Donna Mac (not verified)

Hi Sue,

I also have a Louet Spring Loom.  I enjoy weaving on this very much.  Can you walk me through how to warp on with tension and advance the loom without getting up and doing it manually.  My weaving always turns out well, but there must be something I don't do when warping on.  For example, I've never known how tight to wind the screw that tightens the metal cord around the handle that moves the back beam.  Thanks for any help.

Donna

 

EileenR (not verified)

Hi Susan and other group members.

My name is Eileen Rickard and I live in Cape Breton, Nova Scotia, I have recently purchased a Woolhouse Tools Gertrude loom, 45" weaving width.  She is new to me although I am her third owner, Gertie came to me via BC then New Brunswick.  I am a member of the Lake Ainslie Weavers and Craft Guild and am familiar with jack and counter balance looms.  Gertie is my first   encounter with a countermarch, I have a warp on and will try the tie up soon.  I went for something really easy, so I don't have to worry about the weaving, just the loom.  I have on a woolen throw and will weave a mixture of plain and twill using a skeleton tie-up that I got of the internet  for eight treadles (the loom came with 10).  i hope this is the start of a "Great Big Adventure".

Best wishes, Eileen.

Glizzer (not verified)

Thanks Sara, I have emailed you and you've already helped me so much!

Glizzer (not verified)

I have the horizontal set up, there are two sets of jacks at the top.

Karen (not verified)

Hi, I have 2 Toika Liisa's.  One is 60" and the other 45" wide.  I really enjoy weaving on them, though I still have problems getting a nice shed on 8 shafts, especially when I have fewer threads on some shafts in relation to the other shafts.

I am getting ready to tie-up a 7 harness huck lace pattern.  So, every other thread is on shaft 1.  I was wondering about the optimum tie-up for ease of treadling and/or getting the best shed.  Should most of the shafts be tied to the upper lamms or the lower lamms?

Thanks,

Karen

Karen (not verified)

Hi, I don't see an option for emailing you privately.  I assume that is what PM means.  Maybe you could tell me your source for the notes.  Or, you could walk me through the steps.

Thanks for your response.

Karen

EileenR (not verified)

I am just completing my first project on my new loom, a Woolhouse tools Gertrude (45 inch weavable). When I bought the loom the tie -up cords were all pre- cut in two lengths, the short ones are all one length and so are the long ones. I have read people say that they vary the lengths of individual cords depending on the shafts they are attached to. My loom is working OK but some of the treadles when I depress them go down further than others, I have to adjust the pressure of my foot to make sure the shed is evenly open. i wonder if that is where having the different lengths of tie-up cord would come in? I have a couple more questions and observations but need more than 1000 characters so will post them later.

Dustbunnies (not verified)

Hi Donna,

I too have a Louet Spring - and have posted a photographic warping tutorial on my blog that may be of help www.dustbunniesundermyloom.blogspot.com. 

I've found that the more I use the Spring the better the tension works.  I loosen the tension nut so the thread is about 1/2 way down inside when I pull the warp on.  When the warp is in place, I retighten the screw to the point where the brake release is in a horizontal position.  Then forward the warp until the breast beam is vertical.  I have an extra copy of the Louet DVD on warping the Spring that I'll gladly send to you at no cost - just paying it forward.... Just leave a message with your email  if you'd like me to send it. 

Cheers

Lynnette

 

BrookfarmWeave… (not verified)

Hi,

I've just acquired an older Bexell Cranbrook loom. We are told it is 50 years old. It has no maker's mark at all on it. We are trying to get some history on th loom and perhaps some photos to help with the tie up for the loom.

The loom is Counter Balance (not Counter Marche)

Perhaps, is this the same loom you have?

Thanks in advance,

Debbie Emery

[email protected]

ilaine (not verified)

I've been a weaver forever, but know only a small handful of other weavers. I feel like I've been in a cave for twenty years and I'm blinking in the sunshine. Pleased to meet you!