sewwhatsports (not verified)

I am doing a scarf with tencel for my Mom for Mother's day.  I did just a 4 harness pattern but the treadling is 32 picks long.  I love how it is coming along and love working on my 'Baby'.  But I do not love the brake system as it is now and am waiting for the friction brake I ordered to arrive.  When I release the back beam brake, the whole warp will sag.  I am finding at the moment it is a slow 2 handed process to advance the warp.  Luckily this is not a too long warp.  But it is a great project for the first one on this loom.  I will try to get pictures as I do more.

 

Rena

lkautio (not verified)

If you set off the tension in the front before letting the brake go it will not jump.  LeClerc has a little device which does the same thing as Michael is suggesting by cranking a rubber stopper against the back beam to provide some pressure when the tension is let off.  They call it a "Warping beam advance control system" - see it here on the left:

http://www.leclerclooms.com/ind_eng.htm

Laurie Autio

 

sewwhatsports (not verified)

I tied on a small backlash cord and it seems to help for the moment.  I am hoping that the friction brake will take care of this when it arrives and I can get it installed.

Rena

sewwhatsports (not verified)

arrived for my baby and after a bit of knashing of teeth, a call to Rick at Macomber and a bit of frustration, it is installed.  And I think I am going to be very happy.  I also added a washer between the front beam advance lever to tighten it closer to the ratchet and that seems to be in better shape too.

I also got another 200 heddles that need to be added to the harnesses but that will be done later.  And lastly I think I now have enough hooks for the tie ups I want to do for my overshot project. 

WAHOO!!  I am ready to go forward on my next project on the Baby :)

 

Rena

andsewon (not verified)

Don't forget to put links here to pics of your projects, Rena!

Mary Rios (not verified)

Hi Joanne,

I have even tension on the warp - No bubble in the weft - no fingers - it has something to do with the way the warp threads are coming from the heddles - i think. i thought a few inches of weaving would separate them, but it hasn't - i am curious!

Mary Rios (not verified)

Hi Joanne,

I have even tension on the warp - No bubble in the weft - no fingers - it has something to do with the way the warp threads are coming from the heddles - i think. i thought a few inches of weaving would separate them, but it hasn't - i am curious!

Claudia Segal (not verified)

Mary,

Is this a CB or CM loom?  Any chance one of your lamms is getting caught on something under the loom?  Texsolv heddles crossed on the shaft?  I had this happen once and found two heddles were crossed at the top only and I had to cut both warp threads out and add a replacement warp thread.  Once I did that and fixed the heddle, it was fine.

Claudia

Mary Rios (not verified)

Hi Claudia,

Countermarche - i double checked all you suggested. nothing is getting caught. it's strange because the more i weave the more pronounced it becomes. I think i'll switch to 12 vs 34 and try that.