claudia (not verified)

 Please tell us more of your loom saga and add pictures if you can.

Claudia

Susan G (not verified)

I was lucky. I talked Pam (shop owner) into trying weaving also so her husband put together both of our Ashford Knitters Looms and stands. The rest I had to learn on my own. The Ashford book has great instructions and Pam was happy to help anyway she could. I love my loom.

Caroline (not verified)

The Knitters Looms are great! The only drawback is that if you collapse the loom up to take it anywhere, it can upset the tension, which can be hard to set up again exactly. I love using mine, have the second heddle kit, and am gradually getting a selection of different sized heddles. There is now  5 epi rigid heddle for the fancy designer yarns. Mine is the smaller 12 inch size, and its great for small tapestries as well as scarves etc.

geeksdoitbetter (not verified)

hey there, claudia

aww, thanks for asking!

~claps~

i took a begining weaving class a few days after my loom assembly workout - the class was awesome!

weaving rocks, very hard

here're pics of the new loom, plus a close up of my first project:



all set up and purty on the stand



closer look at the heddle



this is sugar and cream cotton, soon to be a cloth napkin

cblusea (not verified)

I had a giggle when I read this I am waiting for my Ashford 80cm rigid heddle and stand to arrive it usually takes me a couple of times before I put anything together properly too.

amandolin (not verified)

Thanks for that info, but I figured it out.  The drawing I was going by is just a little wonky b/c of how they have it in perspective.

I had to talk to the people at both New Voyager and the Woolery, but I got it now, thank goodness.

 

But... I wonder if you're right in that you could just switch the heddle blocks if the pawls were positioned on the wrong side?

claudia (not verified)

Hi Shelly,

You may want to try winding your warp in 2 or 3 bouts.  If there is a logical separation point, use that or, divide it in half and wind two bouts (sections) of 129 ends each.  Once you finish winding one section, chain is off the warping board and then wind the second section or bout.  It's the easiest way to handle a warp with more ends than you think you board can handle.  Watch you tension and try to keep it as even as possible with both sections.

As for profile drafts, the description in Deb Chandler's book is quite good.  It's basically a representative draft where the blocks are shown on the profile draft and not the threading. You can have 2, 4 or more blocks and the profile shows the blocks.  The threading draft shows the threading of each of the blocks.  Blocks can have anywhere from 2 or more threads and the profile draft shows just the blocks. 

You can have different threadings for the same profile draft.  So, one draft can be used in several different ways.  Here is a profile draft and threading draft below it.  Don't use this threading draft, it is incorrect.  It should have shown the two blocks as Block A= 1,3,2,3  Block B= 1,4,2,4. 

Hope that helps.

Claudia

 

 

snaseman (not verified)

Thanks Claudia. It is very helpful. I have Deb Chandler's book and have read the section a few times. In this particular draft, there are two blocks, a gap, then the rest of the profile. I wasn't sure what to do with the gap.

claudia (not verified)

Wow, a gap.  Now, that's a great question.  I don't have that particular publication so it's hard to say.  I'd have to see it or someone with more experience with profile drafts may come to our rescue. 

Claudia

SDSue (not verified)

Hi Norma, 

Welcome to our SD Weavers Group! I live in Rapid City, where are you located? There is a yarn store in Rapid City that has a spin-in on Friday mornings; and she sells hand-dyed roving. There is also a big weaving/spinning group that meets at a church in Rapid once a month. I will get more info for it soon. The yarn store is CR Yarn and is located at 519 Main St. (between RC Journal office and Bottecellis Restaurant); phone number (605) 791-5648.  

Have a great day.

Sue