eggplantlady (not verified)

Thanks for sharing, Diane by the River - your bag is terrific!  How do you keep the edges of your fabric strips from showing? 

mischiefmanaged (not verified)

I remember seeing a rag rug made on a 32" Ashford rigid heddle  loom in an old issue of their newsletter, The Wheel. I'd like to try some rag rugs but I have a 16" rigid heddle and a backstrap setup. I've been thinking I could try join some narrow strips together; it might be sturdy enough to be a rug for shoes . . .  or would it?? I could use a beater rather than the heddle to pack the weft in. Hmm, what else could I try?

claudia (not verified)

I know a number of people have had success making rag projects with rigid heddle looms. You would need an alternative method for beating, the heddle is not strong enough. 

People have suggested cutting the rags to 1/2" wide strips and using a hand beater. I have only used 8/4 carpet warp for my rag rugs and my only experience is with a floor loom, so I am the wrong person to help with ideas for making a rag rug on a RH loom. There are two factors you need to be aware of, beating, which you have covered and tension. What type of RH loom do you have and how's the tension?

Claudia

mischiefmanaged (not verified)

I have an Ashford (no-folding) 16" and it holds tension well. Maybe in January I can make a sample and see how it does.

Caroline (not verified)

I'm using my Knitters Loom for a weft faced tapestry weave at the moment, using the rigid heddle for changing sheds only, and using a heavy dog comb to pack the weft in. Its not quite rags, but the sari silk yarn I'm using is close enough, and it completely covers the warp. Tension is as tight as I can get it and is holding well, but I would not recommend it for any heavy cloth such as is needed to make a floor rug.

Once this warp is finished I won't use the loom again for anything like this, this is pushing the loom to its limits, and if the regular loom is made in similar fashion to the KL, its probably not strong enough. The weak points are where the front and back beams go into the side pieces on the left hand side, and its the front joint on mine that is a bit wobbly.  The front of the KL has a cross piece just behind and underneath the front beam, and this reinforcing makes all the difference.

PattyAnne (not verified)

Has anyone used the Great Northern loom, ORCO 74 LOOM.

I am thinking about getting one for weaving rag rugs.

PattyAnne (not verified)

Oops sorry to have posted twice...

DragonFly (not verified)

I've never seen Sally Guy's video.  I really like Peggy Osterkamps dvd Warping the Loom Back to Front.  Deborah Chandler has a video on warping front to back.  I haven't seen that one either but I've heard others say it helped them. 

villageweaver (not verified)

Are you talking about beaming or threading? For threading: I know people will take their baby wolf, fold it and secure the fold at the side with the knobs, enabling the heedles to be at a more comfortable threading level. Maybe this will help?

hlf (not verified)

Both, actually.  I tend to lean over the beams quite a bit to get them knotted properly, and for the heddles I do fold the loom so it's higher, but I suspect it still needs leg extenders to be even taller.  I'm 5'9", so the loom is just a little bit on the short side for me.

Thanks for the advice, tho'!