Hi everyone

I am looking at buying a used Glimakra Ideal 4H 6T countermarche loom.  The issue I have is that I  want an 8H loom.  I've never owned a countermarch before so I don't know what I have to buy or what is involved with the upgrade.  It doesn't look like Glimakra has an upgrade "kit" for the Ideal.

Any help is greatly appreciated!

Thank you.

Comments

ingamarie

Check with Joanne Hall, they can do almost anything with a Glimåkra-- joanne hall <[email protected]>  and are very easy to work with. The US site (assuming you're in the US) is http://www.glimakrausa.com/ and joanne is the US rep. I'd be surprised if there isn't a solution for you.

marie

 

fiberphoenix (not verified)

Hi,

Thanks for responding. 

According to the Glimakra USA Pricelist and Woolery.com it does come in 4H/6T countermarch but these sources don't say how to upgrade.

 

fiberphoenix (not verified)

Hi,

Thanks for responding. 

I emailed Joanne yesterday but she hasn't responded.  I don't want to leave the seller hanging since she has others interested in the loom so if someone knows what I'd actually need to buy I'd appreciate the help.  I've already downloaded the pricelist and catalog from Glimakra USA but I don't know what I need so it's not much help.

C

 

Cathy (not verified)

Joanne was at CNCH and said that she would be teaching at John C. Campbell Folk School in North Carolina.  I can't remember if she was scheduled for last week or this week, but likely the reason that you have not received an answer is that she is traveling.  I am sure that she will answer you as soon as she see's your e-mail.  Both she and her husband are GREAT to work with, and I know they will be able to help you. (If she is at the folks school this week, it may be next week.  I did not have internet access when I was there taking a class from her last year.)

Cathy

runamuckweaving

 Joanne is at the Campbell school this week. She was flying out last Saturday. Your reply might be delayed although Ed might be at shop and if you give a call, he might be able to answer your question.

claudia (not verified)

Hi,

I faced a similar situation a couple weeks ago and with Joanne's assurances that she would be available to help and knowing everyone here will lend a hand, I bought it.

I can't tell you what to do, I just know you'll be in good hands if you buy the loom and I don't think you'll ever regret owning a Glimakra.  Figure it this way, if you buy it, get it set up and decide it's not for you, chances are good you can sell it.

There is someone with an ad on the Glimakra site looking for an Ideal, it's about halfway down the page.  There's an opportunity right there.

Claudia

ingamarie

ed's email is [email protected]  he's also very helpful.

I can't say enough nice things about the Halls, they're very sweet, very helpful and really willing to find a way. And Glimåkras are very adaptable. It's a great loom.

m

fiberphoenix (not verified)

Hi everyone,

Thanks for all the help.  I just spoke to Ed and he's going to email my options.

This is exciting and difficult.  I'm a new weaver and I'm just getting use to the looms I have. ( A 2H CB rug loom, 4H CB Leclerc, and 4H Kessenich  jack)  I warp front to back and set my looms up with a skeleton tie up.  I never change it.  The Glimakra is my "dream loom" but it's completely different from what I've become comfortable with.  I'd hate to get frustrated and end up disliking weaving but I don't want to miss out on the dream.

It's nice to have a support group for fiber and loom junkies!

 

ingamarie

You can set up the Ideal as a CB loom (with pulleys, not roller bars like the LeClerc)  at first if you want to get your feet wet. Then switch it over to the CM when you get used to it. Laila Lundell's book  The Big Book of Weaving also has tons of info on on this type of loom. You may even find yourself warping Back to front and changing your tie ups after a while :)

marie

 

EvaHall

 Hi,

 I have a Glimåkra Ideal CM with eight shafts. I bought it "used", that is it had been resting in its original wrapping for 19 years, since the first owner died before she ever opened it and her husband insisted on leaving it where it was. When the husband died their daughter sold it to me, and it has served me well for 2-3 years. From the papers coming with the loom I could see that it had been upgraded to eight shafts and that that was something new at that time. The CM kit was in one piece that I could just lift out of the package and place on top of the loom. I see that the kit is available, at least in Scandinavia,  so that you can upgrade your Ideal if you have one without CM.

 

Good luck with the Ideal!

Eva

fiberphoenix (not verified)

Thanks Marie,

I've had The Big Book out of the library several times and intend to buy it if I buy the Ideal. 

Getting the counterbalance parts is the top of my list.  Being a new weaver I don't want to rush in to the 8H but I'd like to know what it will cost if and when I decide to upgrade.  I definately want the CB though.  Then I can use CB for balanced weaves and play with CM for unbalanced.  I really want the hanging beater too.  It's beginning to look like I have a Glimakra in my very near future.

Whew!  This is tiring! 

fiberphoenix (not verified)

Hi Eva,

What a wonderful story came with your loom! 

I've got pictures of the parts that make up this loom and the CM looks like what you describe - all one piece.

Thanks

 

Sara von Tresckow

Just FYI - you can't change a loom from CB to CM in less than a day.

You pretty much set it up for several projects one way and then decide if you want to change it out.

The Swedish CB looms used with horses do not have a problem with unbalanced weaves, though. 

fiberphoenix (not verified)

Thanks Sara.

I don't have much of a problem doing unbalanced weaves with my Leclerc either but I've only tried 3/1 twill.  It doesn't have a shed regulator but it still made a nice shed large enough for my big shuttles.

Does anyone here have experience using CB for more than 4 harnesses?  If it's possible I think I'd prefer it over CM because my body already complains if I try doing to much.  I'm pretty sure it wouldn't like complex CM tie ups.  I've seen tie up diagrams for more than 4 in The Big Book of Weaving which I thought were for CB but I'd like to hear opinions from people who have experience.

Thanks everyone!

 

Sara von Tresckow

 Honestly, the fear that everyone has about CM tieup changes is highly overblown.

There is a way to set up 4 shafts and 6 treadles that will do about 80% of the patterns in Davison's "Handweavers Pattern Book" - basically, plain weave, 2/2 twill, overshot, rosepath, monk's belt, M's and O's and others - you dedicate 2 treadles to tabby - either the two in the middle or the two on the outside. The other 4 you do a basic 2/2 twill tieup - 1 & 2, 2 & 3, 3 & 4, and 1& 4. I've already gone over a year without a change - and then it was only to change the 2/2 twill to a 3/1 which is not terribly difficult.

Couple this fairly universal tieup with looping the cords around the treadle and pegging them at the lam level where you need only bend over the warp beam to make adjustments and changing the loom occasionally is not all that much work.

Those CB tieups in the Lundell book are time honored and used widely in Europe.

fiberphoenix (not verified)

Thanks Sara,

I may have to pick your brain more when and if . . .

 

fiberphoenix (not verified)

Hi everyone!

Just a bit of an update. 

I bought the Ideal today.  It's an older one.  It's 80cms which is the Ideal size for my space without having to sell some other loom.  Although it was advertised as CM and the rolled up "guts" was CM the un-used CB parts were there still wrapped in plastic.  I'm switching to CB until I get use to the loom then I'll consider changing to CM before I upgrade or just upgrade to 8H CB.

I haven't done anything but set her up but I already love her.  She's extremely sturdy and beautiful!

Thank you everyone for your help and encouragement.

C

runamuckweaving

 CONGRATULATIONS! And happy weaving!

Submitted by Anonymous (not verified) on