6/5 I think I'm going to have to cut my header and rethread due to lack of planning, but I'm playing around with what I have now. I used two shafts to give the edges a plain weave selvedge and I'm reconsidering using them for additional patterning and letting the edges go native.

6/8 Yay - rethreading is not necessary, tie up is done and towels are underway.

6/10 These were going to be stowed away as Christmas gifts, but I'm finding I need housewarming presents and suchlike much sooner. I've never done the cut some fabric off and tie the rest back to the loom trick before, that is way cool!

Sigh. after wet finishing the first set of towels, I found I didn't account for 10% shrinkage so they are on the small side, having shrunk around 4" lengthwise. I wove in a plain-weave border between towels and calcualted 24" total between. Pfeh.  There is extra warp I put in to play around with, so I should still get 5 sets of towels (three per set).

 

Comments

Claudia Segal (not verified)

Ahh, thus is how we learn.  I think we have all faced a project that we had great plans for and it turned out to be a great learning experience and fell short of our expectations.

I find shrinkage/take-up lengthwise is an important calculation.  Have you seen Mary Rios' Weaving calculator HERE.  It works quite well and takes all this into consideration.

I realize you completed these last June.  We are offering several classes for warping and you can read about them HERE.

Claudia

sandra.eberhar…

I'm not sure how you intend for your towels to be used; I sell a lot of towels that will be gifts, and I expect that the end use may be ornamental or usage. A towel that is used is washed often, and hems withstand this much better than fringe.  I think it takes about the same amount of time to hemstich or hem; it does take more warp to weave a hem.

Finished Length Unit
yards
Finished Width Unit
yards
Length Off Loom Unit
yards
Length on Loom Unit
yards
Number of Shafts
8
Number of Treadles
8
Project Status
Finishing
Sett Unit
epi
Width off Loom Unit
inches
Width on Loom Unit
inches
Submitted by Anonymous (not verified) on