DebbieB (not verified)

But I do use lease sticks, on the front beam, to hold my cross while sleying the reed and threading heddles and beaming on my warp. I'd love some way to hold the cross in front that wouldn't interfere with the beater. I'll have to see if my husband can rig something. I've already shown him your brake pedal extender dowel, Michael, and demanded something similar. :)

andsewon (not verified)

Michael, I was just looking at the raddle that came with the loom. It might not be homemade afterall. It is wider than the loom, but that's not all that bad. It is long enough that it sits nicely across the cast-iron braces that hold the back beam in place. It has little blocks on the end so that it can't slide too far left or too far right. Once I get everything together upstairs and out of the garage, I'll take some pics. ;o) Connie

andsewon (not verified)

Yeah, she can *try* the sugar and honey approach, but if he's like my DH, it won't work. If I don't demand it, he just thinks I'm not all that serious. LOL I think what runs thru his head is, "Well, she didn't demand it, so I guess it's not all that important if I do it or not." ROTFL Wouldn't trade him for the world, though. ;o)

DebbieB (not verified)

Michael, you made me laugh! Oh, my husband is such a sweetie. He's always interested in improving things - he's an electrical/computer engineer, and "tweaking" things is part of his DNA. :) Also, my version of "demanding" includes batting the eyes and smiling very sweetly. :)

My loom is a 32" 10 harness 14 treadle Ad-A-Harness B5. The inside of my castle uprights is completely taken up with the jack rods - since there are 10 of them. So I'm not sure where I can attach anything extra.

DebbieB (not verified)

I want the lease sticks to rest on the front beam while I sley the reed and thread the heddles and tie onto the back apron rod, and then I slide the lease sticks down the warp chain as I beam on - it keeps the warp smooth and tangle-free.

So what I want is something that will support the sticks while I'm working on the front, and then fold away when I no longer need the sticks supported.

Right now what I do is put another pair of lease sticks through the harnesses (across both front and back beams) and rest my working lease sticks with the cross on top of those sticks.

There is a product called "angel wings" from Purrington

http://www.purringtonlooms.com/accessories.htm (scroll down)

that does this - but it's costly, and I'm hoping my DH (who is smart, but not very handy with woodworking) can manage something similar for me.

tien (not verified)

I used to leave in my lease sticks, because I had been told to leave them in and was afraid to try removing them.  Then Laura Fry told me that she didn't use them, and encouraged me to remove them on one warp.  I took them out and found that I really didn't need them after all!  I could locate broken threads just fine without them (even when using very fine threads), didn't need them to untangle the warp threads (if you beam on correctly you shouldn't have tangles anyway), etc.  If I wanted to remove a warp, I could use a treadling/tie-up that would give me something close to plain weave - not perfect, but good enough for a cross.

Leaving the lease sticks in just meant that I had to get up every couple of inches, walk around to the back of the loom, and re-set the lease sticks.  (I know some people just tie the lease sticks to the back of the loom, but that didn't work for me - I work with very fine threads and had too much breakage.)  It also shortened the distance from front to back on my (small) floor loom, which reduced my shed.

I would encourage you to try leaving them out on a warp or two to see whether it makes a difference for you.  Everyone weaves different things, on different equipment - what works for me may not work for you, and vice versa.

The one thing I do want to assure you of is, if you leave them out, your loom will not explode and you will not have a total disaster on your hands.  I know that sounds silly, but I was afraid that would happen the first time I tried it, and was greatly relieved to discover that it didn't.

Tien

naturalfibres (not verified)

to me the purpose of the lease sticks is to keep the cross when winding the warp on the loom, so once the warp is on and I'm ready to start weaving the lease sticks are no longer needed.

Mike (not verified)

Thank you all for your very helpful replies.  It sounds rather like different warping techniques:  use whatever suits you!!

Mary Rios (not verified)

that helps! i'll reread the instructions to see what i missed!