AutumnWeaves (not verified)

That is one big boy there! 

AutumnWeaves (not verified)

I have yet to use a copper loom.  I can't get past the copper and not wood thing but I may have to get over that.

Caroline (not verified)

I've just put together a basic copper loom, but I also use artists stretcher frames. If you take the view that all a loom is, is a device to hold the warp threads under tension, then as long as you can warp it up, its a loom!

antitrades (not verified)

I decided to go cheap when I started since I didn't know how much I'd keep up with it.  What I have is a little ricketty but I love it.  With a little work I could join the corners better and maybe someday I will.  I love this loom though and I'm not sure what advantage there would be to buying a manufactured one.

I only took a picture of the corner.  The top beams are red oak since I wanted a hard wood to support the tension.  The side beams were sold as ballister beams and I think they're poupler.  I figured they worked since I'm using them in a function that has the same sorts of stresses.  Some metal supports to join the corners and a ton of brad nails to hold the warp.  The bar on top is the heddle bar.  I clamp it onto the side when I'm using it.  Right now it only has the middle section of nails because I haven't woven anything that large yet.  As needed I'll take the time to add more nails. 

Only problem I'm noticing so far is I'm going to need to bind the heddle bar to keep it from splitting.  It's the cheap white wood that you can buy for $1 from Home Depot.  Maybe a better wood would have prevented this.  Oh, and I need a better way to attach cartoons.  Right now I have a peice of yarn that I attach it too but it's so floppy when long it's not that easy to use.

Trey

Loominaria (not verified)

 When I first replied, I didn't realize I was in the tapestry forum. Let me try again.

I have a Mirrix tapestry loom that I've never used, because I've been too lazy to make the heddles. Pathetic, I know. But if I continue to be so lazy, I may warp it and use my fingers and pick-up sticks and weaving needles without the heddles. Beyond the lazies, it may also be a matter of the Mirrix being made from That Which Is Not Wood.

I also have a couple of hand-held looms from Tornadowood that I love, the Bookmark and Paperback (the names refer to their size). I'm not sure if they're making looms anymore but the website is there.  I'll e-mail them and report back.

And I just received a Journey Loom, which will be another easy-portable loom for tapestry, providing a larger frame than the hand-held looms.

As Caroline mentioned, anything that holds a warp under tension can become a loom, so I will also be looking at other looms not primarily made for tapestry, and other sturdy things, with the possibility of tapestry weaving in mind. I recently started a needle weaving group here focused on the method of stringing warp over pins stuck into a board--the weaving on such warps usually takes the form of tapestry, often with bead embellishment.

Kurt

Loominaria (not verified)

Feeling virtuous because I made some string heddles for the Mirrix last night.  Made 20 from crochet cotton that didn't feel like mercerized, then I happened to try some C-lon bead cord that was sitting nearby.  The nylon holds a square knot firmly, much to my surprise, and feels much stronger than the cotton.  I'm using a wire jig with two pegs to measure the loops.

Kurt

Caroline (not verified)

One of the other weaving groups a while back mentioned using beading thread for heddles as its fine and strong. I bought some to try the other week. I like the idea of using a jig for heddles, and am trying the method that Debbie Mcclintock has photos of on her blog. You can find these in her travels in Asia ( frantically looking for the URL!).

homepage.mac.com/debmcclintock/Menu3.html

this is her old blog and if you scroll down the page you have links to her trips around South East Asia - I enjoyed browsing through them.

The loom piccies are well worth studying.  This gives a continuous string heddle looped around a piece of wood or strong card to keep the heddles the same size. I have yet to do it over a large number of warp threads but have tried it over a short run on the backstrap loom..

aliced3786 (not verified)

 I am thinking about buying a schacht 25" tapestry loom. any opinions would be appreciated.

Thanks

Alice

Loominaria (not verified)

Hi, Alice--

I recently received the Schacht 18" tapestry loom and table stand, but I haven't warped it yet.  The tension bar supported on wing bolts doesn't feel as rock solid as the all metal tensioning system of the Mirrix, but I'll have to warp it and start packing some weft before I decide how durable it's really going to be. I do like the almost-all-wood feel and portability of the 18" loom and the continuous warp method.

I was hoping to see some replies from experienced Schacht users by now. Maybe you would have better luck starting a separate post.

Kurt

aliced3786 (not verified)

 

Thanks Kurt, I think I've decided to buy another Mirrix. I have the 2nd to the largest that I use for knotted pile, so I will probably get the 16" to use for tapestry. I really prefer the tensioning system on the mirrix.

Thanks

Alice