Aunt Janet (not verified)

Caroline,

   I don't really know where to find wool fine enough to use for this competition.  Do you have any suggestions?

Janet

Caroline (not verified)

Janet, can you get hold of any Merino or Rambouillet? It needs to be fine, and reasonably long because its spun worsted. I have used Merino/English Leicester cross, because a friend of mine  is breeding that cross, and the fibres are as fine as Merino. Sue McNiven made the world record with a 15 micron merino fleece she purchased in Tasmania and took back to Scotland. If you find her website she actually wrote about spinning for the Bothwell on a wheel.

Friends have suggested to use the neck or chest fibres, as that is where the finest fibres are. I gently washed the locks, because you have to save one to send in, and then I used a dog comb to align them, and spun from that. I shall do the same this year. The other tip is not to wash the skein after you have plied it, otherwise it might shrink! My spindle is a toy Barbie bike wheel on the end of a plastic paint brush with the hair pulled out, and weighs 7 grams when I take the tyre off and spins like a tornado.

I use the black tyre on it for plying. Your yarn needs to be pretty robust and has to stand going through something like one of those wheels they use for measuring roads - they had it specially made.

Its a good challenge and drove me nits for months trying to spin finer and finer!

 

Aunt Janet (not verified)

Well, i browsed the internet last evening and found a couple of sources that sell by the pound.  I really don't need a whole fleece of super fine Merino.  I have a Merino fleece that I'm combing on my Peter Teal combs.  It isn't super fine, but lovely.  One fleece will hold me for the season. 

I'll probably comb the super fine also.  If it is too short for the Teal combs, I have Vikings and mini combs which will do the job.  I'm getting excited about this competition.  Yes, I know it will be tedious when I get going, but a cool challenge.

Your Barbie spindle is cute!  I make my little spindles from a wooden knitting needle, size 2 03 three, and a bead.  I have a nice little disk bead that I got on Etsy, and a wooden one I bought at BSG a few years ago.  Either of these will make a very fine thread for me. 

I'm determined, and resolved to spin a super fine thread at our spin-off in August as a warm-up.  In this local competition we don't ply.  That is going to be quite a challenge with these thin singles.  Well, I have some time to practice.  I guess I'll be carrying my tiny spindles and super fine wool around with me the next few months.

 

weaver-dyer (not verified)

Place some "Duck" tape, sticky side up, on the breast beam or shuttle race and place a thread on the tape after it goes through the heddle and on the shuttle race after it goes through the reed.  It is slow, but the threads are kept in order and under enough tension that they don't spring back on themselves.  Marcia Kosmerchock shared this in a workshop that she taught on collapse weaving.

Janet

dteaj (not verified)

Hi Marie,

It's probably too late for this warp, but I use masking tape on the harness frame. You could suspend an extra lease stick with masking tape below the lease...

BTW, I just wound a overtwist warp (Habu wool) and found it much more difficult to control extra twists forming. I have a theory that the humidity makes the yarn a little less stable. The last time I wound off the Habu yarn was in a dry winter house.

Debbie

Cindy Jo (not verified)

I feel that I got very lucky in finding that book. It was the only book that the 1/2 price store had yesterday that was about weaving, so I definitely went in on the right day.

Cindy Jo

zinniz (not verified)

 You don't have a true tabby with this threading, but if you want to keep at it without rethreading, you might have more stability with a 1-3, 2-4 tabby. Using 1-2, 3-4 for tabby could cause a lot of problems in your block B where you've threaded 1-4-3-4.

 

claudia (not verified)

That appears to be part of the problem.  I thought I understood more about overshot than I seem to so it's back to the books for now.  I am going through Helene Bress' chapter on overshot in The Weaving Book and learning a good deal there.  I believe I have made several mistakes and am now considering changing the goal of this project from placemats to a table runner.  Not sure if that will improve things but I could finish a 48" table runner and cut it off and rethread the loom for at least 2 place mats. 

Just trying to think outside the box.  I'm open to any and all suggestions.

Claudia

lkautio (not verified)

Claudia, if you treat this as a multiple tabby weave (like M's and O's or some of the Bateman weaves) rather than overshot I think you can come closer to the original S+W idea.  An easy way to start is to think on opposites.  That is, follow each shed with its opposite.  On 4 shafts there are 7 pairs of opposite sheds (in parenthesis I put the result on your threading, with A and B blocks):

12 vs 34 (plain weave in A, pattern in B)

23 vs 14 (plain weave in B, pattern in A)

13 vs 24 (pattern in A, pattern in B on alternating sheds)

1 vs 234 (pattern in A, pattern in B on same shed)

2 vs 134 (pattern in A, long floats in B)

3 vs 124 (plain weave in A, pattern in B)

4 vs 123 (plain weave in B, long floats in A)

Five of these produce good patterns without long floats (3 thread maximum). You can combine them with one or two shuttles (different colors and/or different weights of yarn) to get different  interesting block effects.   I wasn't able to add a draft to this note, but you can draw it down easily, Try alternating between one pair for 8 threads, then changing to the next opposite pair.  There are a number of other treadlings (including various twills) which will work.  Just stay away from lifting 2 or 4 alone or 1+3+4 or 1+2+3 together.  This looks fun, so I am going to thread up a loom and see what I can make it do.  Happy weaving,

Laurie Autio

claudia (not verified)

Thank you Laurie, that is very helpful.  I have been reading Helen Bress and Weaver's Overshot is Hot and learning more about overshot.  It's a very versatile and complex structure.  Lots to learn.

Hopefully I'll get to the loom today now that I am armed with your suggestions and sample, sample, sample.

Thanks again.
Claudia