There are several posts in the weaving forum about rag rugs so I decided it was time to start a Rag Rug weaving group on Weavolution.

I have woven a couple rag rugs and want to get back to it when the holidays are over. I would love to hear from others about the rugs they have woven, the materials used and how they prepared them. I have 2 overstuffed garbage bags in my studio filled with rags looking for a rug. I am stumped about preparing them for weaving.

I have woven rugs with fabric and rags and I also made a purse using men's ties. I love the purse and would love to do more projects using the old ties. Weaving with them really takes a lot of ties for just a short amount of fabric. Anyone else try ties?

Here is the purse:

 

Comments

claudia (not verified)

Read about Mary Ann Small in the News today. She's a rag rug weaver on the coast of Maine whom I visited last week when we were there on vacation. Check out her website: maineislandragrugs.com/default.asp

Claudia

djfiberarts (not verified)

The purse is cool. You made that with men's ties?

The Maine rugs are gorgeous. I wonder what she uses for warp mostly. The warp in the first picture on the home page looks thick, almost like Lion Cotton Ease, but I doubt that's what it is.

DJ

suzyhok (not verified)

 I think I visited Mary Ann about 10-12 years ago when we stayed in Rockport after taking our daughter to school at the University of Maine in Orono.  I remember being very impressed by her set up and dreaming that I wanted to be just like her when I grow up.  

As for technique.... I cut my strips so that they would be about the diameter of one of those thick kindergarten pencils when rolled up tight.  It usually was about an inch (more if thinner fabric and less if thicker.)  I found some really heavy duty carpet scissors and folded the wool fabric and cut through about 4-6 layers at a time making long strips.  Like Mary Ann (I see in the photo) I did not bother to wind the strips on a shuttle -- I just laid them in.  I cut the end of each strip in a sharp angle so that  you could not notice the joint.  Bevel one to the left and the other to the right.   I had antique rag shuttles, but preferred to lay in the weft by hand. 

I used Maysville 8/4 cotton carpet warp because it was extremely strong.  I usually put on a black warp as i felt it brought out the colors of the weft fabric (dark colors recede.)  The black warp became my signature.  You can find it and other supplies at Great Northern Weaving and Edgemont Yarns in Kalamazoo.

Suzy

ps Claudia, the Tie purse is very nice -- what is the size?  I love the closure piece, too!

 

francorios (not verified)

Good idea for a group Claudia.

Here is the first piece I ever wove on my Erica rigid heddle

Mini-rug 12"X23" made from one inch wide denim rag strips that I spiral cut from the legs of denim jeans as decribed in an internet article and handwoven on Erica rigid heddle loom. This photo is after I washed in washing machine.

I recommend a visit to the Crazy As A Loom website to see how she processes blue jeans for weaving rugs

http://www.crazyasaloom.com/id51.html

Have a good day!

suzyhok (not verified)

Franco:

What a fun rug... and done on a rigid heddle loom, too!  

FYI... In the 30 plus year I wove rag rugs... I NEVER sewed them together.  Unless you are set on using a shuttle you don't need to... and even with a shuttle, it isn't absolutely necessary.  I cut the end of each strip in a deep angle and then mitred the two strips together on the loom.  If I wanted crisp stripes of color I ended at the selvedge and folded the angle back into the same shed... if I didn't care about color changes... or was adding more of the same I just cut angles and laid them in.  If you beat hard enough... the tips won't come out.  (I'm not so sure about a rigid heddle loom, you may not be able to beat hard enough to lock the tips in)  

Try it!  It saves SO much time!

Suzy

francorios (not verified)

Suzy -

I didn't sew the ends together, but since cutting in a spiral left the seams in, I left the seams in. There's a few lumps from the seams, but it did not bother me.

I won't use the heddle as a beater again, I think I was lucky not to break the 30 year old plastic heddle using it as a beater. Next time I'll use a stick as a beater.

I'll keep the angle end process in mind for the next one.

Have a good day!

Caroline (not verified)

That purse is lovely, Claudia! I've thought about trying ties out after I saw a bag project in a book, then I priced them at my local thrift shop and changed my mind!

The closest I get to recycling at the moment is sari silks - yes I'm still on my silk kick, and it doesn't look like slowing down  any time soon. I have some sari ribbons, strips of silk fabric between 1 and 4 cms wide, cut straight across from selvedge to selvedge, and I have plans for using those some time - this group will probably be the catalyst for getting that project off the ground.  I do need to use a stronger loom; I'm using my Knitters Loom at the moment and its not really built for tapestry work. There isn't room to use a tapestry beater, so I am using my trusty dog comb to pack the weft down, and getting the right tension is a bit tricky, but I do have other looms I can use.

Suzy, I've heard some rag weavers say they use a bit of white glue to hold the ends of the strips together - its enough to get the new weft beaten in and comes out in the wash afterwards. Is this necessary? I was using it when I was making little table mats and drinks coasters on small square looms out of sari strips, and it worked well in that situation as the silk ended up under great tension by the time I got to the last few rows.

claudia (not verified)

Hey Suzy,

Thanks, the purse measures about 7" long and 4.5" wide. I sewed it together with a heavy duty thread and added the webbed strap. The closure is for weight, it doesn't actually secure the flap. We have had it for about a year at 6 different craft shows and people look at it and walk right by. I am not sure what price we have it at right now. We did a show the night before we left for vacation and everything is still in the suitcases we use to pack and tote our products.

I have use the Maysville 8/4 cotton on all my rugs and the tie purse. A friend and I shared a huge lot we found on eBay with a wide variety of colors. I usually use 2-3 different colors based on the fabric I plan on using.

The bathroom rugs made from old towels are next. Not sure about the warp color, I'm low on black right now. Brown or dark beige would look great in the chosen bathroom.

Claudia

suzyhok (not verified)

 Hi Claudia:

Thanks for the info about your purse.  It is really nice and I'm sure you'll find the right customer for it.  Sometimes it just takes a while.  I did shows several years ago and found them SO tiring and stressful.  Now my daughter is doing them with her bags... not handwoven... but "designer" fabrics.  She gets about as much for hers as I could get from my handwoven, far more time consuming ones!  But... she's getting frustrated with everyone wanting items under $20!  

Have fun with those bathroom rugs.  Can't wait to see them here on Weavolution.

Suzy

djfiberarts (not verified)

I like that Great Northern site! I like the prices even better :) When you used 8/4, did you double up the warp...in other words slot in the reed?

DJ

Diane By the River (not verified)

I'm sorry but I'm a "newbie" and my picture took up the whole screen!!  Anyway, I've been weaving with "rags" for a couple projects using 1/2" strips of fabric that I've purchased over the years  from garage sales.  i use a Schacht rigid heddle loom that I have assumed is not heavy/sturdy enough to handle traditional rug weaving and so have contented myself with weaving a few bags and a scarf as gifts for the holidays.  In the future I'm thinking of a Saki-ori style vest made from similar "rags".

I'll post photos after I get them down-sized a little!!

claudia (not verified)

Hey Diane,

To down size the pictures, once you have uploaded it, there is a box to the left of the preview box. You can change the width and the height will automatically change to keep it in the correct proportion. Try again, please, we'd love to see it.

Claudia

TinaHilton (not verified)

In addition, once you have it in your message, if you click on it you'll see a box outline around it.  You can then grab a corner and pull it in to make it smaller.

Diane By the River (not verified)

Here is a "huge" close-up photo of a small bag that I made for a daughter's birthday.  I didn't really think she would use it but I did think she would appreciate it.  I used 1/2" strips of cloth from one of my skirts that I don't wear and wove one strip of cloth followed by 1 row of Red-Heart Eco-Cotton yarn. I used a rigid heddle loom with a fairly narrow warp of about 4-5".  After I was done I decided that the fabric didn't have enough drape to it to be a scarf so I decided that it would make a nice bag when folded in a zig-zag way to be stitched together.  I made 2 and both daughter's appreciated them but it involved way to much hand stitching so after that I did make a scarf with different fabric strips that turned out quite well!!  I found the instructions for the 4-strand round cord in  Virginia West's book on finishing woven pieces.  So for now -- keep on weaving!!

 

eggplantlady (not verified)

Thanks for sharing, Diane by the River - your bag is terrific!  How do you keep the edges of your fabric strips from showing? 

mischiefmanaged (not verified)

I remember seeing a rag rug made on a 32" Ashford rigid heddle  loom in an old issue of their newsletter, The Wheel. I'd like to try some rag rugs but I have a 16" rigid heddle and a backstrap setup. I've been thinking I could try join some narrow strips together; it might be sturdy enough to be a rug for shoes . . .  or would it?? I could use a beater rather than the heddle to pack the weft in. Hmm, what else could I try?

claudia (not verified)

I know a number of people have had success making rag projects with rigid heddle looms. You would need an alternative method for beating, the heddle is not strong enough. 

People have suggested cutting the rags to 1/2" wide strips and using a hand beater. I have only used 8/4 carpet warp for my rag rugs and my only experience is with a floor loom, so I am the wrong person to help with ideas for making a rag rug on a RH loom. There are two factors you need to be aware of, beating, which you have covered and tension. What type of RH loom do you have and how's the tension?

Claudia

mischiefmanaged (not verified)

I have an Ashford (no-folding) 16" and it holds tension well. Maybe in January I can make a sample and see how it does.

Caroline (not verified)

I'm using my Knitters Loom for a weft faced tapestry weave at the moment, using the rigid heddle for changing sheds only, and using a heavy dog comb to pack the weft in. Its not quite rags, but the sari silk yarn I'm using is close enough, and it completely covers the warp. Tension is as tight as I can get it and is holding well, but I would not recommend it for any heavy cloth such as is needed to make a floor rug.

Once this warp is finished I won't use the loom again for anything like this, this is pushing the loom to its limits, and if the regular loom is made in similar fashion to the KL, its probably not strong enough. The weak points are where the front and back beams go into the side pieces on the left hand side, and its the front joint on mine that is a bit wobbly.  The front of the KL has a cross piece just behind and underneath the front beam, and this reinforcing makes all the difference.

PattyAnne (not verified)

Has anyone used the Great Northern loom, ORCO 74 LOOM.

I am thinking about getting one for weaving rag rugs.

PattyAnne (not verified)

Oops sorry to have posted twice...

sandra.eberhar…

I have never used one, but I have seen several when visiting Great Northern.  They look like very sturdy looms with the right features for weaving rugs.  I beleive they are made by Kessinich, who makes great stuff.  

sally orgren

It's called "Not Your Grandmother's Pot Holder/Rags to Multi-harness Riches" (and here is the photo attached to the description.)

I know the instructor, Peggy Hart, as she has presented at several Weaving History Conferences in the past. She is a professional weaver working on Crompton and Knowles W-3 looms, and some of you might know her presence at Maryland Sheep and Wool (Bedfellows Blankets). She also warps the looms for the Boott Cotton Mill, in Lowell, MA.

The dates are July 29 thru August 2nd. 

A paraphrased description of the workshop— students will learn how to make continuous weft from t-shirts, then sample structures like multi-block rep, spot, corkscrew twill, S&W and work on 4 & 8 shaft looms. Possibilities range from rugs, to lighter weight bags to table linens. Weaving experience helpful, but not required.

To find out more:

http://www.fletcherfarm.org/classes.asp?CourseID=55261792

If anyone goes, I'd love to hear about the class and see photos!

Submitted by Anonymous (not verified) on