jordanj (not verified)

 Perhaps you could use one peg on a table to wind a demo warp, but wind the "real" warp at home, prior to class? 

Another thought is a collapsible horizontal warping reel that fits on a table..

sequel (not verified)

Oh what fun! 

We our program first started up we had no warping board, so we turned chairs and tables over, warped around the legs, or just about anything.  It gave the students a chance to see that they could get by on the cheap until they too could get a "real" weaving set-up.  My favorite cheapie was a three tier folding magazine stand that had six legs...

feltedbag (not verified)

Is your warp tension consistent all the way across?  I always close my eyes when I checked the warp tension so that my judgement is based just on how it feels.

claudia (not verified)

Hi Cathy,

Can you take a couple pictures so we can see what's going on?

I believe feltedbag may have it right.  When this begins to happen, you may need to check your warp and see that tension is the same on all threads.  If not, use S hooks or something to add weight at the back of the loom on the threads that are loose.  How did you attach the warp to the front apron rod?  is it lashed on or tied?  You may want to unroll your web and check to be certain something hasn't come untied.

Claudia

lkautio (not verified)

Sometimes, if you have a foldable loom, one side of the loom has partially folded.  Also, check if a thread has fallen in somewhere (heddles or behind them) and is raising the tension in one section.

Laurie Autio

jornada (not verified)

I have a questions about the sentence below....................lashed on or tied.  Could someone explain the lashed on part?

 

Thanks,

Teresa

 

 

How did you attach the warp to the front apron rod?  is it lashed on or tied?

wilowind (not verified)

 

 

The warps were tied & I'll be sure, from now on, to make sure the tension is consistent across the warp. I thought it was. Aparently it changed. I attempted to fix the problem by weaving in the part that was going uphill to make it even with the rest. It didn't look so hot, so that's one I'll keep. Thanks for the suggestions.

Willowwind

claudia (not verified)

Peggy Osterkamp has a section of Tips on her website and here is one re: lacing or lashing on.   

I usually warp the rh loom from front to back by threading the threads through the rh before cutting them and just looping them over the back apron rod that is attached to the back beam.  Then, as you would with warping back to front, I beam the warp onto the back beam using weights or something heavy to provide tension.  Then, I cut the front threads and rethread through the holes of the rh and tie into bundles of 1/2 to 1" and lash to the front beam.  

Hope that helps,
Claudia

jornada (not verified)

thanks Claudia for the reply.  I've woven several scarves on my RH and was originally taught a different method of warping the  loom.  What you've described (and I've seen on several videos) seems more logical than what I was originally taught.  So, I'll give that a try on my next project.

Thanks again!

Teresa

steve104c (not verified)

Teresa, Lashing on is tying twine or string( this is the lash) to the rod from the beam and then tying the warps onto these strings, actually tie the groups of 8 warps with a simple overhand knot then tie a slip knot in the lash and put the slip knot over the warp thread knot and pull tight ,then tie the lashes to the beam rod. This will help to tension the warp easier when tying to your beam and help to lessen warp waste. Tie only groups of 8 warp threads to each lash. Go to the "LeClerc Looms" web site and check  the video on loading their sectional beam. It  shows how they connect the warp to lashes............Steve.