while the other catches the shuttle? Maybe I'd feel differently if I were on the clock and weaving for food and shelter, but weaving now is for my relaxation, and I'll go at my own serene snail's pace with it in order to be happy with what comes off the loom.

Kurt

djfiberarts (not verified)

  This is what I do with loose selvedge. Pull it tighter and hook loose end to the one next to it. Goofy looking, but it works.

 

DJ

WeekendWeaver (not verified)

Sweet and ingenious... 

I wove up quite a bit last night, but it was too dark inside for pictures. I'll be taking a picture when I get home after work.  :) Changing my weft yarn made all the difference.

Also, is anyone up for experimenting with warp floats?  I'm about to add a second stick tonight. Yay!

WeekendWeaver (not verified)

 

Since my five year-old has hidden my camera the picture quality is really bad.  Cell phone cameras can only do so much. The colors are raspberry and charcol.  The beat is pretty light.

djfiberarts (not verified)

I agree. I don't care how fast I go, as long as it looks good. Do you weave tapestry? I think tapestry folks tend to be slower. I like slow...it's relaxing :)

DJ

djfiberarts (not verified)

I love the colors!

DJ

Loominaria (not verified)

 No tapestry yet, but I have a Mirrix Loom waiting for me to make its heddles. Or buy its Texsolv heddles, if I get lazy. Even more lazy. If that's possible.

However...after thinking more about this...I do like needle weaving on small frame peg looms such as Weavette and Hazel Rose. That would also provide a 'slow-weave' foundation.

Kurt

Thumper70 (not verified)

funny you should mention this . . .

 

I'm sitting here this afternoon playing with drafts and one minute I think *aha* I've got it - and the next . . . . no, not so much. sigh.

I'd like to maximise the full potential of pattern making with my handy RH but am only just getting off the ground.

djfiberarts (not verified)

One of my warps broke this morning. That was a little creepy since I've never had that happen before. So that slowed me down a bit. I fixed it ... sort of. This is good though ... I'm learning stuff, yay!

DJ

Caroline (not verified)

I'm finally up and running!

No photos, as the flash got in the way and I have no idea how to sort that out with the camera.

I warped up with a size 10 crochet cotton so I can get a lacy effect when I do the standard 1,2, 1,3 lifts, and want to see what patterns I can make. The third shed is on a continuous string heddle on a shed stick so I can still do individual pick-up when I want to. I'm trying out different size yarns in a contrast colour as weft so I can see what the warp threads do.

Did someone say they had the info for doing a warp float?

djfiberarts (not verified)

I cut the scarf I was working on off the loom this morning. I chose a warp that was just turning out to be too much trouble. I think the fiber might be old or something. I got it in a box of cones from a friend and I have not idea how old it is or where it came from etc. So, I'll just start again. :(

DJ

francorios (not verified)

DJ,

Hang in there! Don't let that warp whup ya!

Have a good day!

Caroline (not verified)

Try saying that fast, hehe!

Erica J

I've decided to join the intermediate WAL! I'm going to get two projects in one! I've been wanting to do a colour gamp since the Hanwoven Gamp issue (Jan 04)! So I'm going to do y colour gamp in huck lace, hopefully producing a night shawl that I can enjoy in the winters. I've ordered 15 colours of Harrisville Shetland to warp in my 10 epi heddle! so I'll be starting behind the rest, but hope to get started before everyone else finshes!

I'm looking forward to perusing all your pictures in the picture gallery!

Cheers,

Erica

djfiberarts (not verified)

warp, whup, warp, whup, warp,....

Well, all is not lost. I turned my little failure into a printer rug

bolivian warmi

''failure''???? Are you kidding me?!! I don't think so.....neither do the teds!

Caroline (not verified)

That sounds great, Erica!  I'm using this to try different textures and colours using different types of yarn and varying the beating from a balanced weave to a weft faced weave. The warp would have been quite sleazy if I hadn't used crochet cotton, and so far I have I've tried a lacy look using the crochet cotton as weft, then a contrasting and slightly thicker weft, then a thick/thin textured weft with a light beat to keep it balanced. I want to try using a supplementary weft at some stage, and will have a look through Key to Weaving for other options to try.

claudia (not verified)

Erica,

I'll be weaving alongside you.  I have the warp on, did a little sample and decided how I wanted the project to look and there it sits.  I have a Spinning and Weaving week event for Weavolution in Lorton VA on Saturday and am a vendor at an Oktoberfest celebration on Sunday with my closest friend.  Then, next weekend it's off to Rhinebeck.  Maybe I'll find 10 minutes next week or during the baseball playoffs next week.  I have a poncho to construct and everything needs prices.  Say goodbye to my evenings this week.

Looking forward to seeing and learning from the rest of the group.

Thanks for doing this Laura.

Claudia

Submitted by Anonymous (not verified) on