Hi All.  It is December 13th and I have 2.5 weeks to fulfill a 2008 new years resolution, to weave something.  I keep buying looms but I keep not weaving anything because I HATE warping a loom.  I promised myself that this year I would get past that.

I am almost there but as usual there is a problem.  I have a Mountain table loam and am concerned that warp is too thick for the beater.  Is that possible?  I am using Lion Brand Homespun to weave a very simple scarf.  Anyone got any ideas?

Comments

Caroline (not verified)

Count out the number of slots and eyes in your heddle for an inch - that will give you the ends Per Inch - epi - now double that, and that will give you the number of wraps per inch your yarn should be. Because plain weave warps and weft yarns wind around each other, you allow half the wraps for the warp and half for the weft ( if you are using the same yarn).

There is an article on this page:

www.bellaonline.com/articles/art15510.asp

That will explain yarn size classification to you, and what the sizing means.

If you have a 10 epi heddle, you will be looking at a yarn of approximately 20 wpi.

To find the number of wraps per inch of any yarn - wrap it around a ruler, making sure each turn of the yarn touches its neighbours, but is not crowded, and count how many turns it takes to cover an inch.  Don't pull the yarn tight as you wind or it distorts and gives a false result. This will give you a ball-park guesstimate - because we all wrap differently.

You can also find the wpi of the Homespun using this method.

 

 

Submitted by Anonymous (not verified) on