Lodi_Weaver (not verified)

Now those are slick!  Great idea!

Cay (not verified)

That sounds quite interesting, I always warp front to back, what loom do you have that an exercise ball is the correct height for?

crosstownshuttler (not verified)

What a great group! Thanks, Laura, for starting it.

I've been weaving for about 25 years as time permitted and my favorite part of weaving is the endless learning. 

I have 2 floor looms in an alcove of my living room so everything must do double duty. I keep a shelf board between the breast beam and beater of each loom as cat-proofing and a place for the bobbin winder, current yarns, sewing machine, etc. My Artisat works very well as a desk and sewing table. Wound bobbins, scissors, tape measure, etc. are on a folding tray table that I put next to whichever loom I'm using. 

Oddly enough, I get more weaving done now in this well organized small space than I did when I had three times as much space.

Alaire Rieffel (not verified)

 

My favorite tool is a blue plastic clamp usually used in hospitals to clamp off iv cords.  They are available retail from Dravon at 1-800-654-1976.  Although they are plastic, I have never known one to break.  They can be pricey in quantity, but sharing a large order is a great thing for a guild to do.  I wish weaving retailers would carry them too.  Believe me, you will want lots of them once you try them!  (I have no relationship with this company except being a devoted customer.)

Essentially they work like scissors, except when you close them around a group of yarn/threads, they stay closed until you release them.  I use them to replace almost all my overhand knots when threading and sleying.  I also use them to clamp onto the texsolv below a treadle to hold the  treadle up so I can adjust the cords.  I

 

 

Alaire Rieffel (not verified)

 

In response to your request to introduce ourselves, I am a 63 year old retired lawyer now working as a lactation consultant and patient care technician at DC's Children's Hospital.  (I  think of it as being a recovering over-achiever!)  My husband and I have lived near Dupont Circle in DC for 35 years.  We have 3 grandchildren and hopefully there will be more to come.  I weave on an 8S Glimakra and a 4S Reed, plus an 8S tabletop Voyageur.  I especially enjoy dyeing my yarn

Currently I am looking for DC area weavers who want to get together in areas accessible to public transportation.  If you know of any, I can be contacted at [email protected].

dorothystewart (not verified)

 Hi there ! I live in the south west of Scotland and have been weaving for about 5 years, since I retired !

I brought a Harrisville loom home from New hampshire and then built it up here in Scotland. My weaving is all self taught and I have learnt a lot from Laura's blog just recently and from the on-line groups.

I have just finished a scarf project using Shetland yarn. I tried Laura's suggestion of basket weave edging with a twill draft instead of floating selvedges. I was very pleased with the result once I learnt to leave it alone and not fiddle ! A couple of questions for Laura if I may ? 

Do you ever use a wider band of basket weave on the selvedge and can this technique be used with any draft, not just twill ?

Looking forward to being part of weavolution and this group

Dorothy

RuTemple (not verified)

O Help?

What, O dear efficient weavers, is the best way to deal with having counted out (and beamed on) too few threads of warp yarn? I misouncted my supplemental warp and have (*ahem*) over ten necessary threads to warp Somehow.

What's the collective wisdom for whether I should roll off and re-beam with the correct count of warp threads, or add them in with weights over the back beam? It's an 18-foot warp, mostly heddled up at this point.

*blushing* but hopeful...Ru

Sharon (not verified)

It sounds to me as if you are describing a hemostat.  You can buy them on line from www.firemountaingems.com  Just put hemostat in the search.  If purchased in quantity the price per piece goes below $1.50 each. 

   I mainly use them for repair threads--they would solve Ru's problem nicely--because I tension the replacement/repair thread the same as its neighbors and clamp it to about 1/2' worth of warp as close to the warp beam as I can.  I can weave for some time before having to get up to reposition it.

   The clamps grip very, very well having been designed to keep small blood vessels from leaking in a surgical field.

   Sharon

KokoSam (not verified)

Laura thanks for setting this up, great, but what is the difference between here the groups and the forum? and will we need to switch back and forth?