For some reason, the piece I was weaving began going uphill, drastically. I used a cardboard strip in the beginning 7 made

 

 a header too. At first the weaving was going straight. THen it began going uphill. Any ideas what happened & how I can prevent it again?

Cathy S/Willowwind

Comments

feltedbag (not verified)

Is your warp tension consistent all the way across?  I always close my eyes when I checked the warp tension so that my judgement is based just on how it feels.

claudia (not verified)

Hi Cathy,

Can you take a couple pictures so we can see what's going on?

I believe feltedbag may have it right.  When this begins to happen, you may need to check your warp and see that tension is the same on all threads.  If not, use S hooks or something to add weight at the back of the loom on the threads that are loose.  How did you attach the warp to the front apron rod?  is it lashed on or tied?  You may want to unroll your web and check to be certain something hasn't come untied.

Claudia

lkautio (not verified)

Sometimes, if you have a foldable loom, one side of the loom has partially folded.  Also, check if a thread has fallen in somewhere (heddles or behind them) and is raising the tension in one section.

Laurie Autio

jornada (not verified)

I have a questions about the sentence below....................lashed on or tied.  Could someone explain the lashed on part?

 

Thanks,

Teresa

 

 

How did you attach the warp to the front apron rod?  is it lashed on or tied?

wilowind (not verified)

 

 

The warps were tied & I'll be sure, from now on, to make sure the tension is consistent across the warp. I thought it was. Aparently it changed. I attempted to fix the problem by weaving in the part that was going uphill to make it even with the rest. It didn't look so hot, so that's one I'll keep. Thanks for the suggestions.

Willowwind

claudia (not verified)

Peggy Osterkamp has a section of Tips on her website and here is one re: lacing or lashing on.   

I usually warp the rh loom from front to back by threading the threads through the rh before cutting them and just looping them over the back apron rod that is attached to the back beam.  Then, as you would with warping back to front, I beam the warp onto the back beam using weights or something heavy to provide tension.  Then, I cut the front threads and rethread through the holes of the rh and tie into bundles of 1/2 to 1" and lash to the front beam.  

Hope that helps,
Claudia

jornada (not verified)

thanks Claudia for the reply.  I've woven several scarves on my RH and was originally taught a different method of warping the  loom.  What you've described (and I've seen on several videos) seems more logical than what I was originally taught.  So, I'll give that a try on my next project.

Thanks again!

Teresa

steve104c (not verified)

Teresa, Lashing on is tying twine or string( this is the lash) to the rod from the beam and then tying the warps onto these strings, actually tie the groups of 8 warps with a simple overhand knot then tie a slip knot in the lash and put the slip knot over the warp thread knot and pull tight ,then tie the lashes to the beam rod. This will help to tension the warp easier when tying to your beam and help to lessen warp waste. Tie only groups of 8 warp threads to each lash. Go to the "LeClerc Looms" web site and check  the video on loading their sectional beam. It  shows how they connect the warp to lashes............Steve.

steve104c (not verified)

Tersa, I know I 'm just a beginner, but, I had problems with the edges pulling in too. I bought a temple(stretcher). I don't seem to have the pulling in problem any more.  I am making rag rugs and us the metal temple. If your are weaving yarns you will need the wooden temple. They have a less aggressive angle on the teeth and are recommended for lighter fabrics. Ck any of the weaving stores on line and you can find the size you'll need. They come in several different adjustable widths..................Steve

steve104c (not verified)

Teresa, here are pics. of how I tied warp onto front beam with lashes and pics of my temple (stretcher)......Steve

claudia (not verified)

Hi Steve,

That is a very different interpretation of lashing on. Is that how they show it on the Leclerc site?

I was taught by Tom Knisely at the Mannings weaving school in York, Pa.  Using a slippery string or cord like polyester cord tied at one end to the apron rod.  You then tie about 1" of warp with an overhand knot and alternate going through the center of the knot and over the apron rod.  I'll look for a video and edit this when I find one.

Claudia 

Caroline (not verified)

Steve, If you have the Deborah Chandler book, "Learning to Weave" she describes the method of lashing on that Claudia suggests - its quick and easy to do, and ensures that any slack in your warp is taken up as far as its possible to do, so tension is evened out.  I would not lash on any other way now.

lkautio (not verified)

Looks like Steve is using the Nyquist method?  It is reasonably fast and easy to get good tension, and a lot of people like using it.  I use the single lashing cord myself as it is faster and easy, but I am not sure that the single cord results in any better tension.

Laurie Autio

steve104c (not verified)

lkautio, thank you the info. on the method I'm using. I do have the" Learning to Weave by Doborah Chandler". I did find the section on lashing a warp. I was wrong when said my method was lashing. Thanks again for the correction. I was told about my method when I took a weaving class. My instructor did not tell me the name but she said it would make it easier to tension and waste less warp....................................Steve.

Submitted by Anonymous (not verified) on