Hi,

I've been teaching myself to weave on my 4 shaft floor loom for the past year or so.  And now that i'm working with finer yarn on more delicate projects I've noticed that I may have warp tension problems.

I usually work with the warp on a very high tension, as I find it easier to throw the shuttle, and generally feel more comfortable with it, on a higher tension I also find that I skip less warp threads; although this doesn't always help.  After reading a little lately and getting 1m into my current project I've realised that this may be too tight.  As I wind the project forwards the weft distaughts, this problem in the past has sorted itself out once the project was removed from the loom but this time, with 2ply cotton and 1 1/2ply merino it seems a little more permanent.  

Is there any way to avoid this? is it a warp tension issue? or just a product of having a loose weave?....

(its worth noting that my warp varies in colour and thickness, in some spots I also have double warp, and very occasionally tripple (using a 1ply cotton).  My sett is 18epi)

I understand that my varrigated warp isn't helping the problem but i've encountered this issue when using a plain warp also...

I've cut off the 1m that i've completed and plan to tie the rest of the warp up again and continue, hopefully avoiding the distortion that I encountered last time....

I will also try advancing the warp in smaller amounts and see if this helps... any other tips for now or in the future would be appreciated,

Thanks!!

 

 

Comments

pammersw

Could you post a photo of what is happening? 

christophermichael

Thanks here you go,.... the images came up the wrong way but turn them 90 degrees in your head :)

christophermichael

Sorry heres a decent size photo.
My weft is black merino wool, you can see where it gathers in straightish sections across the weft.... I've noticed that sometimes this happens as the work progresses across the front beam and continues to get worse as it advances.

Artistry

ChristopherMichael, When I see puckers I think tension. Different kinds of cloth need different kinds of tension when you weave them. It would be my guess that you have the tension on your warp too tight. I think your tension is so high that When you release the brake to advance your warp , you are getting a lesser tensioned warp , creating a pucker when you crank up the tension again. The reason I think this , is one way to create puckers is through tension. Also the straight marking going all the way across the warp at intervals that look like warp advancement marks. So I would back off the tension. I don't know if this is a correct assessment but I'd give it a try.

ReedGuy

If your warp is simply 2 ends or 3 ends per heddle and not 2-ply and 3 ply, it should tension evenly. The problem comes when the ply is different or different fibre mixes used across the warp, say some cotton, some bamboo, some rayon yarns mixed. What about your packing of the warp, what are you doing? It almost sounds like upper layers (wraps of warp on the roller) are cutting into lower layers. Are you using warp sticks?

christophermichael

Thanks Cathie I think you're right.. My tension is too high :/

christophermichael

Hi reed guy, my warp is indeed varying ply... I didn't consider this to be an issue until I started winding so I just continued. It hasn't been as troublesome as I'd thought but the end result just isn't that tidy. Packing the warp: I have several layers of sticks (1 at each layer) and then newspaper after this. The warp is quite long. I used the yank n crank method (for the first time) Thanks for your reply

Artistry

Taking a break here from my tapestry and see that ReedGuy has posted. I think he has a some good points. There could be some tension problems when you beam , that's why you like to crank it up , as you say because you have fewer skipped threads, the threads are less likely to stick with a tight warp. But the skipped threads could be caused by slack threads in areas when you are beaming. Having a tight even tension on smooth threads, with sturdy packing material ( such as sticks, there's been a discussion of this on Daily Weaverliness this week ) will cure drooping ends. Also another valid point is that of mixed warps. When you have larger areas of one kind of fiber next to another area of a different kind of fiber I have found they may need to be tensioned differently. This is one instance where someone would use a double back beam, or weights. If you strain the fibers that need less tension , that might create puckers, I don't know. One last thing , if you were using wool as weft it might cover up some of this problem ( I'm not saying go there, just illustrating a point) because that fibers is stretchy. Mohair is not stretchy and it's my belief that while it's got this fluffy surface the core filament is not going to give an inch thus showing any mistakes you have made. Just my thoughts, Cathie P.s. your reply to RG posted after I posted this:)

Sara von Tresckow

Part of your problem is the variance in elasticity in the yarns used. They behave differently on the loom and will produce differential shrinkage when washed.

Many weavers use just these properties to control the differential shrinkage and make creatively puckered or pleated fabric.

For perfectly smooth fabric you should consider similar or same fiber properties rather than mixing and matching.

Yes, if you crank up the tension as much as possible, this will exacerbate your puckers, but with a lighter tension, they may not disappear.

ReedGuy

Different weight of yarn alone, besides being different fibre, will have different take up. You can get away with it on about 3 yards before stuff goes haywire. You need more than one beam to mix yarns. That is what I'm doing today, is laminating some wood to turn another beam on the lathe for supplemental warp. ;)

ReedGuy

I was typing the same time as Sara with some of the same responses.

Ann A

I am only a newbie but I am working on a project where the tension is perhaps not quite perfect. I find if I beat lightly with the reed before putting the shuttle through it "cleans" up the shed of any sticky warp threads and the shuttle goes through much more smoothly. It may be something to try?

christophermichael

Thanks Cathie, Sarah and reedguy; i hadn't anticipated the need for different tensions across differing fibres, although now i've learned my lesson it seems quite obvious.  you live and learn.  I will continue with a weft fibre that will hides my 'oops'.  I still think the project will be worthwhile.

Thanks for your help.

will attempt double beaming one day :)

christophermichael

Ann, thats a great idea, as there's only a few cheeky culprites that catch.  
Thanks for the tip! 

Submitted by christophermichael on