claudia (not verified)

Have you checked that the tension is even on all the threads?  Sometimes a few threads do not get tied as tightly as others when you are tying onto the front or lashing to the apron rod.  

Claudia

Neshobe (not verified)

It gave me the courage to post my first project!  Thanks!  (I had some missed warps too, but at least my rag rug was big enough for me to hide them using a needle with a little extra warp thread!)  I haven't used an inkle loom in years and years, so admire what you've done on it. 

claudia (not verified)

 I just tried overshot on a 4 harness loom and the threading draft I used was wrong and nothing looked like overshot until I went back and found the mistake.  I switched my treadling and now have something that looks more like waffle weave.

Pictures to follow.

Claudia, who, despite Weaver's book, does not think overshot is hot!

Alison (not verified)

 And where is part 2???  I want to see what comes next!

lkautio (not verified)

Overshot is not one of my favorites, either, but you can learn a tremendous amount about design from it.  You can do some fun things on 3 shafts with overshot, though it will look a little different from 4S overshot. 

I tried to find the draft, but didn't see it.  What page is it on?  I'm guessing there was a tie-up error, or a treadling error related to the 3 shafts.  An incorrect or missing (I'm not seeing it, but it might be my eyesight) tabby or single wrong pattern shed could create the long floats.

Laurie Autio

claudia (not verified)

While reading the Overshot is Hot book I was thinking overshot might be doable on 3shafts.  I'd love to try it with 2 heddles on the rigid heddle loom.

Off to handweaving.net to plan my next rh sample--it's overshot or drop.

Claudia 

claudia (not verified)

 The loom needs to be heavy enough to  tolerate the firm beating necessary in rag rug weaving.  I have never used a Nilus but have seen one and it looks like a good, sturdy jack loom.  I did rag rug very successfully on a TOTT loom and added extra weight to the beater with a steel rod taped to the bottom of the beater.  Worked very well.

I would go for it.  A good 4 shaft Leclerc would be a good addition to your current loom family.

This is IMHO
Claudia

kellytwo (not verified)

I just bought a Hammett Loom to make rugs, and I asked the gentleman who was selling it (who is also a rug weaver), what he thought about a jack loom for making rugs.  He said that weaving rugs require a lot of warp tension, and when you get the warp tight enough on a jack loom, you won't be able to raise the shafts enough to get a shed.

I'm so excited about my new loom.  It's not assembled yet, but as soon as it is, I'll post pictures.

Ridinteacher, your rugs are so  beautiful and your blog is such an inspiration.

Doreen

Beth P. (not verified)

Your Union Loom is a counterbalance, not a countermarch.  Both are good for rugs.  Most jack looms are not heavy enough for rugs.  The way counterbalance and countermarch both work is that as you raise some shafts the others lower.  This keeps even tension on all warp threads.  With jack looms only the threads on the shaft being lifted move, you will have greater tension on the lifted warp threads than on the warp threads that stay in place.  The Union loom is propbably better for your rugs.

Rugsbyjoe (not verified)

Hi Sad to say but a Union Loom is not a "countermarch Loom" A Union Loom is a "counterbalance Loom" Joe