Helvetican (not verified)

I have the standard Schacht model which I've had for a number of years and really like.  I also have the chair loom that my grandfather used.  It works beautifully.  If you haven't cut your homemade model up yet Aunt Janet, I might be able to help you modify it.

Aunt Janet (not verified)

No, I haven't cut it up yet.  It is stashed on an upper shelf at the moment.  Back burner.  I'll get it down one of these days and post a photo.  I wouldn't mind getting it to work more comfortably, and warp easier.  Thanks for the offer.

Aunt Janet

Helvetican (not verified)

Well I know that you're resourceful enough to get it going from just these couple of tips if you ever want to.  I'm guessing that it's similar to the homemade one in Nina Holland's book, and a lot of these were made in the seventies.  I brought the one belonging to our guild home and modified it, and now members are able to use it.  First, use a separate dowel rod for your heddles, not being able to pop detachable heddles on is a huge pain in warping.  I use a vise to hold the dowel in place beside the loom while putting on the heddles.  Rig up whatever you can to hold it in place while you put them on.  I bet you have a vise!  I have a hole drilled in each end of the dowel, and after putting on the heddles I tie the heddle rod to the base and front upright of the loom.  Running the tie cord through a hole keeps it from slipping off during weaving.  This is all you need to do to get the thing going if you're weaving a narrow band, but for narrow bands I like my open-sided Schacht better because I like to hold it with the back resting on the floor, and it's less bulky.

The nice thing about one of these is that you can weave wider, but this doesn't work very well unless you make another modification.  You can't weave very wide changing sheds with your hand.  So. . . put a couple of cup hooks or pegs near the top of the front upright.  Find a couple more dowels, about 1/2 works good, drill holes near the ends and clamp the shed that you normally manipulate with your hand between the dowels, by tying the dowels together.  Lift the shed by the dowels and rest them on the hooks or pegs (pegs work better because you can pop it off and on faster - put them in at a slight upward angle).  I've woven up to 10" wide on this loom this way, and you can't do this on any other inkle.

Helvetican (not verified)

If you don't cut up your tensionless ones, I might have a solution for them too.  I would need to see a picture though.

Evelyn (not verified)

I assembled a copper pipe loom for tablet weaving using Micheal Cook's instructions - very easy and a great loom. I think the version made by Sarah Lamb has another bar across the bottom to put heddles on for other band type weaving.

I have finished two samples (bookmarks), photos in my projects.

Evelyn (not verified)

You are right Tommye - all of these are based on Archie Brennan's original plans - such a great idea.  There are so many variations and one can take apart one form and use some of the pieces for assembling another  type loom using a few different sized pieces. 

newtoweaving (not verified)

I did have a heddle loom about 25 yrs. ago. I was not as in to weaving as I am now, so I am desirous to try again. I can track with these instructions pretty well, but is there any way I can see a pic of the finished product? This sounds like it will help solve the shoulder/muscle problem, and lifting a dowel heddle will be easier on the carpal tunnel. Oh my-----I sound as if I'm falling apart! ha ha But, after knitting/crocheting/spinning/smocking/dollmaking/quilting/ and the like since 1974, I feel I owe it to my now arthritic hands to give them a break wherever possible. Pleeeeeaase let me know where I might see a few pictures of your modifications. Thank you! Mary

Silverwheelyarn (not verified)

I'm Traci, a part of Silver Wheel Yarn is a weaving studio in downtown Lexington, KY specializing in hand woven heirloom quality textiles, spinning, knitting  and education in these crafts.  I work off an antique 1920's Berea Hilltopers Guild Loom with 4-shafts.  The other half of SWY is my husband and fellow weaver who has this strange ability to produce crazy complicated loom patterns all designed for a 4-shaft loom.  We will be leading the first weave-along when the system gets up and running.  I look forward to meeting everyone and working with you soon. 

Aunt Janet (not verified)

Hi Traci,

   I'm Janet.  I've been weaving on an unknown brand, four counter balance loom.  I took two terrific workshops from Robyn Spady in the last year on the subject of weaving complex weaves on four shaft looms.  Her workshops are titled "Fab Four", and "Extreme Warp Makeover".  I have learned a lot, and will be applying those lessons in my weaving. 

I'm currently struggling with warping a 30" 20 epi, in 10/2 cotton.  I've threaded huck lace, and will try some of the weave structures we learned in "EWM", as soon as I get this warp under control.

Janet

Silverwheelyarn (not verified)

I understand, mines a counterbalance.  I like to say there like mules; hard workers when you get them going, but doing so is where the "temperamental" comes out.  I don't know what you exact problem is, but I find on wide warps putting sticks in your sheds up by your back beam helps with tension problems while you getting it wound.  Let me know if I can help you some how.