francorios (not verified)

The hats are very handsome. What are they made out of?

Some product of felting?

Have a good day!

 

francorios (not verified)

Hmmm, I'll have to put ladies hats on the list of research.

Have a good day!

Franco Rios

bibi (not verified)

Hello everybody !

It seems I haven't really understood what "respinning" means ! (excuse my poor english !!)

Please, don't laugh at me, but what I did was, very consciously, transforming the wool as it came in a ball... which when I think about it now, didn't change anything to my wool !!!

So I can't figure exactly how to process for "respinning"... has anybody taken pictures of the way how to do it exactly ??

Thanks for your help

Michelle, who wonders how much stupidity she can dive deep in...

francorios (not verified)

That's a fair question.

Re-spinning is to take the yarn, put it on a spindle or spinning wheel and spin the yarn tighter.

As I understand it, most yarns are spun for knitting, so they are spun tight enough to hold size and loose enough to be soft. Backstrap weaving requires more strength. Adding more twist to the yarn makes it stronger.

Have a good day!

Caroline (not verified)

Michelle, to respin yarn, first have a look at the direction the twist goes. It will either be a Z twist or an S twist depending on whether the twist in the yarn goes / or \. You then spin it again in the same direction it has already been spun,  making sure you are putting more twist into it than less, so when you loosen the tension a bit it promptly spirals back on itself.

Apart from the twist turning back on itself, you will notice that the thread compacts and gets thinner and when you wind off the yarn into a ball, the ball will be more solid and smaller and your yarn will feel harder too.

this is a useful trick when you over or under-spin any yarn.

bibi (not verified)

Thanks everybody for all your explanations, I do understand now what respinning is !

I think special tools are needed to do that, so I'll forget it for a while, and may be one day, I'll try to see if I can do that ! at the moment, I will concentrate on backstrapweaving... but, then, I think I'm condemned to use only perlé/mercerised cotton, because I tried wool, and also cotton (not perlé, nor mercerised) and I had lots of problems with it, whereas with perlé cotton it is so pleasant as it slips so easily...

francorios (not verified)

Bibi,

I like using cotton yarn and cotton crochet thread, not perle and not mercerized,  in backstrap weaving and I've been very happy with the result.

Cotton is expensive is some places. Not expensive where I am. Wool is more expensive.

Have a good day!

Franco Rios

Sacramento, California

Kurt Pippin (not verified)

Hi--

I tried to add twist to a yarn last night using my Swedish bobbin winder, but the winder only goes in one direction, and that ended up unplying the yarn. Oops. I'll have better luck with 'real' spinning equipment that spins both directions.

But I did learn that I can draft with my left hand and turn a handle (as for chakhra) with my right hand, so it wasn't a wasted effort.

Pippin

bibi (not verified)

Hi Franco,

May be my cotton wasn't such good quality as yours, or may be it needed to be respun...

Good day to you, and everybody too :)

Michelle

Aunt Janet (not verified)

 We haven't talked about re-spun yarns for a while, but it has come up for me.  A friend brought over several cones of fine weaving wool.  The yarn is probably 10/2 and 20/2.  She asked me to make some sock yarn for her, so I'm respinning and re-plying.  For the sock yarn I put three of the two ply yarns together and added twist in the same direction that they were originally plied.  I filled two bobbins of this yarn and then plied these together.  It is now a nice 12 ply sock yarn. Colors are black, red and maroon all plied together, making a heathery maroon.

   Now there was plenty of yarn, so I'm experimenting with a little of the remainder to make a yarn appropriate to backstrap band weaving.  I took two strands of the black, which is the 20/2 and retwisted them as tightly as comfortable, then plied them back on each other for a nice shiny, tightly spun eight ply.  I am working on the red, but it will only be a 4 ply.  It is matching up size with the black.  These have made real nice backstrap weaving material.  The black and read are going to look great together.  I don't think I have seen a yarn like this available on the market.  So, good reason to re-spin.

   One caution.  This was very tedious work.  It takes a lot of spin, and therefore time.  I treadled like a crazy woman, but wanted it to spin faster.  I get so much exercise on my shins that they are bulging.  Wish I could divert that energy so other parts are getting a workout besides my shins of steel ;>).

 PS, I used my trusty, SLOW Louet.  I didn't want to use the charka  because I didn't think I could get as even a spin.  I really should give that wheel more of a chance.