My first project. I thought I would try to make the placemats in Hand Woven nov/dec issue article Elegant placemats.

The problem is the fringe. Can anyone tell me what happened? The directions say to machine wash and dry.  I used pearl cotton.

Thanks for the help. I would like to prevent this if I try them again.

Deb-in-MI

 

 

 

 

 

 

Comments

Sara von Tresckow

Well, for one thing, seasoned weavers know that fringes done this way on cotton or linen household items don't hold up really well when laundered using a washer and dryer. I might consider placemats or runners that way, but never a towel. And if fringes are used, I recommend handwashing.

Yes, the magazine suggested it - BUT those ends of the fringe will untwist. Cotton, being a short fiber will pull out of the yarn and give you ends that look like your photo. Part of the problem is the very softly spun, bulky cotton. Cotton - to be durable needs to be hard spun with lots of twist - and the yarn should be thinner. 

1. I'd chalk it up to experience and clean up those fringes with a good end clip (just to remove the fuzzies at the tip) and relegate those placemats to future handwash items. That way you can use them for quite a while before they begin looking ratty.

2. In the future, consider this and know that fringes are decorative finishing - and for items that will take hard wear, some type of real hemming will be better.

3. If you make cotton so bulky and soft, you get problems similar to what knitters will face with these "new" bulky merino singles - no real strength, lots of pilling and untwisting, etc. You might want to try working with finer cotton yarns that are spun for weaving and see how they hold up.

Deb-in-MI (not verified)

Sara

Thanks for the information. I will, definitely, make note of this. My hand-wash pile is getting bigger. :)

Deb-in-MI

Joanne Hall

Hi Deb,

Sara gave you some good suggestions for the type of thread to use for fringes.

You mentioned pearl cotton as if you meant to say that it should have not raveled out like this.  Remember that this is a  mercerized thread, which adds sheen to the fiber.  It does not mean that it is a higher quality thread.

A higher quality thread would mean that it would be made from  a long staple cotton.  In the US we mostly have the shorter fiber cotton, which makes threads which will ravel more quickly.  And the thicker the yarn, the shorter the staple length is.  Longer fibers are necessary to spin the finer threads.

Long staple cotton is grown in Egypt and in South American.  So if you want to have fringes, look for a longer staple cotton.  Another way to be sure you have a longer staple cotton is to purchase finer threads.  You can always double or triple a thread to make it weave as a thicker yarn.

Joanne

 

Aunt Janet (not verified)

Very interesting, Joanne.  I have several cones of 10/2 cotton that breaks when I give it a gentle tug.  Definitely short staple cotton.  Do you know of sources that sell longer staple cotton?  How do you look for longer staple cotton?  Will it say Egyptian cotton, or some other clue?

PS, I've been weaving bands this week on the counterbalance   band loom that I bought from you at BSG this summer.  I'm designing a beater to use with this loom.  My first one needed an angle change.  I've also carved some "bone" type shuttles.  This is sure a fast way to weave a band.  Just wanted to let you know that I'm enjoying the loom.

Janet

Joanne Hall

Hi Janet,

I am glad that you are enjoying the band loom.  We will be at Black Sheep again this year.  Will you be there?  I would really like to see the knife and shuttle you have made.

The cotton threads from Sweden are made from Egyptian long staple cotton.  It is not easy to find long staple cotton, but if you ask the places where you purchase yarns, they might tell you if they have any.  If you want them to supply Swedish threads, let them know that they can contact me.

Joanne

Aunt Janet (not verified)

Thanks, Joanne,

   I've been over on the Back strap weaving group learning techniques from Laverne, but I wanted some speedy weaving for some Christmas presents, so switched to the Glimakra band loom.  I'm applying the pick-up techniques that I learned from Laverne.  

   I will probably be at BSG once again.  I haven't missed one since I started attending about 5 years ago.  I'll bring along my tools to show you, but I can also post pics here.  I'm not getting the sword till Christmas, since I designed it, but DH is making it for me.  I'm going to keep re-designing it till I get it right.

PS, I'm sorry I hijacked this thread.  I've got to discipline my tech side more.

Janet 

Submitted by Anonymous (not verified) on