djfiberarts (not verified)

Wow, kitty has taken over that rug! I don't blame her...it looks very comfy :) That came out so cool. How long did it take to complete?

gmadsen (not verified)

Just read all this and am replying to several of the posts. 

The 8/4 cotton rug warp works just fine - the trick is getting the sett right for the width of your cotton strips.  I've done some with 10epi with 1/2 inch strips they were placemat rather than rug heft.  6 epi with 1 inch strips wasn't heavy enough either.  I want a rug that lays down on the floor and is heavy enough to stay put.  Found a book at my library that was inspirational and informative:  Weaving Contemporary Rag Rugs.

I got the rug weaving bug again when I saw an article on chennille rug weaving in an old Dec 2008 Handwoven.  It turned out to be an EXCELLENT way to use up a LOT of knitting yarn scraps, particularly the cheaper acrylics.  OK, honestly I haven't actually done the rugs yet but weaving the chennille was a breeze.   Got overwhelmed with the complexity of designing the finished rug and planning the color order for weaving the chennille, so I just tried to make adjacent colors 'go together'. 

 

Thumper70 (not verified)

thanks,

 

yeah - it has been entertaining - I no sooner get one to give it up and the other takes over! I've clipped and washed it - looks great, in total I think it took about two weeks - the caveat here is that I only worked on it an hour here, two hours there, and there were a couple of days when I did not pick it up at all. So . . .

Towards the end I figured out a faster way to knot it - I'm still working on how to describe it - may have to be a vid - so it might take less time next time.

 

thanks again for your note,

A

djfiberarts (not verified)

Thanks for the tip. We have that book. I'll put it on hold when I get back from vacation :)

DJ

claudia (not verified)

I had some 8/4 carpet warp left on my Kromski 24" RH loom and wanted to sample with leftover fabric strips so I made a placemat  size piece, about 14" and the full 24" width of the Harp.  I was using 1" cotton fabric strips folded in half, so 1/2".  I stitched up the edges and threw it in the washing machine since it was a sample for placemats.  It came out full of holes, totally unusable and ready for one thing-the trash!  I was on the 10-dent heddle and warped with single thread in each so 10 epi.  It might work if you did 12 epi or if you alternate with carpet warp in the weft, I don't know.  It was a disaster for me and I am now winding a warp, using carpet warp, for my 4 harness floor loom to make the placemats with 5/2 cotton weft and a sett of 12.  I wasn't able to pack the rags in firmly enough with the fabric for weft.

Any ideas why my RH placemat failed?  I know, I should have taken pictures.  Believe me, it wasn't worth the pixels.

Claudia

Loominaria (not verified)

 I'm currently using all 80 cm of my Ashford reed on a baby blanket.  Actually, it's becoming 2 baby blankets, and therein I think lies the secret for me: if I'm going to warp the whole width, why not put on enough warp to make something substantial?  Part of this warp was cut off another loom, so long ago that I couldn't recall what frustration or problem caused me to cut it off in the first place.  Since it was cut, the warping was thread by thread, and I added about the same amount to a central panel to fill the width. But I look at warping as half of the weaving, rather than viewing it as the chore that precedes the weaving, so I usually enjoy the whole process, even when it's slow.

gmadsen (not verified)

Just saw this post and had to reply since I had something similar happen when my rag weft was nylon.   I think that if there isn't enough *grab* between the cotton warp and the weft material machine washing causes the warp to slip together creating the holes.  

I don't think that this has anything to do with the warp sett or weft size but may have something to do with the warp contents.    I have done warp rep with the same Mayfield 8/4 cotton warp using very rough rope as weft and it still slides as much as it can when machine washed.  Maybe this is why rug weavers so often recommend linen rug warp.  I haven't worked with it yet to know.    I do know that if you use the Mayfield cotton rug warp with cotton fabric weft the slipping doesn't occur.

Since I have heard that ANYTHING can be used as weft I guess the trick is to make sure your warp can hold it or you have to lock it with a tabby thread. 

warpdlam (not verified)

Ok I am thinking about getting started on learning this.  Where do I get started?  A book to look at?  Thanks debi

Alison (not verified)

After getting started through Laura's article, there are a number of books that you can use to help teach yourself.  One of my favorite is Geraldine Stott's Bobbin Lace manual.

I had the advantage of starting out with some lessons which made teaching myself after that much easier.  There are lace groups all over.  If you are in North America, you can go to http://www.internationaloldlacers.org/chapters.html to find local chapters of IOLI.  If you are in Australia, let me know - I can know people.

In Europe, the predominant lace group is http://www.oidfa.com/.

I also suggest that you google for a lace guild in your local area.

Talk about slow weaving...but I love it!

Alison