I need to wind a 3.5 yard warp while teaching a class at a local rec program.  I do not want to bring my warping board along for several reasons but mostly because it is firmly nailed on the basement wall.  I tried setting it up for direct warping and found myself out of space in the room I am using.

Any suggestions?  The warp is 186 ends, 3.5 yds long.  I do not have a table long enough to put 3-4 pegs on it and wind the warp. 

Claudia

Comments

Michael White

Arms work and that can be fun to.

jordanj (not verified)

 Perhaps you could use one peg on a table to wind a demo warp, but wind the "real" warp at home, prior to class? 

Another thought is a collapsible horizontal warping reel that fits on a table..

sequel (not verified)

Oh what fun! 

We our program first started up we had no warping board, so we turned chairs and tables over, warped around the legs, or just about anything.  It gave the students a chance to see that they could get by on the cheap until they too could get a "real" weaving set-up.  My favorite cheapie was a three tier folding magazine stand that had six legs...

Karren K. Brito

How about the hallway?  or outside?  Sticks in the ground have worked for eons.

debmcclintock

 If you have somewhere you can drive nails 4 nails will do it for the cross and wrap around.  I did this at a mill when we were under construction and I needed a quick warp to test a loom set up.

My best photo is a weaver in Laos by the road that had driven bamboo sticks in the ground and was winding a warp for 10 skirt panels by the road.  Had her yarn on a carrying rack and was walking up and down the road winding the warp chain.  Priceless!

RocketScientist

For years before I heard of a warping board, I wound warp the length I needed for scarves using a 2x4 and some long long nails. One at one end and 2 at the other. It worked very well. Since yours is longer than 2x4's come, you may need to use some trees or a narrow platform made of several 2x4's tacked on top of the platform made of 2x4's. Another would be to do the same only don't use the platform and just peg the 2x4's into ground.

Submitted by Anonymous (not verified) on