I am in the process of purchasing a floor loom; however, I am not sure which would be the most economic and easiest to operate.  I was looking at table looms as well and was about to purchase the Schacht flip loom.

I want to be able to not only do scarves, placemats; I want to be able to do rugs, blankets, etc. 

Which loom would be the best to use? I have experienced weaving on my regular frame loom which is going great for tapestry work.

 

Thanks.

Comments

laurafry

If you want to do rugs, a floor loom would be better than a table/lever loom.  Something fairly sturdy because rugs take a pretty heavy beat to seat the weft into place.  I have a Leclerc Fanny on which I have done everything from rugs, both warp and weft faced, all the way through to very fine silk scarves, and everything in between.  Some people prefer a macomber, others a Mighty Wolf (Schacht).  They all have advantages and many people like one over the other.  I would try to find a second hand loom, try it and see how you like it.  Then try different makes and models.  It is sort of like buying a car.  You won't necessarily have the same vehicle for all stages of your life.  You might have different looms for doing different things.  Sometimes more than one at a time.  :)

 

sandra.eberhar…

If you want to do rugs, a counterbalance or countermarche will work better than a Jack loom.  If you want the cheapest loom with patterning capabilities, a four shaft counterbalance would work.

Joanne Hall

If you don't know of a guild in your area, check the website of the Handweavers Guild of America.  They list the weaving guilds.

Guild members are a great source of information and they can also help you to select a loom.

Joanne

coffeebrown52

Thank you Joanne, that information is very helpful.  I have googled them in my area and see that we have a couple here locally.

coffeebrown52

Well, I did it!  I ordered the Ashley Rigid Heddle Loom 32" yesterday and can't wait to use it for the first time.  Not sure how long it will take the postman to deliver, but I will be nailbiting til it arrives 

Updates to follow............

Gone

I though at first you said you'd be NÃ¥lbinding til t arrives.

I was told early on ".... weavers RARELY have only one loom." Just some food for thought. Welcome to the rabbit hole!

  Rugs are a blast!  They weave up fast and produce a functional product without a too much fussing and yield a great deal of learning as well. But you need a sturdy loom. Above all have fun!

coffeebrown52

Hahaha, yes I am nail biting because its going to be a new experience for me; however, I am dwaddling with my tapestry weaving on a kids loom by Melissa & Doug (that's how newbie I am, lol).

I will see how I like this new RH before I invest in a floor loom, preferrably a small floor loom like the mighty wolf.

coffeebrown52

I  got my loom yesterday after work and almost had a disaster warp.  My first weave 

coffeebrown52

Well,  I  completed my first sample and fired up for more.  I  love this craft already. 

Sue in VT

And what a nice, colorful couch throw you've woven.  Soon you'll be eyeing your living spaces to plan your studio space.  Happly weaving!

Sue in VT

And what a nice, colorful couch throw you've woven.  Soon you'll be eyeing your living spaces to plan your studio space.  Happly weaving!

Sue in VT

Great first project, and nicely woven.  Happy journey!

coffeebrown52

Thank you Sue, I  am actually converting my smaller bedroom into my weaving paradise.   I  want the floor loom also.  This RH is fantastic and I  will  weave,weave until I save enough for the floor loom.  Not sure which one to buy yet.  Any suggestions?

Queezle

There are some great deals on used looms if you keep your eyes open.  Both my looms were purchased used.  You can watch the advertisements, research the looms for sale, and develop the understanding of which features interest you (size, number of sheds, etc).  Its an interesting journey that teaches you about looms, weaving history, and weaving itself. 

 

Have fun.

coffeebrown52

I am working on my second sample and I know that my weave going across is a little off.  One side is up and one side side is down.  The weave is not beating straight across.  

Do I need to rework this particular section and retry it or just complete the sample and let it go?

coffeebrown52

It was in the tension.  Going to learn to create a shawl.  Wish me luck

coffeebrown52

I'm really interested in a career change.  I want to do weaving full time and cannot find any information on this.  Is there any job opportunities for weavers other than self-entrepreneur?

 

 

rughooker1

The treddleing on my pattern calls for raising heddles 1&2. I can't figure out how to do it!! Can someone explain how to do it?

chasfmill

My wife and I are interested in the very beginnings of weaving.  She is particulary interested in rag rugs (to start) made with a very simple loom that we saw at a living history farm near us.  The docent told us the name of the loom, and I found some online.  But now I've forgotten the name, and for the life of me, I can't find it online now.  As I remember it, the loom was quite simple with a board, like a 1x4 or 2x4 and a few nails on one end.  I know it is a primitive way of making rag rugs for you people on this forum, but does anyone know the name of the loom we saw?  Later on, I hope to begin weaving with a larger loom, but this is what my wife wants to try for now.  Thanks.

Bonnie Inouye (not verified)

If you have a table loom, move the levers for shafts 1 and 2.

If you have a floor loom, how many treadles do you have? A 4-shaft floor loom with 4 treadles has "direct tie-up". Then you use both of your feet when you want to raise shafts 1 and 2. There are different ways to arrange the tie-up to make certain treadling sequences easier with two feet.

If you have 6 treadles, then tie one of the treadles to lift shafts 1 and 2.

Have you taken a weaving class yet? Do you have a book for beginning weaving? There's a class on Craftsy that many people like for beginning 4-shaft weaving. The heddles are generally made of metal or string or Texsolv (like nylon, white) and your warp yarn goes through the eye of a heddle. Many heddles are found on each shaft.

Bonnie (I taught beginning 4-shaft weaving for about 8 years in the Craft Center at the University of Maryland- but now we live in western Colorado)

Gone

It sounds like you're talking about a TWINING loom?  I made one with 2x4's and wooden dowels. Lap jointed the ends. I made 8 rugs on it already. It was my first foray into weaving and down the rabbit hole I fell!  Twining is easy and produces a very thick rug (3 layers) It's more accurately called 'oblique braiding'. As you progress you learn to make different patterns too. The biggest investment is time. You have to cut the material into strips. The choice of material is a factor also. Different material weaves differently (same with a floor loom) There are a few vids on YT which explain the technique pretty well. There's a knotting technique too to connect the strips. Very easy to learn. I put mine on a stand so it could be flipped to work both ends toward the middle. The metal bars are important to keep the sides from pulling in while you weave. You pull them out when you're done.  Dia. isn't important - just sturdy. 1/4 in. is fine.

chasfmill

Thanks for the reply.  No, I found twining looms online, but that loom is not what I'm looking for (I would like to try one, though).  The loom I'm looking for is much more primitive and is used to twist material for making rag rugs, I think.  This is a poor photo, but maybe someone can identify this type of lap loom.

joy4wayne

I bought a Structo Artcraft 750 loom, bought from a private person when I bought it we had to take it apart so that it would fit into my car.  I have been able to put it together but not sure where the warp tensioner goes and where the raddle and lease sticks go.  can anyone help me?

sally orgren

Tom,

I inherited the same loom as in your photo from my grandmother, who passed away in the 1970's when she was in her early 90's. My aunt told me her mother saw this loom at the Chicago World Fair (1933), and had my grandfather (who was a pattern maker) make her one. She lived in Wisconsin, so I don't know if this was a regional thing or national.

Also, I don't know if this loom was favored by Dutch immigrants, or named for the thriftiness of using rags and scrap fabrics. I made an oval wool rug with this loom.

Gone

Got me!  Looks like braiding. But I've never seen a machine for it.

Submitted by coffeebrown52 on