Our study group was working on profile drafts and someone handed out a nice sheet showing a profile draft and the various threadings for each.  I chose to make placemats using 3/2 perle cotton in summer & winter.  The draft was written with 2 blocks  A=1.3.2.3 and B=1,4,3,4.  I did a sample which looks okay but the floats were really long so I started another sample and looked more carefully at the handout and saw written under the threading draft that block A=1,3,2,3 and B=1,4,2,4.  The draft was wrong and the written pattern is correct for summer & winter. 

So, I'd like to continue with overshot and not have to change the threading on the loom.  I have it set up now exactly as you see below.  Can I still continue to weave it as an overshot pattern alternating tabby with each pattern pick?  I ended up with really long floats and at times was weaving the same pick twice when alternating tabby (1-2, 3-4) with the threading below. I am treadling using tromp as writ.

Claudia

Comments

zinniz (not verified)

 You don't have a true tabby with this threading, but if you want to keep at it without rethreading, you might have more stability with a 1-3, 2-4 tabby. Using 1-2, 3-4 for tabby could cause a lot of problems in your block B where you've threaded 1-4-3-4.

 

claudia (not verified)

That appears to be part of the problem.  I thought I understood more about overshot than I seem to so it's back to the books for now.  I am going through Helene Bress' chapter on overshot in The Weaving Book and learning a good deal there.  I believe I have made several mistakes and am now considering changing the goal of this project from placemats to a table runner.  Not sure if that will improve things but I could finish a 48" table runner and cut it off and rethread the loom for at least 2 place mats. 

Just trying to think outside the box.  I'm open to any and all suggestions.

Claudia

lkautio (not verified)

Claudia, if you treat this as a multiple tabby weave (like M's and O's or some of the Bateman weaves) rather than overshot I think you can come closer to the original S+W idea.  An easy way to start is to think on opposites.  That is, follow each shed with its opposite.  On 4 shafts there are 7 pairs of opposite sheds (in parenthesis I put the result on your threading, with A and B blocks):

12 vs 34 (plain weave in A, pattern in B)

23 vs 14 (plain weave in B, pattern in A)

13 vs 24 (pattern in A, pattern in B on alternating sheds)

1 vs 234 (pattern in A, pattern in B on same shed)

2 vs 134 (pattern in A, long floats in B)

3 vs 124 (plain weave in A, pattern in B)

4 vs 123 (plain weave in B, long floats in A)

Five of these produce good patterns without long floats (3 thread maximum). You can combine them with one or two shuttles (different colors and/or different weights of yarn) to get different  interesting block effects.   I wasn't able to add a draft to this note, but you can draw it down easily, Try alternating between one pair for 8 threads, then changing to the next opposite pair.  There are a number of other treadlings (including various twills) which will work.  Just stay away from lifting 2 or 4 alone or 1+3+4 or 1+2+3 together.  This looks fun, so I am going to thread up a loom and see what I can make it do.  Happy weaving,

Laurie Autio

claudia (not verified)

Thank you Laurie, that is very helpful.  I have been reading Helen Bress and Weaver's Overshot is Hot and learning more about overshot.  It's a very versatile and complex structure.  Lots to learn.

Hopefully I'll get to the loom today now that I am armed with your suggestions and sample, sample, sample.

Thanks again.
Claudia

Submitted by Anonymous (not verified) on