Virag (not verified)

Actually its my doubleweave.  I came inside and rested for a while then put a new dowel rod in at the top and wove one more pattern repeat.  The cotton is now breaking strand by strand  as I pound down the weft!  ARGH!  I'm having so much fun regardless, esp. with all these learning opportunities.    The dowels are working ok so far and are wider then the railing so that's worked out well:>. 

I'm trying to decide for the weekend between the respun pattern and some hair yarn I have for rugweaving right now.

Virag (not verified)

Well, the warp had some other ideas and broke so here's my first piece.  This has been an awesome learning opportunity!!!!!!!!!!!!!!!!!!!!!!

Virag (not verified)

We must be!  Actually I'm finding this to be a very mediatative process.  Going back and looking at youtube videos of weavers has helped me with developing a workflow and it's starting to come much more easily.  I actually Love beating down the weft too.  So crazy that I warped another project as soon as this one was done:> 

esmecat (not verified)

as a spinner, i can absolutely confirm that YES it is in the nature of how it is spun.

tighter spun = more friction working within the yarn structure = more strength but less elasticity and softness

Caroline (not verified)

I've just done a trial run with some perle cotton, and what a difference! I just have to get used to working with something that fine, but it does have a lovely sheen and texture to it. Its working out at about 50 ends per inch in warp faced weave (its about 30 - 35 wpi). I used a contrast coloured weft to check I was covering it, and it also makes sure I take care with my selvedges, lol! now i can properly plan what i'm going to do, and since in metric it works out at 20 ends per cm, its not going to require much maths, hehe!

The thought of having to re-spin some cotton was not filling me with joy.

jeannine (not verified)

this looks good. I read all about it on your blog.you chose nice colors .

esmecat (not verified)

i did tie them loose enough so that they slipped off the pegs easily enough... but not loose enough to slide the loom bar in before removing them from the pegs.

i tried to clamp my rulers down tight... but i was padding my clamps with spare post it pads to protect my desk, and the pads slid with the pressure of the warps.

i really need to find a better warping solution. i may have to break down and make a warping board.

jeannine (not verified)

this is what i have for the moment:

Caroline (not verified)

Love the colours!  They are very pretty, and a nice modern design as well.  Are you doing this free form, or do you have a chart?