Hello All!

In attempting Laverne's first backstrap tutorial, I managed to create - erm - something else! I was aiming for the "comb" pattern!

I know the arrangement of warp threads in the cross isn't perfect but I don't think the problem is in the warps, I imagine the problem is that I've ended up with a tabby/plain weave when I really want the warp threads to cover the weft completely. Does anyone know how I've managed to do this?

As you can see in the bottom photo I tried to purposefully draw in the selvedges because I noticed in previous projects that the warp becomes dominant the narrower the band becomes but as you can see below, I'm still getting far too much weft!

The cross:

My Cross

 

The result (!):

 

Any thoughts on how to achieve an effective warp-faced weave? Is it something to do with yarn thickness? Or technique?

Help!!  :)

 

Toby.

Comments

rose Goldielocks (not verified)

You have done nothing really wrong, just not pulled your weft tight enough.

try this....

weave 4 small diameter sticks.(you will remove them later)... toothpicks/Q-tips/skewers/narrow dowel rod/ pencils/  into your warp.

Push the warp as close together as it will go on the sticks, so that no stick is showing. Wiggle the warp a little bit, let the tension relax a bit, then tighten it. This should give you the "natural" width of your band as warp-faced. Take a ruler and measure how wide your band is. or, mark the edges with a pen on on one of your sticks.

Now, pull the sticks out, and weave your weft in, pulling it as tight as you marked down. (if you marked the edges on the stick, it is real easy to lay the stick on the weaving line to see if your marks line up with the selvages of your weaving.)

It will take between 4 and 6 picks for your band to "narrow down and settle in" so it looks nice.

Warp faced weave has nothing to do with yarn thickness, except that when you go too thick it is very hard to achieve, but "too thick" means something as thick as 1/2" diameter clothesline.

The other thing you can try, is to pull the weft as tight as it possibly can go, for 3-4 picks, then don't pull the weft as tight, but let it settle in to the natural width. I have lots of bands with the first 6" that are wide, then narrow, then medium, then woven at the same width all the way though, as I figure out what width looks best. These are bands from  belts, and when I finish the belt, I cut the "bad" end off and throw it in my bag of samples. (I normally warp about 24" longer than I think I need just for this purpose.) I refer to these bands later when I want to figure out "If I want the band to be X inches wide, how many threads do I need for That Pattern?? using THAT yarn ??? 

 

Great to see people trying.. boy oh boy do I wish I had someone to ask questions of when I started weaving, I had to "raccoon" things untill my bands looked like the picture in the book I was using (no nice color pictures, just black and white drawings).

 

Sharon

tobytottle (not verified)

Thank you so much Sharon for such a detailed response! I'm going to try it right now!

Toby.

bolivian warmi

Well Sharon has said it all Toby.

You haven't done anything wrong with your set up. When you start weaving, you need to push your warps close together. The first two weft passes will allow you to play a bit and move things around. At the bottom of your picture at the unwoven part I can see gaps between the warps. Well you shouldn't be able to see that-the warps should be pushed close together so there are not any gaps.

I like to push the warps together on the cross sticks before I put my heddles in and take a measurement-there is good photo of this in the WeaveZine article-that will give you a good idea of how wide your warp faced band will be.

Well okay, you have a nice tabby band. Do you know how many people want to weave a nice balanced weave on their backstraps and can't???-they end up with warp faced. You have ended up in the opposite situation!!

Laverne

tobytottle (not verified)

Thanks for your input too, Laverne, you've both been a BIG HELP!

With your help I finished that piece off and I'm now halfway through another in the comb style, just to make sure I know it! I'm confident about the technique but I'm really struggling with 'sticky' warps at the moment. I haven't made it easy for myself I'll admit - I'm working on a wider band now, so there are more warps to keep an eye on, not to mention the fact that I'm using a synthetic "wool", the very cheap kind! Which is really a bit on the thick side for this I think, and sticks like crazy. I'm also using regular parcel string for my heddles which seem to clog up with fibre as soon as I change the sheds over once or twice!

Am I just making it unnecessarily hard for myself, or is it normal to struggle with sticky warps on EVERY shed change?!

My next logical question is: can anyone recommend a few yarns/fibres that give the least sticky warps, the most attractive final result and the best heddle strings?! (ideally something I could either find here in the UK or buy online!)

Many thanks in advance!

Toby.

bolivian warmi

Hi Toby,

I am so glad that you are getting along. If you use any kind of wool, you really need to respin it before you use it for any warp faced weave on the backstrap loom. That means that you have to spin the yarn in the direction of the original spin and make it firmer. This will swallow up a lot of the fluffiness and make it firm enough to withstand the abrasion of the heddles. When yu are first starting out and trying to get coordinated to open the heddles you tend to drag them around a lot-this is normal and means that the yarn has to take a lot of abuse.

I just respin commercial wool yarns with my drop spindle.

I always recommend that beginners start with a mercerized cotton-something around 12 wraps per inch for a first project. This cotton is nice and smooth and thick enough to weave up a fist project fairly quickly. Do try and get mercerized even if you have to go to something a bit finer. Crochet cotton works well. That's pretty much all I can get here in lowland Bolivia-that and perle cotton and both work really well. I ocassionally spin llama fibre.

Having to deal with sticky warps like you are is miserable!

I use my warp yarn for my heddle string and if you are using mercerized, it will work beautifully. It also ends up being just the right size once you have put in the extra hitch to span the width of your warp. Some people like to use nylon string as it is slippery and won't abrade the warp but I hate it as it won't hold the hitches firmly.

Okay, I hope all this helps!

Laverne

 

 

 

 

 

 

 

Aunt Janet (not verified)

 I just ordered some cotton warp from Laura Fry to try out for backstrap weaving.  I'll let you know how it works.  I think this is going to be a winner.

Aunt Janet

Submitted by Anonymous (not verified) on