Caroline (not verified)

I've located the book, its called  "The Nettle In Nepal" and is a monograph by Susi Dunsmore for some private charitable organisation in the UK. The book is only available in the UK; I have relatives there so was able to order online from WH Smith and get it sent to them to forward on to me. I don't think Ms Dunsmore is a weaver so its not quite as straightforward as it first appears. The loom used is a two harness loom with foot peddles to change shafts, set up like the simple 2 harness rug loom, where if one harness goes down, the other has to come up. The two extra heddles would have to go in after that, but the foot peddles do not correspond with the order of the 4 harnesses. Tabby is woven with harnesses 1+4 then 2+3.  I will try to reproduce this on a frame loom first then set it up on a RH as I can cross check this with several well known twill patterns.  The Weaving Guild in London was involved with this back in the 80s, so perhaps there is someone in the UK who made notes of how this worked.

Once I have worked on it a bit I'll try to post drafts and photos. This is definitely along the lines of Betty Davenports' work and the book on ebay about 3 heddle weaving. Its coming up to midnight here so I must get some ZZZZZZs if I'm to exercise my brain cells tomorrow, lol!

davewhiz (not verified)

See page 68 of Betty Davenport's book "Textures and Patterns for the Rigid heddle Loom".  You can add additional Heddles even after your rigid heddles are threaded and your warp is tied by using String Heddles.  You do this by using a dowel and string loops to pull up the warp at the desired locations.

                 String Heddle

davewhiz (not verified)

See page 68 of Betty Davenport's book "Textures and Patterns for the Rigid heddle Loom".  You can add additional Heddles even after your rigid heddles are threaded and your warp is tied by using String Heddles.  You do this by using a dowel and string loops to pull up the warp at the desired locations.

                 String Heddle

Caroline (not verified)

hi Dave,If you have the book, I would really appreciate some constructive input on this!

The person who wrote this monograph was well aware that the techniques she described were an anomily;  the same weavers do also use backstrap looms with string heddles as per your diagram, for twills and pickup.

This technique is used on a frame loom with heddle-strung harnesses similar to a rug or barn loom and operated by treadles. The tie-up to the treadles, once the extra harness is added, does not correspond to their respective shaft numbers, although the draft and the draw down are conventional.

Two x  2 harnesses in tandem is the nearest we are going to find to using 2 rigid heddles together, which makes their technique worth examining, and I certainly will not poopoo any methodology that has survived hundreds of years, even if it turns out in the end to have little practical application to modern rigid heddle techniques. The weavers who have developed this obviously see an advantage in time and effort to continue with it for this long, as they do not weave in complete isolation and do have contact with other weavers using more standard techniques. I'm happy to see where this leads, and if it can help us become more enterprising in our own weaving.

If the author has made a mistake in recording the technique, all that has happened is that I will have learned a little more about what is possible and what is not possible - the time is not wasted. But if the author is right, and this can simplify things for us, then we all benefit!

One thing I have noticed already is that the weavers use 3 shed sticks to separate the warp, and the harnesses go either side of the middle one. Diagrams/photos will follow as I check this out. The monograph is not marked as copywrite, but I prefer not to risk using someones work without permission.

 

 

 

Caroline (not verified)

hi Dave,If you have the book, I would really appreciate some constructive input on this!

The person who wrote this monograph was well aware that the techniques she described were an anomily;  the same weavers do also use backstrap looms with string heddles as per your diagram, for twills and pickup.

This technique is used on a frame loom with heddle-strung harnesses similar to a rug or barn loom and operated by treadles. The tie-up to the treadles, once the extra harness is added, does not correspond to their respective shaft numbers, although the draft and the draw down are conventional.

Two x  2 harnesses in tandem is the nearest we are going to find to using 2 rigid heddles together, which makes their technique worth examining, and I certainly will not poopoo any methodology that has survived hundreds of years, even if it turns out in the end to have little practical application to modern rigid heddle techniques. The weavers who have developed this obviously see an advantage in time and effort to continue with it for this long, as they do not weave in complete isolation and do have contact with other weavers using more standard techniques. I'm happy to see where this leads, and if it can help us become more enterprising in our own weaving.

If the author has made a mistake in recording the technique, all that has happened is that I will have learned a little more about what is possible and what is not possible - the time is not wasted. But if the author is right, and this can simplify things for us, then we all benefit!

One thing I have noticed already is that the weavers use 3 shed sticks to separate the warp, and the harnesses go either side of the middle one. Diagrams/photos will follow as I check this out. The monograph is not marked as copywrite, but I prefer not to risk using someones work without permission.

 

 

 

davewhiz (not verified)

Now you have me thinking.  It occurred to me that if you put a String Heddle in front of both Rigid Heddles you would not be limited to the threads in the slots as long as you made your string loops large enough.  You could setup whatever configuration you wanted with no limitations.  I have not tried this, so I am just theorizing.  It might interfere with the smooth beating of the weft by the front heddle.

davewhiz (not verified)

Now you have me thinking.  It occurred to me that if you put a String Heddle in front of both Rigid Heddles you would not be limited to the threads in the slots as long as you made your string loops large enough.  You could setup whatever configuration you wanted with no limitations.  I have not tried this, so I am just theorizing.  It might interfere with the smooth beating of the weft by the front heddle.

Caroline (not verified)

My experiments have hit a "pause" button at the moment. i set the frame loom up with the sheds as she described, which is supposed to be the reverse side of Goose Eye, carefully transposed the draw down to take account of how it had been changed, and the pattern had nothing to do with draw down or the threading, grrrrrrr!  It did however make an attractive broken Twill, when I ran it through a weaving program. But you are right Dave - this does have  implications for multi-shaft threading on a rigid heddle loom, so I shall revisit this in a few days and start experimenting.

Who knows where this could lead?

One thing I did find out was that the method of organising the sheds was efficient. It should work  for RH too!

Caroline (not verified)

My experiments have hit a "pause" button at the moment. i set the frame loom up with the sheds as she described, which is supposed to be the reverse side of Goose Eye, carefully transposed the draw down to take account of how it had been changed, and the pattern had nothing to do with draw down or the threading, grrrrrrr!  It did however make an attractive broken Twill, when I ran it through a weaving program. But you are right Dave - this does have  implications for multi-shaft threading on a rigid heddle loom, so I shall revisit this in a few days and start experimenting.

Who knows where this could lead?

One thing I did find out was that the method of organising the sheds was efficient. It should work  for RH too!

BridgetJ (not verified)

 I am watching this space!

My main interest in the RH is in how to use it as a portable alternative to a 4-shaft loom, so you can imagine that I'm finding this discussion very interesting.