I thought I would need a special loom or special heddle to weave bands. I made a strap for a bag using my rigid heddle, a butterfly wrap instead of a shuttle, and the handle edge of a dinner fork for a beater.

When looking at the photo, I could see the weave was still a bit loose. I need to draw in more. Pulling the weft thread draws in the warp.

Band weaving on a rigid heddle

 

 

Comments

Sillylittlebear

Most inkle looms or bandlooms are basically two-shed unless you hand-manipulate your fiber, so a RH is just fine. It may get a bit "off - balance" feeling if you have a wide loom and a narrow band, but it shold work just fine.

 On inkle looms, it's common to:

Open the shedPass/throw shuttleClose the shedAdjust the weftBeat"Rinse and repeat"

That means the loom can "take what it wants" from the weft, and adjusting with an un-beaten but closed shed means it behaves better. (Mostly)

If you want to maintain a common width, an easy thing to do is to take an index card or something similar, (one lady uses clear Con-Tact) snd mark it with the width you want. You can even put a single or double slot in it so it can just ride the band. It helps you eyeball as you go. Not quite a temple, maybe just a "chapel?"

 

Nice work!

Submitted by 10ashus on