I just got my Harp loom and I feel like an absolute idiot because everything says that it's easy to assemble, but I can't figure it out.

I can't figure out which side is the right side in order to attach the pawls, b/c I don't know what is the front and what is the back.

The directions say the hinge swings on the back section of the loom, but according to the photos the front support bar is farther away from the ends of the harp than the support beam is from the ends of the harp at the back.  If both of these things are true, then my loom was put together improperly.

I don't want to attach the pawls until I figure out which side they go on.

Can anyone help me figure this out?

Comments

Erica J

I bought both mine second hand, so they came assembled already. However mine seem to be identical front and back without the heddle in. There are holes for the heddle blocks in the font and back, so perhaps it's a matter of moving the heddle blocks rather than the pawls? This may or may not actually help, if it does great, if not you can always wait for someone who's actually assembled theirs.

Good luck,

Erica

amandolin (not verified)

Thanks for that info, but I figured it out.  The drawing I was going by is just a little wonky b/c of how they have it in perspective.

I had to talk to the people at both New Voyager and the Woolery, but I got it now, thank goodness.

 

But... I wonder if you're right in that you could just switch the heddle blocks if the pawls were positioned on the wrong side?

Erica J

I looked into putting 3 heddle blocks on, because there are two sets on each side, and noticed that it's possible, but the "back set" would be backwards. That's what made wonder if it really matters.

Glad you got it sorted!

Submitted by Anonymous (not verified) on