OK, silly question from a newcomer...just set up my first backstrap and made my heddles all nice, BUT...no matter what I did, the result was plainweave.  Weft and warp equally evident. 

Then the cat attacked my weft shot and hey presto--I had something much closer to warp faced!  Pulled it all tighter together and confirmed my feeling...

Here's the question:  For a warp-faced item, is it true that the warps are much closer together than in a plain-weave one?

And if I like the plainweave look (I do), I need some ideas on how to best keep my picks level--my middle is higher than my selvages no matter how hard I beat them in.

Bewildered....any help appreciated!

Comments

bolivian warmi

Warp-faced is just that...you have to have the warps close enough together to completely cover the weft. This is something you arrange once the warp is on the loom and you are passing the first wefts. Push all the warps together pull the weft through enough to hold them in place and beat  the weft in firmly.

I find achieving a balanced weave on the backstrap loom quite difficult. The warps will always want to wander over either in the center or along the edges. I have tried twining between the warps at the start as well as using mutliple cross sticks to help spread the warps. I made a log cabin piece  and a mini pinwheel that way.

However, by far the easiest way that I have found is to use a rigid heddle on the loom.

            

The log cabin with twining and                      Using a rigid heddle.

sticks to spread the warps.

There is a thread here on balanced weaves on the backstrap loom.

tobytottle (not verified)

This is just what I struggled with in the beginning! My first few attempts at warp faced all came out as plain weave, and it wasn't until I really pulled those warps in tightly just after I'd passed the weft that it started to look right! Thanks to Laverne and Co. here on the Backstrap Group I figured it out! I think the plain weave can look great, but I also think the scope for working designs and patterns into your work is greatly improved by perservering with warp-faced, in my opinion! :)

Good luck and enjoy it!

Toby.

Submitted by Anonymous (not verified) on