Loominaria (not verified)

 Baseball stitch is the one I like best because it's flat and doesn't leave a ridge on either side. You place the edges side by side and take the needle from behind on one side, come through to the front, go between the edges, and come from behind to the front on the other side.  Back and forth, small stitches, always coming from behind (or always front to back, if that's more comfortable, as long as you're consistently one of the other).

Mattress stitch works well for joining stockinet knitted pieces, but I've never used it for weaving.  It's quite invisible on one side of the knitting, but bulky on the other side, and I'd think it would be visible and bulky with woven pieces.  If I were going to use it on to join woven pieces, I would first run and edging of crochet slip stitch along the weaving, and I'm not very good at describing these things, so I'll just stop here.

There is a Scarf Borders and Finishes forum that mentions some books that include joining techniques, if you'd like to stop by: www.weavolution.com/forum/1313

Kurt

Caroline (not verified)

hi Meg, I'm a spinner, who only knits under protest, sometimes crochets, and has tried felting. I've also dabbled, like you, in many other crafty and creative things, but in the end its the spinning and weaving that gets me in. I enjoy freeform, so this is tending to spill over into what I enjoy doing on a loom.

I used to enjoy hand-making bread, its good for working out frustrations, but I now use a machine. Nor am I a mathematician or scientist;  counting shafts and heddles leaves me cold. I've gravitated towards smaller simpler looms; my 4 shaft is grossly neglected with a half woven project on it, while my RH and frame looms are all warped up and ready to go.

I'm sure that everything we do and experience comes out in our crafts, and that the other craft skills we learn are reflected in our weaving.  Some people like the discipline weaving can require, others prefer the freedom offered by Saori, and probably most of us are somewhere in between, like myself at the moment. 140 epi! My eyes wouldn't cope, nor would my body (said she enviously!), but that doesn't really matter, as there is plenty room in the craft for both of us, and the more diverse our interests and experience, the more we can learn from each other.

If all the politicians in the world were taught to weave and join a Guild, wouldn't it be a better place!

Caroline (not verified)

hi Meg, I'm a spinner, who only knits under protest, sometimes crochets, and has tried felting. I've also dabbled, like you, in many other crafty and creative things, but in the end its the spinning and weaving that gets me in. I enjoy freeform, so this is tending to spill over into what I enjoy doing on a loom.

I used to enjoy hand-making bread, its good for working out frustrations, but I now use a machine. Nor am I a mathematician or scientist;  counting shafts and heddles leaves me cold. I've gravitated towards smaller simpler looms; my 4 shaft is grossly neglected with a half woven project on it, while my RH and frame looms are all warped up and ready to go.

I'm sure that everything we do and experience comes out in our crafts, and that the other craft skills we learn are reflected in our weaving.  Some people like the discipline weaving can require, others prefer the freedom offered by Saori, and probably most of us are somewhere in between, like myself at the moment. 140 epi! My eyes wouldn't cope, nor would my body (said she enviously!), but that doesn't really matter, as there is plenty room in the craft for both of us, and the more diverse our interests and experience, the more we can learn from each other.

If all the politicians in the world were taught to weave and join a Guild, wouldn't it be a better place!

cedar51 (not verified)

I am a weaver on sabbatical in that arena...however I do a lot of spinning and dyeing...

I spin at least 4 evenings a week during the Semester for pure relaxation. At moment I'm creating different coloured rolags from Merino 23 micron which is multi coloured in the end.

Dyeing in fits and starts...have plans for a bit of a marathon next week...when new vinyl is being laid in 3 rooms upstairs...I mainly wind up small skeins of yarn sometimes only 30mtres and then dye them - sold at my guild.

I don't do too many other things in life right now other than full time student at University attempting to get a BA!

cedar51 (not verified)

I am a weaver on sabbatical in that arena...however I do a lot of spinning and dyeing...

I spin at least 4 evenings a week during the Semester for pure relaxation. At moment I'm creating different coloured rolags from Merino 23 micron which is multi coloured in the end.

Dyeing in fits and starts...have plans for a bit of a marathon next week...when new vinyl is being laid in 3 rooms upstairs...I mainly wind up small skeins of yarn sometimes only 30mtres and then dye them - sold at my guild.

I don't do too many other things in life right now other than full time student at University attempting to get a BA!

pacanut (not verified)

I also spin and knit when I want to watch TV or am otherwise on the move. My first creative endeavour was making jewelery which I love but difficult to make any money from it so I just make for myself and friends now. Ihat also developed into copper sculture. The trouble is that my day job keeps demanding time (though not at the minute, one beefit of the recession).

pacanut (not verified)

I also spin and knit when I want to watch TV or am otherwise on the move. My first creative endeavour was making jewelery which I love but difficult to make any money from it so I just make for myself and friends now. Ihat also developed into copper sculture. The trouble is that my day job keeps demanding time (though not at the minute, one beefit of the recession).

Cath (not verified)

A Mathematician?  Not I!  My background is actually in the performing arts.  I used to be an actress a long while ago and did some singing too.  I do miss it, but am enjoying other creative artsy stuff.  I knit and spin and embroider and draw but am pretty much self taught in all.  My Mum's an artist so I'm hoping that some of it rubbed off.  Last year I finished a screen writing course and am meant to be writing...actually I'm meant to be writing right now!  I think I'm still inthe developing discipline stage!

Cath (not verified)

A Mathematician?  Not I!  My background is actually in the performing arts.  I used to be an actress a long while ago and did some singing too.  I do miss it, but am enjoying other creative artsy stuff.  I knit and spin and embroider and draw but am pretty much self taught in all.  My Mum's an artist so I'm hoping that some of it rubbed off.  Last year I finished a screen writing course and am meant to be writing...actually I'm meant to be writing right now!  I think I'm still inthe developing discipline stage!

lmwalker (not verified)

I am in the process of buying a beat-up but whole four-harness counterbalance loom. It will come home sometime next week. Although I've been weaving on jack looms for years, this is my first full-size counterbalance (I have a 12" table Peacock that als creates a counterbalance shed, but the scale is totally different!) This one looks like it weaves 50" or 60" -- it was in a cellar and I was really just counting working pieces. I think it is an old Union -- it has a big cast-metal ratchet wheel on the warp beam, and is otherwise wood.

My hope is to refurbish and modify it enough to take it to 18th-century and medieval re-enactments. Although I've been weaving for decades, all my floor looms until now have been jack looms, but in the time periods I re-enact, counterbalance was the available shed-making technology. (Actually, I also do "Dark Ages", for which I've got a warp-weighted loom and some tape looms.) Eventually I want to make a reed, and replace the heddles with string, and possibly swap out that metal gear for a wooden one -- well, okay, eventually I want to build a barn loom in pieces that will fit in my car -- but for this season it will be enough to get the tie-up ropes on it and make sure everything works. The differences between counterbalance and jack are significant enough that I want to be able to show the brilliance of the counterbalance design for production weaving, in terms of leveraging (literally!) body weight and gravity to manipulate a squidzillion fine garment-weight threads.

I do not have any specific questions right now, but I wanted to introduce myself, the loom, and the project. I look forward to talking with these groups about the details.