Hi All.  It is December 13th and I have 2.5 weeks to fulfill a 2008 new years resolution, to weave something.  I keep buying looms but I keep not weaving anything because I HATE warping a loom.  I promised myself that this year I would get past that.

I am almost there but as usual there is a problem.  I have a Mountain table loam and am concerned that warp is too thick for the beater.  Is that possible?  I am using Lion Brand Homespun to weave a very simple scarf.  Anyone got any ideas?

Comments

nctxweaver (not verified)

I am guessing that the Mountain table loom has a metal reed in it.  You'll need to find out what dent your reed is, that will determine what type of warp/yarn you can use.   The most common sizes are 12 & 15 dent (12 & 15 threads per inch). It will say it on either end of the dents, or you can measure how many spaces there are in an inch. 

Homespun is pretty beefy, it would be best used as weft and get yourself a thinner yarn for warp.  Something in the range of size 10, size 3, size 5 mercerized yarn (or similar in size).   I am talking about commercially available yarns because they are more recognizable for most non-weavers. 

To find out if the yarn will work in your reed, measure your yarn by figuring out the wraps per inch.  You wrap your yarn on a ruler within an inch measure.  Just wrap the yarn side by side over the inch.  Count the wraps inside the inch measurement and divide in half, that tells you what size reed you need (ie.- 6 wraps= 3 dent/10 wraps=5 dent).

One more thing to consider is that commercial knitting yarn is not made with a high twist which is necessary or preferred for a warp yarn, the beater on weaving looms will continuously go through the yarn as you weave and .  beat - so they yarn needs to be able to take that continuous aggitation or it may fall apart. 

I hope this helps, don't let the warping process hold you back.  It was not my favorite part of the weaving process, but I have learned that if I want to weave I must warp my looms to do so.  I still make threading mistakes, but my reward is the actual weaving.  

 

Elaine in TX

claudia (not verified)

Hi Joan,

If you are anxious to weave but don't want to work out the warp you can buy a kit with a pre-wound warp. Several of our advertisers, Laura Fry, Glimakra (Joanne Hall), Lotsaknots, to just name a few, sell kits with pre-wound warps. Many others sell kits with the yarn and directions for exactly what to wind and how to weave the chosen item.

Our advertisers are all here and each name is a clickable link to their website or click on the ads that rotate on every page of the website.

Claudia, Weavolution co-founder

Michael White

Good morning U'll. Claudia you need to move this to the weaveing forum sections. JOAN you can see scarves woven with lion Brand Homespun and other knitting and novelty yarns here www.handweaver.us and a discussion on using knitting and novelity yarns at http://www.weavolution.com/node/6964?#new and other pagers.

The scarves woven with Lion Brand Homespun in the warp were woven with a 6 dent reed. Because of the nature of knitting yarn you have to add other yarns in the warp to give you some strength. You could run a search to see what other pages have information on knitting/novelty yarns

We would love to see your finish scarf when it is done. You can also find talks about wet finishing K/N yarns here somewhere.

Michael

Submitted by Anonymous (not verified) on