I just got for free an 60 year old handmade loom and it appears to have a creel attached to the front of the loom near the warping beam.  It is a counterbalance floor loom

How is a creel used?  What is the purpose of a creel?  

Comments

Peg R

I believe that creels are used in rug weaving. They allow a continuous supply of warp directly from a spool rack, rather than winding warp onto the back beam. I have never seen one in use, though.

ReedGuy

May also (a guess here only) be used if doing a pile warp, where it has to be slack and gets taken up faster than the ground cloth when weaving terry cloth or bath towels. I intend to make one  myself, similar in sorts, for this very purpose.

Sandy13

This handmade counterbalance floor loom is currently in pieces.  I am waiting until spring to clean up the parts and put it back together again. It appears to have wooden parts from industrial looms from the Crompton and Knolls Loom company. It was designed by a Swedish weaver back in the 1950's.  

I visited the Boott Cotton Museum in Lowell MA to do some research on the various parts of this loom.  The Boot Cotton Museum has a working weaving room.  (It was fun to see all the industrial looms busily making cotton cloth.)  I affectionally call my new loom ... my Frankenloom.  I hope it works!

ReedGuy

A foot powered loom is just a simple machine. Others might think they are complex and sophisticated in some way, but not really. You can make it work if you have the parts all working. I think of a loom as an analog computer. You have to program every draft into it with cords and yarn instead of 1's and 0's opening and closing gates in silicone wafers with instructions from a sequence of codes. These codes are replaced by treadling and threading sequences and with cords on treadles that move shafts up and down. And a more powerful CPU between your ears. There, not so ominous after all. :)

Sara von Tresckow

Your initial posting confuses me. The warp beam is at the back of the loom. Before we can help you identify the pieces, you'll really need to assemble the basic frame with shafts and beater, put up a photo, and then ask again.

Sandy13

Sorry... when I wrote my post I was orienting myself looking at the warping beam and thinking it is near to me so the front.

However, the creel is actually attached to the treadles and is located in front of the warping beam which is in back of the loom.  I hope this makes sense.

Sara von Tresckow

Somehow your use of creel is still confusing - please look up how to upload a photo and let us see just what you are referring to. There is more than one device that can be called a creel.

Submitted by Sandy13 on