I wonder if any of you have the help the Louet magic 70cm dobby electronic dobby loom.
I have just purchased a second-hand loom which has never been used.
I came with a manual but no instructions for the electronic part.
The problem is that I am not able to send a request from my software to the loom --Help
see below for more info
I have sent am email to Louet but I wnat to play with it NOW...
I anyone has an electronic copy of the manual I would love to have a look at it.
Adrienne
Nowich UK
The story so far.
Loom set up all working - Electronic box powers up
By holding the small white button as I switch it on I am able to get it to do a self test -
the hooks above the knife are all pushed forward in sequence this continues until I switch it off
When I switch it on normally (not pressing the white button) the top red and green lights are on but the bottom green light flashes.
I have tired both a USB cable and the supplied serial cable which I have connected to my computer via a USB to serial converter.
I have tried both Weavmaker and PixeLoom but have not managed to send a signal to the loom.