claudia (not verified)

Hi Stephanie,

Welcome to Weavolution! and to rigid heddlers. 

Ok, warping by yourself.  I often am in this position and there is a thread here on Weavolution with lots of suggestions for tension improvement and problems.  I usually use an S hook attached to a loop about halfway down the warp and attach a gallon milk jug filled with water onto the hook.  The water jug is weight to provide the tension while I wind on and insert paper or sticks between layers of the warp.  It works very well with my rigid heddle loom and even with cotton usually provides enough weight to get it beamed with lots of tension.  It I am beaming tencel or something lighter or finer, I empty out some of the water (onto the house plants mostly : )

Hope that helps.

Claudia, Weavolution co-founder

jordanj (not verified)

Stephanie,

I always warp by myself and seldom have troubles. I make a lot of trips to the front of the loom to pull firmly on small groups of threads all the way across, then go to the back to wind, then to the front to pull, etc. Inserting a heavy paper as you wind the warp will help too. All of these ideas are in beginning weaving books. Cotton should not be too hard to warp evenly, but I have never used crochet cotton before.

As for your weft, Peaches and Cream is it? I have not used that either, but yes, cottons shrink a lot and the best way to determine how your final output will be is to do a weave a small sample and wash and dry it how you plan to treat your finished product. One thing you'll learn early on is to sample, sample, sample. I usually put an extra yard of warp on my loom so that I can make several samples.

Welcome to the world of weaving!

Jennifer

 

 

Caroline (not verified)

hi Stephanie, I'm another lone warper, and at the moment am using a 20/2 cotton warp doubled, with knitting cotton weft. My weft is just a bit finer than your PnC, and much thicker than my warp, so I am doing a tapestry/weft faced weave. If I beat the shed after I have laid in the thread, I get the gaps you are experiencing. However, if I change shed then beat, the weft nestles into place, and stays there. Another thing to watch out for is that you are giving the weft enough slack to go over and under the warp. Your #10 crochet cotton is about twice the thickness of the warp I am using, so you must do this if you want a weft faced fabric. If you are trying to make a more balanced weave, you have a slight problem as your warp is so much finer than the PnC,  which is why you have the gaps. Are you laying in your weft straight across, or diagonal through the shed? If you lay the weft straight across, there is not enough to compensate for the take-up, leading to gaps. I lay wefts diagonally for everything except warp faced weaves. Once you have woven a few picks you adjust the angle so you have just enough to go around everything and give you a nice selvedge.

Your rigid heddle might also be the wrong size for what you are doing - you don't say what the epi is, but I would take a guess at about 10 or 12 epi? In which case the space between your warp threads may not be sufficient for the PnC. There are a lot of reasons why you could be having this problem.

As for tension ........................................ I like to use fishing weights  with holes in them, and paper clips that go through those holes at one end, and hook onto the unruly warp thread with the other end. You can do a bunch of threads or one at a time this way Other people use film canisters, if you can get them these days, or nuts and bolts, and similar little bits of hardware supplies. I have a folding loom and have no problem getting a good tension on my cotton warps. However its much easier to get a good tension with wool or a synthetic warp that has a bit of give to it.

Cotton can shrink at different rates, grrrrr! It can also stretch, and the crochet cotton and the PnC will behave in different ways, which is why a sample is very important. Also the crochet cotton is mercerised, knitting cotton usually isn't, which can make a difference to the finished cloth. Once you know what the yarns do, you can then exploit their characteristics to get the fabric you want.

Hope this helps answer some of your questions. I'm in Australia, so your graveyard shift is my afternoon! The Europeans will come online soon, so there is usually someone around to chat with and ask questions of.

Caroline

Caroline (not verified)

Stephanie

Rather than getting your husband to cut wood to make separators, I use  mini venetian blind slats. They are plastic, and would not work so well with a thick warp but should be fine with what you are using. Wood takes up far more room than a slim plastic blind so you may not be able to wind as much warp on the beam.

From what you have said about laying in the weft, changing how you beat should go a long way to solve your problems. The PnC should give you a lovely thick and thirsty towel fabric. I'm making tapestry bags with my warp; - in very bright colours that aught to clash, but I think look fantastic together, so finishing is not such an issue.

You haven't said what brand (if any) of loom you are using. See if an Ashford rigid heddle will fit, if you are unsure of the make. Ashford has just brought out a 5 epi rigid heddle for the Knitters Loom, which is what I have, and its just the right size for PnC and other textured fashion yarns. So I should imagine that other loom makers will follow suit  shortly. If your husband is clever with his hands, he should be able to adapt any rigid heddle to fit your loom.

If you are still having problems beating your warp into place, use a sword - basically its a bit of wood with one narrow bevelled edge, much like the shaped moulding you get down at the hardware store, so that the profile is an elongated triangle. The shaped mouldings are made from hardwood, and a length of that will do the job once its sanded down. You can grasp it both ends, and beat firmly and swiftly, and it will help keep the fell line straight, particularly if there is a slight tension problem.

We all learn these things as we go along; experience is a great teacher, and there are loads of tricks and tips you find on Weavo that never make it into the weaving books! Happy weaving, and post photos if you can so we can follow your progress.

Caroline

ruthmacgregor (not verified)

Stephanie, if you're at the very start of your warp, it's normal to have to advance the front beam by more rachet-clicks than the back beam!  The back beam, loaded with warp, will have a bigger circumference than the front beam (which at this point is almost empty).  When you're halfway through your weaving, they'll advance at about the same rate, then as the back beam empties, you'll notice a discrepancy again. :-)

The most important things are these:  is your warp wound evenly and snugly on the back beam? And, does your warp have fairly even tension all the way across from side to side?  ...If those are okay, you're fine!  As you get more weavings under your belt, you'll get a feel for how much, um, imprecision you can get away with.  Sometimes it's more than you might think.

Do you still have the ball band for your weft yarn?  It should tell you whether or not the yarn is mercerised (or pre-shrunk, or some other word to indicate that it won't shrink).  If it doesn't say anything, assume that it will shrink.  ...Your plan to throw the first towel in the washer is an excellent one!  Very nice things can happen to weavings in the wash.

By the way, I love weaving from my stash!  It "forces" me to try interesting colour combinations and textures that I wouldn't necessarily seek out if I were buying all the yarns especially for a project.

Keep weaving, you're doing fine!

Ruth

ruthmacgregor (not verified)

Hi again Stephanie,

Kromski also makes an 8-dent heddle, and that might give enough spacing between warps for you to use your knitting yarns as warp.  (Wrap a strand of your "typical" knitting yarn around and around a ruler, with each wrap touching the wrap that came before, then count how many wraps there are in an inch.  Yarns in the 14-16 wpi range ought to work pretty well as warps in an 8-dent heddle.)

That said (as I imagine you're not eager to go spend more money right away!), all those knitting yarns can make super wefts!  Where there's a stash, there's a way.  ;-)

For the tension of yarn wound onto the back beam, you've already heard a couple of recommendations of the thing I do when winding warp onto the beam:  wind a couple of turns, then set the brake on the warp beam, go to the front of the loom, and gently and steadily pull on the warp.  If you're using the whole 32-inch width of your loom, divide the warp into two or three groups to make sure everything gets a similar pull.  What you're doing here is you're "snugging" the warp onto the beam, pulling out any slack that got in there while you were winding onto the beam.  You need to do this every couple of turns of the warp beam to be sure you've got it all.

The big jug of water mentioned earlier is a more automatic way to do this same thing.  The jug of water supplies a steady pull as you wind on.

On wider warps, I've been known to clamp my loom to a low table, lay the warp out as straight as I can across the floor, lay a board across the warps and pile some heavy books on top of the board, then wind on.  The warp drags the whole pile of board and books as I wind on.

It's whatever works, and whatever appeals to you.  Many paths can lead to the same good results -- and with each new warp, you'll start collecting your own favourites.

Ruth

claudia (not verified)

Oh, Susan, can we squeeze the beginnings of a "Stash busting" WAL before you leave for vacation?  I'm ready and my loom is almost empty.

Claudia

ruthmacgregor (not verified)

Gee, a stash-busting weave-along sounds like a lot of fun! :-)

I've been in and out of my own space a LOT in the last couple of years for family reasons, so I'm in the process of rediscovering just exactly what's in my stash.  Just because I haven't been home doesn't mean I haven't been shopping (if you can't weave, you might as well shop, right??), and there's a lot of very interesting stuff tucked into boxes and buried in closets here.

So let me go finish those projects-in-progress so the looms are ready for action....

Ruth

patternwhisperer (not verified)

I found this thread while browsing weavalution.

And I have lots of peaches and cream and sugar and cream kitchen cottons. And a collection of crochet cottons.

So I was wondering how your towels turned out?

trplr95 (not verified)

And remember that the rigid heddles for the Ashford 32 fit the Kromski 32 perfectly - and are cheaper.  Ashford has a 7.5, while Kromski is 8 dent.  Not a big difference, but it might help.  I made a set of placemats using the 7.5 dpi rh using Sugar'n'Cream on my Harp 32.  They ended up being firm, but not boardlike, just as I wanted. 

eta:  I think I attached this to the wrong response - sorry.

Trish