Caroline (not verified)

I have to stick my hand up to being one of those fascinated by the Mobius strip, and I have knitted several shawls, as well as baskets and have also used them for bag straps. As bag straps they sit quite nicely, and so do the shawls, despite the half twist. I also find the mobius strip ideal for making wrist distaffs for spinning, because of the way they sit on the arm they are less likely to slip down and off the hand as you move it around.

But then I also live in Australia.....................

TinaHilton (not verified)

 Man, you guys are just bound and determined to get me to weave off of my floor looms, aren't you.  This looks really neat! But what do you do when you have enough woven  so that the twisted warp yarns want to come up?  Do you just twist the woven part that's underneath so that the warp threads are now straight?  Or does it miraculously do that on its own?  I've gone over the instructions several times, but I just don't see any obvious explanation of it.

Caroline (not verified)

THATs why the mobius gets me going! Doing a strip then putting in a half twist just does not cut it for me, hehe!

You would be making a circular warp so its possible to keep the part of the warp you are working on straight even though you are moving it on every now and then.  I'm not sure if you would eventually be working from the back of the warp rather from the front and what would happen to the heddles, but I intend to find out once I've got over a craft fair I'm spinning for.

When you knit a true mobius, you always have a right side facing you and it takes 2 circuits to get back to your starting point; its the same if you crochet a mobius, so weaving will be quite challenging mentally, although any stripes you put in will be totally symmetrical.  I have a few problems actually visualizing how it all goes together, even with the photos.

Kurt Pippin (not verified)

It says:

"The next photo clearly shows the twist in the warp. While weaving this twist always stays underneath."

As you advance the warp, the woven fabric will move into the twist that's kept in place on the bottom side of the continuous panel. You won't have to do anything. The loom bars keep the top side as a flat panel and the bottom side with the half twist. Just keep enough tension as you advance the warp so that the half-twist doesn't roll over the near loom bar to the top side.

It may be one of those things you just have to do on faith until you see it working.

Yes, Tina, you must do this. Resistance is futile. Join the Stick Side. You can freely return to your floor looms after you do this one thing. If you still want to return then. Mwahh-hah-hah-hah-hah!

Pip

TinaHilton (not verified)

Well, I will be spending 3 months in warm Florida this winter in my motorhome.  That's three months without my big floor looms!  I intended to spend a lot of time spinning, knitting, needle felting, and weaving on my small frame looms but now plan to add a backstrap loom to the list.  And I showed this project to my husband, who won't admit to being a weaver but does a very good job with inkle and card weaving.  He's very intrigued by backstrap weaving now too. 

Kurt Pippin (not verified)

That's just it, you never reach the twist. It stays on the bottom at a fixed point while the warp and fabric rotate through that fixed point. The woven fabric rolls around the near loom bar to the bottom side, and when the woven fabric reaches the point of twisting, it moves into and becomes the twist.  Advance the warp some more, and the beginning of the woven fabric passes the twist point and moves onward toward the far loom bar. The fell is a somewhat fixed point on the top side, while the twist remains a somewhat fixed point on the bottom side.

Pity I can imagine it so clearly but have no interest in making one.

Pip

dteaj (not verified)

 

Claudia,

Sorry I missed you all this year. I lost track of where it was supposed to be.

I suggest indoors as a meetup  spot, since you never know about the weather. Warm and dry are good things!

 

Little Meadows (not verified)

You are a nice friend!  I haven't used Procion dyes myself but have some undyed tencel to work with sometime this winter so please do write about any differences you find with that fiber.  Isn't the Prochemical site great?  I use their acid dyes for wool and have always been pleased.  Liese

Little Meadows (not verified)

Thanks very much for that mother lode of info. Liese

Guiding Myth (not verified)

 Hi Su,

I  dye with Procion dyes using a dedicated (used only for dying/never for food) microwave, more or less using ProChemical and/or Dharma's instructions.  I do my dying in the garage and otherwise would only be able to dye a few months out of the year.  I enjoy the freedom of dyeing my own colors designing my own yarn.

Best wishes.