Caroline (not verified)

G'day everyone! I have just uploaded a set of photos to Flikr showing how I make the continuous string heddles for my weaving. Its actually MUCH much quicker than trying to get a floppy warp thread through the eye of a metal heddle, hehe!

www.flickr.com/photos/barca1au/

If you have any questions, message me here and I'll try my best not to confuse you any further!

Caroline

 

daisey27 (not verified)

I would like to make a backstrap loom. I am thinking of buying an ashford Rigid heddle 24 inch, so I will be able to use it for smaller and wider bands as I hopefully become more competent.  what is of most use, a 10dpi or 12.5 dpi.  What thickness of yarn/cotton would you use for either?

I just think it might be easier to use than the string heddles, as I am not quite sure how it works. I can see how you hold the heddles up and open the shed but not how you go down to open the shed the other way. Does that make sense.  Sorry for complete lack of terminology as I am a complete novice.

 

daisey27 (not verified)

Thanks Laverne

That does help my understanding.  I have seen pictures and drawings of backstraps but could not quite figure out what all the sticks were for.  I did see Esmecat,s blog via Ravelry and I love the outcome of her first backstrap weaving project..  One of the reasons why I am here wanting to learn.  Will have to make a list of what I need and then go hunting around the house/garage and see what I can find.

Karina

Caroline (not verified)

Kristen, Many of the belt-weaving techniques in the tutorials here are similar to techniques used on inkle looms - I found several similar techniques and patterns in the Helen Bresse  inkle book - and there are other patterns and techniques that have been successfully woven using Scandinavian hole and slot heddles - like rigid heddles but not so wide. While an absolute complete beginner may have a few problems initially, someone with a couple of weavings under his/her belt, so to speak, should be able to carefully work their way through the simpler techniques, though personally I would recommend not using the rigid heddle at all, even for a spacer - its just something else to get in the way while you learn to manipulate the sheds. In the end that will come down to personal preference.

As an aside, I have been working on three colour weaves, and managed to borrow a 4 shaft sample loom to see how some of the techniques were worked on a regular loom. I went to warp up this evening, and discovered I needed 6 sheds for a pattern that only requires 3 string heddles on the backstrap loom, and the instructions on how to organise and treadle the 6 sheds and manipulate the pickup on a multi-shaft loom were far more complicated  than the instructions given in Bolivian Highland Weaving for the identical project on a backstrap! And this was just for the belt pattern. If you wanted to add plain rep weave either side to make a wider piece of cloth, things got really tricky.

Encourage new weavers to experiment with hand-manipulated patterns! They will soon enough feel the lure of multiple shaft weaving and suffer shaft envy. This will help round out their weaving education and hopefully give them a better understanding of how cloth is made.

Kristina (not verified)

 

Hi Kerstin, I had my experiments with the RH soon abandoned, because I realized that I did not get the right feel for the technique and the pattern. Using Backstrap the pattern is manipulated by hand and can grow freely (like knitting), and the warp tension is adjusted with the body. This body-regulation, I have experienced as very important for the formation of a clean shed. With the RH it worked somehow, but I needed a little warptension to reach into the warp for pattering with the hand , and then  high tension to push the weft.
An alternative to the string heddles is weaving with  tablets/cards,  as Marijke van Epen shows in her books. This works on frame or inkleloom too and you can use up to 6 colors . You can see my cardband at the project page here: http://www.weavolution.com/node/5670

and I made this with cards too:

With this technique you can weave all the patterns shown in this group or at Lavernes blog. It´s easy but you need a lot of patience.

But I think it´s nothing to start with on RH - but with inkleloom it will work .

 

Kristina

 
 
 

 

Caroline (not verified)

I'm not saying it can't be done on a rigid heddle loom, you can weave almost anything on any loom if you try.

However the rigid heddle itself can be more of a hindrance than a help. Not all heddle positions on RH looms are nicely to the back of the loom! Some are about two thirds down the loom from the front beam, which creates a problem with getting a decent shed. Other RH looms have higher sides, which restricts accessibility for shed-making.  Some smaller RH looms may simply not be long enough from front to back. For example, the 12 inch Knitters Loom is a bit short for multiple sheds to be manipulated comfortably even with the RH moved and its stand put down, but I have another loom that is perfect - its a no-name that resembles an early Beka. 24 inches plus deep, low sides, and with the heddle stand almost on top of the back beam. Many of the modern looms do have low sides, and are long enough from front to back, it really will depend on what loom the student is using.

The techniques for the first couple of tutorials are very similar to those that beginner inklers are usually started on, so are ideal as an introduction to pick-up techniques. There are some projects in the Davenport books using simple pick-up to start the technique off. Once that is learned, remove the rigid heddle to introduce the string heddles and warp faced weaving; it should follow on quite smoothly and without too many dramas! I see no reason to restrict students who enjoy the technique from doing all Lavernes tutorials, and going on to more complicated double cloth and three colour techniques  in the Cahlander books if they have a mind to.

francorios (not verified)

Hi Kerstin,

I have used backstrap with string heddle to make balanced weave items, but I also found during my research that most of backstrap appears to be warp faced.

I have used an RH for weaving a warp faced piece. Actually I started started a balanced weave piece and realized I needed it to be warp faced. So I used the RH for shedding, pulled the weft tighter and used a stick as a beater.

See my blog entries

Autumn Taupe Narrow Scarf on Cricket

http://francosfiberadventure.blogspot.com/2010/01/autumntaupe-narrow-scarf-on-cricket.html

Autumn Taupe Scarf Finished

http://francosfiberadventure.blogspot.com/2010/01/autumntaupe-scarf-finished.html

I think backstrap works fine with string heddles. I haven't tried to weave on backstrap with rigid heddle yet, but I know many commercial backstrap kits are sold with RH.

I don't know if that helps or not.

Have a good day!

Franco Rios in Sacramento, Calif. USA

Minty (not verified)

I would love to use this web site more, but I find it very slow and confusing.

Ravelry works, why am i having such trouble here?

I like to use computers to learn and be creative, not have to learn about computers.

This could be a great place for weavers to meet, but I find it totally counter intuitive.

I might struggle on, however the slowness is really a pain, the pages won't even scroll at a normal speed.

Even typing a post is too slow for my keyboard.

I have no trouble on other web sites.

Why can't I upload a photo as easily as on Rav?

Do wish things were better so I could do more here.

Sorry this is not more positive, will keep returning in hope.

Minty

sally_libby (not verified)

I wish this site worked more like Ravelry. But, with that said, I am not having the touble that Minty is having. I just like the format of Ravelry better.

suzyhok (not verified)

I agree with Sally, and others, that Ravelry is more user friendly - so far... especially in adding new projects, BUT I am very appreciative of all the work that has gone into Weavolution and LOVE that its for weavers.

I also knit and crochet a bit, so I joined Ravelry before I heard about Weavolution.  I was frustrated when I wanted to add woven items to my Ravelry project page and was told curtly that Ravelry was not for weavers (they've since changed their tune... and make it a bit more accommodating for weavers, even adding a weaving category.)  

Weavolution allows us to offer more information to our fellow weavers, that would not make sense to other fiber artists.  It allows us to share drafts and technical information.  

I wish the adding a project page was more user friendly and less DOS-like.  I'm continually frustrated by adding yarns... not using the right terminology.  But I'll continue trying... because I love this whole Weavolution idea!