I have just acquired a "Harris" 8 shaft table loom and need to replace/add to some of the heddles, which at present are wire.  Should I just supplement the existing wire ones or should I take the opportunity to change then all to Texsolv?

Comments

lkautio (not verified)

It may not work as well with texsolv.  The weight of the wire heddles helps the shedding in some looms. The bars on looms meant for wire heddles are generally at a fixed distance while looms meant for string/texsolv they can be moved closer to help the heddles more.  Wire heddles move easily and quickly on metal bars and settle themselves into position.  I can thread 2-3x as fast on a loom with wire heddles compared to one with texsolv.  Either way, have fun weaving!

Laurie Autio

Joanne Hall

I believe that Harris looms are from the UK. Is that correct?  We are not very familiar with them in the US.  We would need more information about your loom to give you a recommendation.  If your loom has something on the bottom of the shafts to hold them down, like springs or stretchy bands, like the older Glimakra table loom and some American table looms, there should be no problem with using Texsolv heddles.  But, if it is a jack loom, it depends on how heavy the shafts are without them. 

Joanne

Mike (not verified)

Thank you Ikautio and Joanne.  I am a UK member and yes, "Harris" are a UK manufactured loom. The shafts are rigid metal rectangles held together with a nut and bolt at each corner, so heddles are fitted by unscrewing 2 of the corners and then taking off one of the end bars, sliding new heddles on and then replacing the end bar.

Submitted by Anonymous (not verified) on