sandeleh (not verified)

Hi, PattyAnne

That was a great video and your dog Buddy is cute! 

Since you have added some Weavo-Help here, I wanted to ask another question:  Is there anyway to jump over the posts one has already read to catch only the new ones?  Every time I log on and choose my forums, I am put at the very first post for any of the threads I choose.   There has to be a better way, but I cant seem to find it.

Any help would be appreciated.  (I do have the auto-notify on, so I am emailed when I get a response to any of my posts).

Sande in Fresno, CA

 

PattyAnne (not verified)

Hey Franco,

 

I don't think I understand how the cardboard separator works.  If you tie the string to it, do you wind the cardboard on?

I love the idea of having a string so I can keep track of the length I've woven but am not quite understanding.

Ariaya (not verified)

 Oh cool thanks!  I'm looking forward to getting started and getting weaving!

francorios (not verified)

 
*continuing to weave along*
 
Here I have woven up to the marking knot of my measuring string. Just in time because you see I am at the end of the warp which is tied to the beam at the other side of the heddle. So now I am hand hemming the end of the towel.
 
My fringe has three ends per group. I have 128 ends divide by three is 42 groups plus 2 extra ends. So I have one extra group of 2 ends in the middle of the hem to make it come out even.

 

Then I cut the warp with about 1 and a half inch of fringe. Remove the heddle. Loosen the loom, wrap the towel on the beam and roll until I'm back to the middle where the separators are.
 
 
 
 

 

Then I remove a separator so I have room to hem the end. When done on this end, I will rotate the loom 180 degrees, remove the other separator, and hem the end. When done I'll roll the work on the loom to the beginning and hem that last end. Then I will have 4 hems on two towels. Cut the warp on the other end with 1 and half inch fringe. Remove towels from the loom.
 
I will wet finish these with wash/dry cycle with other light colored towels so I don't get dye or dark lint on them. I will cut the towels apart and put into a mesh bag to help keep the fringe looking better after the first wash.
 
Have a good day!

francorios (not verified)

It's 2 different things. The cardboard separator is to make an end of one towel and make a gap for the fringe.

The measuring string is tied to the last warp string and just hangs loose from the loom and follows as cloth is wound on the beam.

Did that make sense? Let me know. If I'm creating confusion then I am not doing this right.

Have a good day!

francorios (not verified)

How is it going on the warp stripe weave along?

Anybody have any questions, comments, or snarky remarks?

(smile)

Have a good day!

 

quejimenez (not verified)

hello all,

finally after weeks (insert 4) of waiting for my loom to be shipped it finally came this afternoon...it took me and the hubby a few hours easily to get it put together...wasn't hard but the holes were not pre-drilled big enough so it took some serious elbow grease and lots of grunting from my husband to get it all put together.

i'm so determined to make up lost time and to get weaving i'm going to try and warp my loom tonight so i can start weaving already...

i bought the kromski harp (32") so i'm going to try and use the warping board to measure my warp. my studio isn't really set up to direct warp and by it being 11pm i'm not inclined to try and make it...

i will try my best to remember to take pictures to update with later...

i have been reading and re-reading "hands on rigid heddle weaving" and my it was like reading japanese until i had the loom in front of me...so for any newbies like me...it makes more sense as you see and do...

wish me luck...hopefully when i return i'll have my loom all set and ready to go for t.v./weaving time tomorrow evening!

by the way everyone's wips are looking really wonderful! 

kiandra

quejimenez (not verified)

 can u come to my home and warp mine tonight? =)

u seem to be sooo good at it...my brain is twisted and swimming with weaving terms and what nots....

 

francorios (not verified)

Good luck Kiandra!

Keep us advised and we'll try to answer any questions you have!

Have a good day!

quejimenez (not verified)

just a quick update...

i didn't manage to warp last night, but i was up bright and early this morning and warped on my harp...and got it half-way threaded.

here's what happened (or should i say what i learned):

i started winding my warp with way too much tension and yeah...i couldn't finish the whole warp as the threads started slipping off the pegs...lesson #1 learned? don't wind too tight...even tension...not tight tension.

when i started the next warp (after i had to take the too tight warp off) i was interrupted by my 5 year old (who woke up early) and forgot the middle 2 color strip in my warp...lesson #2 learned? pay attention

the great thing is that i had my warp broken up into segments...so it was "somewhat" easier to thread the loom...easier in that if (or shall i say when) i got interrupted or needed to tend to the little ones...i wasn't siting with a whole hand full of loops that needed to get threaded...

the flip side of that is that my hanging threads are all messy...i've "stroked" them out and not combed them and that has helped somewhat but the are still continuous loops and have the guiding ties at the end of the loop...i'm hoping that as i start to wind...they will relax a bit...

i do have a teeny tiny question....

when i was holding the cross and threading the loops on the the end beam...a few times the loop would slide off the hook...i'm hoping...and this is where my question comes in...that i looped it back on correctly...if the loop falls off...how do i know that i'm looping it on correctly...

and lastly any suggestions on how to wind the warp on if i'm doing it solo? the video that come with the harp says i need to have help to keep the tension...any suggestions since my hubby will be home too late?

hope everyone is having a good day and progressing along well...

kiandra