jenadina (not verified)

Thanks for the update! I'd love to play, but well, it looks like greek to me. I like goose-eye a lot though, so I might give it a go someday.

Caroline (not verified)

Thats pretty much what the Nepalese do. The diagrams in my earlier posting are of how the loom is set up for 4 shed weaving, and how the sheds are picked to put on the heddles. The 2 original sheds become 1 and 4 in their set up on treadles one and two, and then they add sheds 2 and 3 and treadles 3 and 4. This is done by hanging the extra heddles over the original harness bar in between the originals, not adding by a new one. Your photo certainly clarifies this!

Caroline (not verified)

Thats pretty much what the Nepalese do. The diagrams in my earlier posting are of how the loom is set up for 4 shed weaving, and how the sheds are picked to put on the heddles. The 2 original sheds become 1 and 4 in their set up on treadles one and two, and then they add sheds 2 and 3 and treadles 3 and 4. This is done by hanging the extra heddles over the original harness bar in between the originals, not adding by a new one. Your photo certainly clarifies this!

francorios (not verified)

Y'ALL CRAZY!!! *

But I like it.

Have a good day!

(*Translation: All of you are quite insane!)

francorios (not verified)

Y'ALL CRAZY!!! *

But I like it.

Have a good day!

(*Translation: All of you are quite insane!)

claudia (not verified)

I keep coming back here and reading this post and trying to figure it all out.  What a fascinating loom you created Deb.  It's hard for me to see everything but I'm enjoying reading Caroline's notes and looking at the photos you posted.  I have only used a counterbalance loom a couple times, this weaver was born and raised on the jack loom.

Give me time, I'll have questions.  Wished y'all lived a little closer.

Claudia, soggy in DC

claudia (not verified)

I keep coming back here and reading this post and trying to figure it all out.  What a fascinating loom you created Deb.  It's hard for me to see everything but I'm enjoying reading Caroline's notes and looking at the photos you posted.  I have only used a counterbalance loom a couple times, this weaver was born and raised on the jack loom.

Give me time, I'll have questions.  Wished y'all lived a little closer.

Claudia, soggy in DC

francorios (not verified)

This might be of interest to readers of this thread

From the files of the rabbitgeek:

10/10/08

4 Harness Conversion for Rigid Heddle Loom - Cheap!

If you want to try twill weave with your rigid heddle, you will have
to add heddles or harnesses. A neat trick was just posted on the internet a few days ago.

Leigh Dudenhoeffer added string heddles and harness sticks to her
rigid heddle loom. This site shows pictures and description of the
conversion.
http://fiberfanaticblog.artisticexpressionsinwoolandglass.com/

Click on "Loom Frame and How to Use Your Table Loom As a 4 Harness Loom!!!"
(two short articles on the page, large pictures)
http://fiberfanaticblog.artisticexpressionsinwoolandglass.com/TableLoom.htm

There is also a VIDEO of weaving on the modified loom 10/09/08
http://fiberfanaticblog.artisticexpressionsinwoolandglass.com/WeavingVideo.htm

The RH actually sits in the holding slot. The string harnesses go
behind the RH since the area in front of the RH is used for the shed.

Be sure to make the recommended visit to
Marla Mallet's website for instructions on primitive loom
construction, heddles, and heddle bars.
http://www.marlamallett.com/loom.htm

Don't put warp through the little holes in the RH, put two threads
through each slot. The RH is used as a reed to maintain spacing. A
comb is used beat/place the weft.

The process is not as fast as using multiple rigid heddles. Advantage is
the cost is low and it uses your existing rigid heddle loom frame. It
give more possibilities to existing equipment for the cost of sticks and string!

It is a very clever application.

Much applause to Leigh Dudenhoeffer for sharing her loom conversion
trick on the internet.

Have a good day!
Franco Rios

francorios (not verified)

This might be of interest to readers of this thread

From the files of the rabbitgeek:

10/10/08

4 Harness Conversion for Rigid Heddle Loom - Cheap!

If you want to try twill weave with your rigid heddle, you will have
to add heddles or harnesses. A neat trick was just posted on the internet a few days ago.

Leigh Dudenhoeffer added string heddles and harness sticks to her
rigid heddle loom. This site shows pictures and description of the
conversion.
http://fiberfanaticblog.artisticexpressionsinwoolandglass.com/

Click on "Loom Frame and How to Use Your Table Loom As a 4 Harness Loom!!!"
(two short articles on the page, large pictures)
http://fiberfanaticblog.artisticexpressionsinwoolandglass.com/TableLoom.htm

There is also a VIDEO of weaving on the modified loom 10/09/08
http://fiberfanaticblog.artisticexpressionsinwoolandglass.com/WeavingVideo.htm

The RH actually sits in the holding slot. The string harnesses go
behind the RH since the area in front of the RH is used for the shed.

Be sure to make the recommended visit to
Marla Mallet's website for instructions on primitive loom
construction, heddles, and heddle bars.
http://www.marlamallett.com/loom.htm

Don't put warp through the little holes in the RH, put two threads
through each slot. The RH is used as a reed to maintain spacing. A
comb is used beat/place the weft.

The process is not as fast as using multiple rigid heddles. Advantage is
the cost is low and it uses your existing rigid heddle loom frame. It
give more possibilities to existing equipment for the cost of sticks and string!

It is a very clever application.

Much applause to Leigh Dudenhoeffer for sharing her loom conversion
trick on the internet.

Have a good day!
Franco Rios

lambspin (not verified)

 I have been using rigid heddle looms for classes, particularly the Cricket. I teach odd, esoteric weaving techniques, (knotted pile, soumak and pick-up inkle) and the looms work very well for me.

I have some experienced weavers taking my classes, and they are often not interested in using the rigid heddle, until they see the single peg warping method. 

New weavers don't have any pre-conceived notions about warping, so they simply accept it and move on. 

Everyone gets up and weaving faster.  Everyone (so far) has liked the looms.  Some have purchased afterwards (I'm not a vendor, they have to buy from someone else).