jordanj (not verified)

 Laverne,

The pebble weave is beautiful! And such fine threads! You are such an inspiration!

Hard to imagine a 90 degree day as it's been cold and rainy here in Oregon - until today that is.

Hope you have a restful and cool weekend!

MRD (not verified)

Nancy,

Congratulations on finding your new loom and welcome back to the wonderful world of tapestry.  Do you have an idea of what you want to do your first time out?  How long has it been since you last touched a tapestry loom? 

We are a small but I like to think elite group.  We may not do things quickly but the end result is wonderful, don't you think?

Mary

weaversouth (not verified)

well, I haven't really done any since I left Michelle Lester's studio in 89.  Besides the liitle hand=built loom that arrived yesterday, I finally got around to unboxing a Dryad I bought about three years ago.  It moved with me in the boxes and I unpacked it today.  Very nice loom!  Needs refinishing, but the manual for reassembling and dressing it was even included, so, whether I keep it or sell it is the next decision, but I am inclined to keep it.  The smaller one can actually easily be packed up for workshop or any other travel, while this thing, being "beyond sturdy" will have to stay put, once together.

I am going to do a workshop with Joan Griffin next month and get my "chops" back!  In the meantime, I have a folder I've been keeping for years of ideas I want to use!

Nancy C.

and thanks!

illoominated (not verified)

Your information is most helpful.  My husband and I are surrounded by beautiful pieces of a three-dimensional puzzle.  I found the model and serial number, and will email Janet.  We have the original brochure that must have come with the loom, but the pictures aren't specific enough to help us figure out where the pieces go! We've downloaded Schacht's Cranbrook Loom Instructions, but the looms are not quite the same.  Such an adventure!

illoominated (not verified)

Thanks so much!  We have a weaver's guild library, and I can preview them.

Beth P. (not verified)

Hi,

I have purchased, dis-mantled and re-assembled two old Cranbrooks.  I have the original instructions, I would be happy to copy and mail them to you.  I am in Maryland, if you are within a days drive of me I would be happy to come help in person.  I am also available by phone if I can help that way, 301-373-4403.

 

Cranbooks are wonderful looms, no matter what the age!!

 

Good luck!

 

Beth P.

illoominated (not verified)

Thanks to Beth and everyone.  Schacht supplied a pdf of an assembly manual for an older model Cranbrook.  We got the loom together this weekend.  It's gorgeous, and I can hardly wait to begin a project. 

Rugsbyjoe (not verified)

Hi Your loom is not old at all now mine is old is is one of the fist 3 first built at the start of the Crandbrook Loom Company Cranbrook Looms are still being built so just order the infromation to put your Cranbrook Loom together from Cranbrook You have a great loom Joe

jander14indoor (not verified)

I also have an older Cranbrook, love it, well worth the trouble of getting it set up.  Have you looked at the manual on the Schacht Spindle website?

http://www.schachtspindle.com/instructions/weaving/CranbrookLoomAssembl…

I found it very useful in getting my collection of parts turned into a working loom.  While there have been some changes, this should answer about 90% of your questions.

 

Differences.  

The Schacht version is set up with texsolve, yours has chains.  they do the same thing functionally and you'll mainly have to sort to get the chains to match the proper texsolve equivalent in the Schacht manual.  The Y-shaped texsolve from the inner end of the jacks to the lower lamm has an exactly equivalent chain.  There are medium long chains that go from the outer ends of the jacks to the outer ends of the shafts.  And so on.  Method of adjustment is the same, change which link is connected as opposed to which hole in texsolv.  The chains are attached with little "L" shaped bars that slip through the chain (long leg) after it goes through the lamm and the short end of the "L" pegs into a small hole next to the big one.

Instead of a screw mechanism on the cloth beam you have another ratchet.  It is attached to the handle outside the frame unlike the warp beam where the ratchet is inside the frame.

Release mechanism for the rear ratchet is different.  New Cranbrooks have a foot pedal mechanism to release the ratchet.  Old ones have a long gray handle instead.  Its is doglegged to run it through frame from inside to outside.  You have to get up and move to side of loom to release it when you want to advance the loom.

The outer frame is slightly different.  Schacht extended the frame to move the warp beam back.  On yours the rear cross beam tenons through the rear upright and the rear upright is where those stubs on the Schacht Cranbrook are.

 

I'm not sure (from memory) that there are any other differences.


Hoped that helps.  There are original manuals out there for your Cranbrook, but I don't have a copy where I'm working temporarily up in Canada.


Good luck

Jeff Anderson

Livonia, MI

jander14indoor (not verified)

Not a problem for me anymore, I converted my Bexall Cranbrook to texsolv when I added shafts 5-8 and the associated treadles.  Turned out to be cheaper than buying additional chain.  But if I had to, it would be easy enough to find matching diameter music wire and bend your own.  I say music wire because for this use you'll need hard wire, soft steel would bend out of shape too easily.

 

Jeff Anderson

Livonia, MI