Caroline (not verified)

It really is worth learning to ply on a charkha, whether upright or book-style. I HATE plying on mine, but occasionally force myself to do it, because my trusty Saxony wheel is reliable, and slow, and my Ashford Country Spinner has a very very heavy wheel - you think you have thigh muscles??????? The ideal plying machine would have the bobbin size of the Country Spinner, and the speed of a charkha, lol!

The big disadvantage of plying on a charkha is of course the amount of yarn you can store on it;  thats not really a problem with regular weaving, but could be for backstrap warping where you do it all in one.

On the plus side, it will be highly twisted, and if you count the number of times you turn the handle, its no different to counting how many times the flyer goes round for one push on the treadle. Once you have worked out how many turns you need before winding on, its actually easier on the charkha because you have greater control over how much yarn gets plied then wound on at once. How fast you turn the handle doesn't affect the number of times its turned, and you can feel the tug of the yarn once it hits that sweet point and shortens. It doesn't take long to work up a consistent yarn. The other alternative of course is to use our spindles.

I'm glad you mentioned using the 20/2 as that is what most of my cotton stash is, with some as fine as 40/2, and while I know Laverne works with yarn as fine if not finer than that, her eyesight has to be much better than mine! I obviously did not like carrots as a kid.

Aunt Janet (not verified)

 OK, I got my charkha out and have been spinning on it the past few days.  After oiling it up and a bunch of bees wax in the appropriate places, it is spinning well.  I had some good sessions including some plying.  I think plying will be a breeze with a little more practice.  I'll keep up the practice, and I'll bet it will become my favorite wheel in time.  Thanks for the encouragement.

Aunt Janet

Caroline (not verified)

Thats great! There is a charkha group on Yahoo groups:

groups.yahoo.com/group/charkha

they are very helpful and encouraging, and can help with tuning up your wheel, extra tips for productive spinning, etc. I would never have managed to learn to use mine without their encouragement! You probably know half the members already, hehe!

Aunt Janet (not verified)

Hi Caroline,  Yes, I'm on the charkha list.  There is a lot of cross list participation, I'm sure you know.  I think I've seen you on the charkha list.  I know we have a bunch of Weavo forums in common, (I just looked at your profile, and it looks like we have most of the same forums.  Great minds!

My charkha is Alden Amos' Bull Pup.  It isn't as finicky as the Indian charkha but it still needs some tuning.  It needs oil at the wheel shafts and bee's wax on one of the hubs under the thick drive band.  The wax wears off and the wood in the hub groove gets very shiny and slippery.  I think this is a design defect and I'll talk to AA about it.  I think it needs some roughness in that groove to provide grip rather than the pretty slippery surface it has.  

When I finish with this milk fiber I'll give it a spin with some commercial spun wool that needs a re-spin.  It should be a breeze.

Later....

Aunt Janet

 

wombat (not verified)

You can respin without any 'real' equipment - but it does take time (not as much as you'd think, but it does take time!)

Take your trusty nostie (which is simply a stick used to transfer yarn from a skein into a square-footeed ball which won't roll around). There's a youtube video of one in use which is quite clear at http://www.youtube.com/watch?v=MPMmopJHzq4.

If you HOLD the yarn firmly on the nostie and rotate the 'stick' as if stirring something in front of you it will build up twist. I find sitting down with my foot on the yarn under a chair and the yarn coming up and over the back of the chair in front of me works well. When it is tight, grab the twisted section in your free hand, relax the tension a little and wind it onto the nostie. Hold the ball of yarn on your nostepinne so it can't esape, pull a little more yarn over the back of the chair and do it again.

Slow, but it works - and if you don't have a notepinne, you can use a wooden spoon handle or anything else comfortable to hold. Not good for wrists, but if you need an extra 20m (20yards) or so its quick and easy to do. Vicious arm workout if you do much.

 

Using a drill - the easiest is an electic drill. Old fashioned hand drills work a treat as well. Put one hook like you'd use for hanging cups where the drill bitt would normally go, and another into a piece of wood. Sit a cordial bottle with a little water (or something similar like a piece brick) on the wood to weight it - it won't need a lot. Put the wood on the floor (or kitchen table or workbench). Use a half-hitch to hold the yarn you want to respin in the drill and wood hooks. Switch the drill on. When the yarn feels it has the right amount of twist in it, measure how far the wood dragged.

Carefully slip the half-hitch end of the yarn off the drill. wind into ball. (a wide rubber band can be useful here to stop escapes from the ball rolling around or being cat- or kidnapped). Unhook the yarn from the wood sled/weight, tranfer to the drill, unwind another section of yarn and half-hitch onto the wood piece, and repeat.

By varying and recording the weight, the length of yarn, and the distance you drag the weight (i.e., shorten the yarn) before you stop, you can get pretty much the exact same twist every time.

This is, by the way, a variation of a traditional 'rope walk' method of plying. I've seen it done using both and bent piece of scrap steel made into a crank handle, an old bicycle wheel spun by hand and the revolutions counted . . . very much like the old flax wheels (cinderella, anyone?)

P.S. Don't use the good drill for this if you are doing it a lot. Use a $20 cheapie-on-sale. You won't normally be making the drill carry a lot of weight but it will be doing a lot of revolutions!

Marsha A. Knox (not verified)

I have heard/read from Laverne that alot of the indegeous weavers re-spin acrylic to make it more condusive to warp face weaving.  Give it a shot.  The worst thing that can happen is that it is not good for warp face and you weave it on one of you many other looms.

missbeckyohh43 (not verified)

What is the purpose of respinning commercial yarn for backstrap weaving? I have not read anywhere that you need to respin yarns for other looms' warps.  Can anyone fill me in here?

 

Claudia Segal (not verified)

Respinning the commercial yarn makes it firmer and smoother and easier to work with on a backstrap loom.  It's especially useful with a soft wool.  I have not needed it when using cotton for the warp.

Claudia

missbeckyohh43 (not verified)

Do you need to respin for other looms?

claudia (not verified)

I just finished reading "The Age of Innocence" by Edith Wharton and now I want to read the book you just quoted.  What is the title?  It's prose that reads like poetry, how lovely.  Thank you for sharing that passage, Laura.

Claudia