WELCOME..........YOU ARE IN THE BACKSTRAP WEAVING GROUP.

Some members told me that they would be free to take part in a beginner project weave-along once their little ones were back at school.
I am thinkng about reviving the beginner weave-along proposal and starting from scratch-from the VERY BEGINNING-with step-by-step photos starting with loom parts,yarn talk and warping.
Also we have had some new members join up since the initial weave-alongs and it would be nice to have a group start this off together.
Here is the link to the original weave-along page.................
www.weavolution.com/node/4610
 
If you think you may be free to join in in a few weeks let me know here or by PM.
Laverne
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------


WE WILL BE DOING THE STRIPE VARIATIONS AS IN THE FIRST WEAVE ALONG AS WELL AS A  NEW PROPOSAL -WARP FLOAT PATTERNS..........

 

          

 

    

Comments

bolivian warmi

I have the same 1974 edition. I see what you mean but again, I have never experienced this problem. I can only guess that this may occur as she is using a frame and can't go adjusting the tension with her body as the weaving progresses???

She picks single warps and in Ecuador I was taught with doubles. You can see the difference in singles and doubles here........

The bottom blue design (between the two greens) is exactly the same as the center one except that for the bottom one I picked single warps and for the middle one I picked pairs.

bolivian warmi

Yes, they do! I am on the third floor, though and do not. Handy place to put the loom bar-that's a new one!!

Laverne

francorios (not verified)

I understand, The difference in tension between the frame and backstrap could definitely be the difference. I will remember that when I make the small toba frame loom for weaving on the commuter train. I may need to use that "short rows" trick.

I like the examples you posted with the green and blue warps and how it affects the pattern weave.

Thank you for answering my question.

Have a good day!

Sharonl (not verified)

Well I've found everything I need to put a loom together. Himself will rip down timber scraps we have to make the swords and beaters and anything else I can think of while he has the tools out this weekend. I managed to find some mercerized cotton at an affordable price that will do for my beginner attempts.

I've had alot of fun hunting everything down.

francorios (not verified)

Thank you jen,

I will definitely test that when I get back to frame loom weaving.

I think that Sarah Swett book "Kids Weaving" is at our public library. I'll search for it next time.

Have a good day!

bolivian warmi

Good to hear Sharon. In the meantime you can absorb the instructions and bits that  have been added to these pages.

Are you still going to use that bit of ebony? 

Sharonl (not verified)

I'd love to use it but I don't think he's going to hand it over, yet. 

I've been printing and putting all the instructions in order so I can refer to it once I start weaving. How is everyone else progressing?

francorios (not verified)

Hi Sharon,

I'm ready. I have stuff from the previous beginner weavealong.

I'm going to be late because I have weaving projects on the rigid heddle and I'll be enabling the beginner RH weavealong.  So I'll be following along on the sidelines.

I'm very interested in trying the warp float pattern technique.

Have a good day!

Franco Rios

Virag (not verified)

Hi Anne, slightly off topic but boy, backstrap loom is sooooo much easier to store when you're packing for an event!  I've been taking two metal, stout tent stakes like you'd use on a Panther Pavilion and attaching my loom to those just in the front of our shade pavilion then body tensioning the loom while sitting down and weaving/watching the fighting.  I'm hoping we can get some weavers together at Pennsic this year to demo this type of weaving:>:>:>  Virag

marywareodc (not verified)

Hi

Can I come in on this please?  A bit late but your Weavezine feature has got me going at last.

You say we can use wool if it's tightly spun?  That's great as all my cotton is really thin.  So 2-ply homespun - something pretty tough, what kind of thickness (in wpi) is good to start with.  I have loads of dyed and undyed fleece plus bits & pieces.

Thanks, Mary

bolivian warmi

Hi Mary,

Great to see you here. Of course you can come in. Using wool as I said is fine-a god tight spin, in fact OVERSPUN so that it really kinks back on itself when at rest. Using wool you are not going to have your sheds opening as easily and cleanly as you saw in the videos. The fibers frm the wool tend to mesh a bit so you may need to help the sheds to open by pushing down on the warps behind the heddles as you lift the heddles. When you open the shed stick shed you may find that you need to get your hand into the shed and lift the warps to help them pass down through the heddles.

WPI? My demo yarn is 13wpi and I usually use around 35wpi so something between-sorry that this is vague. Remember that this si warp faced so you will end up with quite a firm piece pf fabric so don't use anything too thick. I used the 13wpi to make the backstarp in the article and it was good for straps and the shoulder bag, key fobs but way too thick for bookmarks.

bolivian warmi

INSTRUCTIONS FOR THE WARP FLOAT PATTERNING by Laverne Waddington

The instructions are for triangle designs as shown above woven with BLACK warp floats on a background of black and white horizontal bars.

Here is the chart for this triangle.

 

Weave several rows forming your horizontal bars to start.

Finish with a row of black warps.

    

You have just opened up the shed with all the black pattern warps and passed the weft.

Now you are ready to start picking the black warps for your pattern. You need to pick THREE PAIRS OF BLACK WARPS to form the base of your triangle. Counting from the RIGHT you need to keep the first, third and fifth pairs of black warps and drop all the other blacks.

I have separated the first pair of black warps from the second . The first pair is on my right middle finger. I am going to KEEP that pair and DROP the second pair that is on my left fingers.

I will continue...KEEPING the THIRD pair, DROPPING the fourth pair and KEEPING the FIFTH pair.

All the rest of the black pattern warps and the borders are then dropped.

Here are the three pairs (first, third and fifth). The sword is placed under these.

Now I am up to my next row of ALL WHITE pattern warps. What I need to do is ADD these three pairs of black warps to the whites.

CONTINUED BELOW...............................

PLEASE DO NOT ''REPLY'' TO THIS POST OR I WILL LOSE THE ''EDIT'' OPTION-THANKS!

bolivian warmi

WARP FLOAT PATTERNING INSTRUCTIONS PART TWO..............

We have just picked up the three pairs of black pattern warps and are now ready to add these to the whites.

Leaving the sword under the three black pairs, open the shed with all the whites .

                                                                             

Place your index finger in this shed.                                       We now need to ADD the three black pairs to all the whites. To do

                                                                                                        this, tilt the sword whie leaving the index finger in the white shed.

                                                                                                        Slide the rest of the fingers of the left hand into the NEW shed

                                                                                                        below. Now you can remove the sword and place it into this

                                                                                                        NEW shed.

 CONTINUED BELOW................................

                                                                                                         

 

 

bolivian warmi

WARP FLOAT PATTERNING INSTRUCTIONS PART THREE..........

Now you can pass your weft through this NEW shed comprising all the whites and the three pairs of black pattern warps.

                                     

Passing the weft                                                                          Now you can open the shed with all the black warps and

                                                                                                         pass your weft.

This chart shows what we have just done. We have just completed row 3.

Now you will pick the black pattern pairs for the second part of the triangle. These two black pairs are located BETWEEN the three pairs that were picked for the triangle base.  Proceed  with the instructions as above.

Some pattern charts.........having an odd numbered amount of pairs will allow you to have designs centered on the warp.

I have uploaded two videos to my Flikr page showing the first steps for this float patterning technique. You can see it here......

www.flickr.com/photos/39560980@N05/sets/72157622448219980/.

Laverne

PLEASE DO NOT POST ''REPLIES'' TO THESE POSTS OR I WILL LOSE THE ''EDIT'' OPTION-THANKS. ASK QUESTIONS USING THE ''POST NEW REPLY'' OPTION BOX.

                        

marywareodc (not verified)

Ok - day 1 and I have a little stripey bookmark (with a couple of blips).  Thanks for the advice about wool.  Think I'll leave it until I'm more practiced - I don't fancy wrestling with sticky sheds yet!  But I found some beautiful embroidery silk for small items (only 8 yds per skein).

One question - is there a way of finishing tidily if I want to make more than one item on one warp?  I can space them with cardboard but I guess you get a fringe at both ends?

bolivian warmi

Good for you Mary! I am amazed at how quickly you got this going. When I do bookmarks, I ususlly wind a short warp and do the smooth start that I show in the artilcle. I weave one bookmark and then turn the warp around, do the smooth start at the other end and weave another bookmark. Then I cut the warp between the two and braid. I weave a bookmark long enough to fit between the pages of a novel and the braids hang out at the top of the book. I seal the ends of the braids with white glue and cut them-this is less bulky than having knots in the ends.

If you end up with fringe on both ends of your bookmark, I think Syne Mitchell showed a way to stitch the ends when she did her rigid heddle bookmarks-I think she did a video for it too. It was the article that came out just before mine.

Let us know how you go with that.

Hope you had fun with this.

Laverne

Anne Crowley (not verified)

Traveling made easy-

I am so looking forward to having my loom up and going, going to events!  I hadn't thought of using stakes for an anchor, I was thinking of using my front tent pole and sitting in front to work.  I WISH I was going to Pennsic this year... it is going to be a stretch if I try for Estrella.  Being a caregiver it is hard to go far for events... but having a roll up loom will make a huge difference!

Thanks for the idea! And I want to see the purist types say that backstrap couldn't be period, heehee

Anne Crowley (not verified)

I'm getting there!

Ok, I got all the pieces together and have realized that clean cotton cords are best to start with.  Below is a picture of all the pieces for the final loom.  I kept getting distracted so I also included a rigid heddle that I made from Popsicle sticks and a couple of shuttle/beaters that I use for inkle.  The whole shebang is sitting on the backstrap I put together from scrap weaves I had laying around.

The second picture is the tiny (cute) loom I made from chopsticks.  That one is weaving up well and is the prototype for what I will do next.

Question?  I usually don't have a firm place to anchor lik you do Laverne, so I am playing with a small weight at the top of the loom to stop the flipping twist I get up there.  It just hangs below the top stick in a simple 'Y' yoke to steady. Am I doing something wierd? Or is there a better way to keep the loom parts all facing me and not the floor or wall?

Thank you so much for all the wonderful work you are putting into this!

Virag (not verified)

Yeppers, I know the type.  They don't know as much as they think they know:>.  My persona is Steppe Nomad so I'm covered but if  you have to justify later period then the era when the Conquistadors attacked the New World and brought back stuff would be an interesting point of research.  Eric Broudy's Book of Looms or Book of the Loom covers the use of ground looms and backstrap looms very, very well.

bolivian warmi

Hi Jen,

Could we see a picture of your pvc warping board and have some details? Good warping set ups are hard things to improvise and I would love to see what you made.

Laverne

Sharonl (not verified)

Oh that's an excellent point. I can use that point of reference myself. Problem solved!

bolivian warmi

Thanks for posting these Anne! That loom is so cute and look at the wonderful band you have made on it. Love red and blak together.How much did it cost you to put that together? I think you broke all records with this one!!!

The flippity floppity loom..............maybe it's all just a little too lightweight to stay stable. I personally don't like this kind of tie up but the ladies in Guatemala use this way all the time and no flippity flop. Maybe having the ties further apart on the sticks-as close to the ends as possible and with the warp well centered on the sticks-will help. I would secure those ties with tape so they don't go sliding in to the center as they tend to do. The Guatemalan ladies have notches on their sticks into which the tie up cords sit.

What is that that you are using for a backstrap?Looks ideal. NIce job on the rigid heddle too.

Congratulations!

 

Anne Crowley (not verified)

Good point on the tape or notches, I find when I look away the weave follows me and slides (more intersting cussing getting it all back in line:) ).  The black and red color choice is because my historical group chose those colors for signature colors and I have lots of it laying around. (I love it too)

Cost on the little loom? Basically I made it from scraps around the house, chopsticks, scrap threads and a shuttle that I made from scrap wood for my inkle loom... the only 'cost' in it is the cord I am weaving with.

The large loom was about $5 for the large dowels, $4 for the wood to make the beater and shuttle.  A bit of woodworking effort with a sander made the red oak trim pieces into the beater and shuttle. Sanding and a bit of Danish Oil on the dowels and ingenuity for the rigging.  Eventually all the main cords will be made from my Kumihimo as I gather them.

The backstrap is a scrap leftover from a dress I made for my historical events with scraps of weave 'quilted' onto it for body and looks.  I sets right on my hips like it was painted there.

If I wasn't doing an event this weekend I would be hitched into the loom and going happily crazy.  All in all, I went the fancy route for about $10.  I can see where people could find a nice branch or two and weave... makes real sense. 

jenadina (not verified)

Here you go, Laverne :) The plans for my warping board are from the March/April 2008 issue of Handwoven Magazine.

Here it is broken down to save space:

taken apart:

and put together:

 

Sorry the pics are so big...does anyone know what pixel size I should put in there?

bolivian warmi

First pixel size-I usually put 200-400 in the top box and let it work out the other number.

Guess what I am making this weekend? I have three warping boards which i have to set up end to end when I want to do a  long warp and then crawl up and down on my hands and knees to warp!! Luckily I don't do long warps very often! I have tried all kinds of side by side arrangements but they don't end up stable enough. I too put a lot of tension on the warp when I wind it. I love the fact that you can dismantle it-that is what has stopped me from having a ''real'' one built-no room to store it-my apartment is TINY.

thank you so much for posting this, Jen. I hope the others see it.

Laverne

 

LoomMonkey (not verified)

Hey, I think I've found the group ;)

 

This is me, signing up for the weave-along!

bolivian warmi

Great! Adding you to the list.............Let us know if you need help with anything.

Laverne

Sharonl (not verified)

I'm going to have to put this project on hold for a while. I've been asked to spin 1kg of alpaca by my spinning group. Its a paid job so I need to get it done first. I'll keep printing off instructions and get to the loom as soon as I'm done.

Sharon

bolivian warmi

Paid for spinning-how nice. See you when you get back then.

jenadina (not verified)

You're welcome. Make sure you use pvc glue everywhere except the corners and the middle brace, or the pieces will turn on you!

kelleymcdonald (not verified)

I would like to join the Beginner WAL but am such the beginner that I do not even have my loom assembled yet! I am going to gather my supplies this week and see if I can be up and running very soon! It is just good to know that you all are here and that I do not have to learn this all on my own!  My goal is to be able to weave my husband a stole (about 5 inches wide x 60 inches long) by June. It will be the 20th anniversary of his ordination. Thanks for directing me here from Ravelry....

Kelley

bolivian warmi

Hi Kelley! So glad you decided to come over and join us. These pages started off as WALs and are now just called ''tutorials''as there are new people joining in all the time. Don't worry-you are not on your own-there are several others getting their loom parts together now and others on their first projects. I hope you got to take a look at the WeaveZine article and please don't hesitate to ask if you have any questions. I like the sound of your project and you have plenty of time to practice and get acquainted with your loom before you plan and begin to weave the stole................Welcome!!

PS........If you do have any questions or comments, please post them on this page.......www.weavolution.com/node/5756

(This page here is quite congested)

Laverne

DianneStucki (not verified)

I think the idea of a backstrappers get together at Pennsic is FANTASTIC.  I will most likely have all three of my boys with me, so I will be spending most of my time in camp, but I'll volunteer right now to host a get together sometime during War Week.

 

bolivian warmi

Is Pennsic an annual event? Virag told and showed me a lot about the recent event. It looks wonderful!

DianneStucki (not verified)

Yes, Pennsic is the last week of July and the first week of August every year.  I've gone for the last six years, and every year just gets better.  http://www.pennsicwar.org is the official website.

There is a particular spot, where you cross the street from one Merchant Area to the other, with a grassy verge where people sit and play instruments, sing, or do portable crafts. I may set up for a little while there next year. It's a fantastic people-watching spot, and good place for people to see backstrapping in action!


Of course, now I'm thinking of making a tunic from the very beginning--dye the wool (I love cochineal), spin the thread, weave the fabric, and sew the dress! Is it possible to do 22" widths on a backstrap?

bolivian warmi

Sure you can do 22'' width. Take a look at the poncho weaver and carry cloth weaver below.

Oh that all sounds like great fun-the making of your tunic and the backstrapping at Pennsic with the musicians all around.........wonderful!

And you have given yourself a lot of time to get this going. And lucky us!-we will be able to watch the whole process. :-)

Laverne

 

 

DianneStucki (not verified)

Hi Terry

 

In one of my (so far) abortive efforts at backstrapping, I screwed a hook into the front frame of a cabinet in my sewing room, and I too had the problem of the loom constantly tipping. My solution was to screw in a second hook, so the cord is stretched out over the two. It seems to be more stable that way.

 

Dianne

Submitted by bolivian warmi on