merrymac (not verified)

Hmmmmmm .... I've read and reread your information concerning the placement of the warp string running through the reed.  I'm trying to remember the placement of my string and it seems to me that the string were, indeed, running higher through the reed on the new loom vs. my Gilmore.

I will have to run upstairs to my "loom room" (just had grandsons move everything upstairs for me this past weekend) and see if I am remembering correctly.  If so, then does that mean I have inadvertently purchased a countermarch/balance loom rather than the jack I thought?  The lady told me it was a jack and I took her at her word.  How goofy of me if this is so?  I'll deal with it.  LOL  :)

If this is correct, I may well have more of a learning curve than I thought?  There are two pulley type ropes slung over a rod bar and each pulley has a chain that runs to different harnesses.  For instance, pulley on one side may have one chain going to harness one while other chain on same pulley goes to harness two.  Does that make sense?

I'm being lazy right now and taking my time sipping my coffee waiting for good light to go upstairs.

Oh!  And, as far as where I am located, I am in mid-Missouri.  There is a guild in Arrow Rock, MO, that I was very interested in but have lost the information I received last fall when I was there.  I was hoping to go to their February meeting but haven't a clue as to when it meets?  Any info you may have on weaving guilds would be most appreciated.

Thanks again.  God bless.

MerryMac

merrymac (not verified)

Ah ha!  Thanks, Michael.  I was suspecting it was a CB loom after working with it a bit.  Thanks for the confirmation.

Another learning curve.  Sigh!  But I'm bound and determined to figure it out.  :)

I measured the old string heddles yesterday then put one of the old ones on the jig that came with the loom.  Boy, was it ever off in size!  Shouldn't have been a surprise considering how old they obviously were.  I also discovered the eye holes were less than 1/2" in size! 

Anyways, I then set myself down and made a few new heddles - using the jig provided - to see how that worked.  That task didn't take long as I only made 16 of them for each harness.  I now have them on and some of the problem seems to be easing as far as the way the harnesses hang.  I'm still getting a horrible shed, though.

Before I forget, did I understand you correctly that I do not need eyes on my string heddles since it is a CB?  That would sure ease my dilemma in the 1/2" size eyes!  I can get a thin thread through but shudder at the thought of trying any thicker type yarn?  If I do need the eye, then my dilemma is rather to enlarge the eye at the bottom or top of the existing jig?  Or try to space out both top and bottom? 

I also still need to figure out the correct length for cording running from the bottom of the harnesses to the individual treadles.  The current cording appears to be roping of some sort that has been tied on.  None of the cording is tied on the same length, either.  (Another huge sigh!)

I'm a bit confused (well, actually a lot) about the wood needed to fit inside the heddle bars?  I just can't wrap my brain around that one.  Sorry.  I will check more on info on CB looms.

Thanks for the info on the Missouri guilds.  I sure would like to find more info on the one in Arrow Rock.  :)

Any and all suggestions/ideas are certainly appreciated.  Thanks for taking time for this newbie.  :)

God bless.

MerryMac

merrymac (not verified)

Thank you once again, everyone.  Next time I am in the city I will see if I can locate this book.  It sounds as though it would be a good one to add to my growing weaving books.  :)

This loom seems to have taken on a mind of it's own?  I have now removed all the old string heddles, made a few new ones (until I can get to the city and check out the texsolve ones), replaced the cording to the horses (as I've learned those blocks are called I believe?), and replaced the cording from the lamms to the treadles 

Shafts still very uneven ... heading back upstairs to debate some more. 

Thanks again.  Sorry this has gotten to be such a nuicense.  :(

God bless.

MerryMac

onafixedincome (not verified)

To color the heddles, may I suggest hitting Michael's or a kitchen store for some cake decorating food coloring (Wilton)? Mix up a nice deep batch in water, submerse your heddles until they are the color you want, then hang to dry. I believe you'll need vinegar as your mordant..and maybe some heat. I'm not a dyer, you see... LOL! Luck!

claudia (not verified)

I tried that and it doesn't work on Texsolv heddles.  Texsolv is a combination of polyester and silk.  The only thing that works, I have been told, is a Sharpie.  I haven't tried it yet, your post has reminded me to do so today.

Thanks,
Claudia 

TinaHilton (not verified)

Hi Lauries.  What kind of AVL loom do you have?  Since you're using the raddle, I assume you have a plain beam.  Can you include more information, such as how wide your warp is, how many bouts, do you use lease sticks when winding on, etc.  I assume you're warping B2F and you warp the Kessenich F2B?

I primarily warp B2F on all my looms and have a cross at the back.  I put lease sticks in the cross and pull the threads through the raddle and onto the warp rod, then wind it on.  I prefer to have weights on the warp bouts while doing this and especially like using my trapeze, but I don't have a long enough top board for it on my AVL (it's 60" wide).  I can usually get by with just winding a turn or two, then pulling hard on each bout.  If I'm having trouble with tangling I'll also shake the bouts to release the tangles.

You might also post this in the general weaving forum.  I can't imagine it's specifically an AVL issue, unless I've misread your question.

Lauries (not verified)

Sorry it took so long to put more information on. My  AVL is 40 inches wide and has a plan beam. I have been warping on the back. so I have been holding the warp at the back of the loom and my husband does the winding. I do B2F. I have deceided to try something new next time I warp. I wil do it like the Kessenich. Which is I hold the warp at the front of the loom going over the top,not threaded thru the heddles. I hold it tight and again my husband does the winding.

JudyW (not verified)

I use the back to front method described in Peggy Osterkamp's books and video. It's not specific to AVL looms, so you have to make a few adjustments. I always forget to load the raddle going the right direction, since the raddle only attaches one way. Otherwise, I really like this method.

Lauries (not verified)

Judy w, thanks for the book idea. I'll check it out next time I'm at my guild. Laurie

Alison (not verified)

I just found this thread, so I'm at the party a little late! I also uses Peggy's method when beaming my baby wolf using the method she demonstrates on her DVD. She walks one through each step. During Convergence (it was wonderful to meet you!) I got Kati Reeder Meek's books, including the one on warping with a trapeze. So I'm also going to try it. I've heard so many great things about that method. Alison